Topic: How to rust your hood (Read 23775 times)

1991civicsi · « **on:** January 23, 2010, 11:34:40 PM »

HT does have Tech

http://www.honda-tech.com/showthread.php?t=2629241

drivin96 · « **Reply #1 on:** January 24, 2010, 12:16:26 AM »

rustin hoods is the most retarded thing i've ever heard of, any one that does it needs to swim down to the bottom of a pool and play with a scratch and sniff sticker

ADSR · « **Reply #2 on:** January 24, 2010, 12:18:14 AM »

that shit is fucking gay

d112crzy · « **Reply #3 on:** January 24, 2010, 12:24:56 AM »

Quote from: drivin96 on January 24, 2010, 12:16:26 AM

rustin hoods is the most retarded thing i've ever heard of, any one that does it needs to swim down to the bottom of a pool and play with a scratch and sniff sticker

NoPistons! · « **Reply #4 on:** January 24, 2010, 03:52:40 AM »

It would be much cooler to strip a hood down, sand it with high grit, polish it to a mirror shine and then clear it, then buff the clear.

Got retinas?

clwtwizted · « **Reply #5 on:** January 24, 2010, 04:31:29 AM »

Quote from: ADSR on January 24, 2010, 12:18:14 AM

that shit is fucking gay

Quote from: drivin96 on January 24, 2010, 12:16:26 AM

rustin hoods is the most retarded thing i've ever heard of

Quoted for the truth.

t_cel_t · « **Reply #6 on:** January 24, 2010, 08:18:46 AM »

bring your car to wisconsin in the winter, you'll get your rust

PhilStubbs · « **Reply #7 on:** January 24, 2010, 09:02:11 AM »

Quote from: NoPistons! on January 24, 2010, 03:52:40 AM

It would be much cooler to strip a hood down, sand it with high grit, polish it to a mirror shine and then clear it, then buff the clear.

Got retinas?

you cant polish mild steel. you would have better luck giving it a brushed finish and clearing it

WPPF · « **Reply #8 on:** January 24, 2010, 11:52:59 AM »

I have seen polished mild steel on sculptures.

jarebear667 · « **Reply #9 on:** January 24, 2010, 12:06:16 PM »

clear wont stick. and fuck any of that. just provoking hondas rust problem. lol

ironcrx · « **Reply #10 on:** January 24, 2010, 01:52:51 PM »

rear quarter and rocker panel rust is bad enough. No need to instigate more honda rust

onlyflash944 · « **Reply #11 on:** January 24, 2010, 04:06:49 PM »

i've personally always wanted to have an entire car cromed

PhilStubbs · « **Reply #12 on:** January 24, 2010, 04:17:15 PM »

Quote from: jarebear667 on January 24, 2010, 12:06:16 PM

clear wont stick. and fuck any of that. just provoking hondas rust problem. lol

depends on the clear. there are some clear paints and powder coats made for bare metal

7808 · « **Reply #13 on:** January 24, 2010, 04:51:27 PM »

i think this was started on accident by people like me, that drive around with a certifit primer black hood too cheap to get it painted, eventually it started to turn brown from corosion and weather

VW jetta driving faggots thought it was some new cool thing and turned it into a trend, which later got back around too 17yr asian boys on honda-tech

ochoa · « **Reply #14 on:** January 24, 2010, 05:17:53 PM »

do you think this trend will move to "rusting" entire cars b/c if it does im sitting on a gold mine here in Iowa

random-strike · « **Reply #15 on:** January 24, 2010, 06:50:59 PM »

Quote from: ochoa on January 24, 2010, 05:17:53 PM

do you think this trend will move to "rusting" entire cars b/c if it does im sitting on a gold mine here in Iowa

ahaha

malichite · « **Reply #16 on:** January 25, 2010, 07:22:13 PM »

Just looking for the "proper way" to rust a hood. WTF!!!

ochoa · « **Reply #17 on:** January 25, 2010, 07:37:16 PM »

I see this new trend taking body shops out of buiness hahah sorry Jearbear.....

