Topic: cummins discussion thread. (Read 136796 times)

buk9tp · « **Reply #60 on:** March 04, 2010, 04:13:50 AM »

this thread is face palm levels of fail.

CSaddict · « **Reply #61 on:** March 04, 2010, 07:05:28 AM »