Phate · « **Reply #18 on:** January 25, 2010, 07:38:47 PM »

Quote from: malichite on January 25, 2010, 07:22:13 PM

Just looking for the "proper way" to rust a hood. WTF!!!

That pic made me angry. Everything on that car is tastefully done. Except the hood. I'd say it should light on fire, but that will just make even more of the car have the "desired" rusted look.

onlyflash944 · « **Reply #19 on:** January 25, 2010, 08:15:25 PM »

http://en.wikipedia.org/wiki/Hydrochloric_acid

i cleaned some slump cones at work a few years back with muratic acid. it definatley ate all the concrete off the metal cones, came back the next day and they were rusted to shit. my boss was like who the fuck cleaned those, the surface is calibrated? i blamed my black coworker

malichite · « **Reply #20 on:** January 25, 2010, 08:18:07 PM »

glustic · « **Reply #21 on:** January 25, 2010, 08:40:07 PM »

Quote from: onlyflash944 on January 25, 2010, 08:15:25 PM

http://en.wikipedia.org/wiki/Hydrochloric_acid

i cleaned some slump cones at work a few years back with muratic acid. it definatley ate all the concrete off the metal cones, came back the next day and they were rusted to shit. my boss was like who the fuck cleaned those, the surface is calibrated? i blamed my black coworker

HAHAHA! That is the funniest shit I have heard all day!!

And fuck this new rusting bullshit. That is the gayest fucking thing I have ever heard of doing to a car.

PhilStubbs · « **Reply #22 on:** January 25, 2010, 08:44:54 PM »

Muratic acid is an effecient way to remove concrete from something? I have a bunch of fence posts with concrete on them that I want to get off so I can reuse them

ryan89crx · « **Reply #23 on:** January 25, 2010, 09:14:43 PM »

Honda guys copying VW nutswingers....what's next? $:-\$

Perfek360 · « **Reply #24 on:** January 25, 2010, 09:57:20 PM »

wow, after reading that thread i need to go wash the gay off me.......

onlyflash944 · « **Reply #25 on:** January 26, 2010, 02:09:14 AM »

Quote from: SecksyPeePee on January 25, 2010, 08:44:54 PM

Muratic acid is an effecient way to remove concrete from something? I have a bunch of fence posts with concrete on them that I want to get off so I can reuse them

i'm talking about like concrete residue. Just the stuff that sticks like after you would dip the pole in the wet concrete and pull it back out. It's going to take quite a while to remove the two bags of cement you poured in the hole that is still attached to the fence posts. I would suggest a large hammer of some sort for a start.

Vinegar is a much cheaper (and less caustic) substitue that I was supposed to use to clean those cones. I didn't know we had a large cooler full of it to soak the shit in for a few weeks. I did that the next time and the shit didn't rust.

malichite · « **Reply #26 on:** January 26, 2010, 02:22:43 AM »

If your going to fuck your self in the ass with a giant dildo while sluping on herp infested cocks and fuck up a perfectly good car, at least do it the right way.

Phate · « **Reply #27 on:** January 26, 2010, 02:24:25 AM »

Quote from: malichite on January 26, 2010, 02:22:43 AM

If your going to fuck your self in the ass with a giant dildo while sluping on herp infested cocks and fuck up a perfectly good car, at least do it the right way.

I like the busted windshield and the random vice grips

ochoa · « **Reply #28 on:** January 26, 2010, 03:31:22 AM »

N/A michael needs to take some pointers for his homemade roof rack from that white

widebody93 · « **Reply #29 on:** January 26, 2010, 06:37:06 AM »

Quote from: Phate on January 26, 2010, 02:24:25 AM

Quote from: malichite on January 26, 2010, 02:22:43 AM
If your going to fuck your self in the ass with a giant dildo while sluping on herp infested cocks and fuck up a perfectly good car, at least do it the right way.

I like the busted windshield and the random vice grips

It looked like bird shit on my phone

News:

Author Topic: How to rust your hood (Read 23775 times)

WPPF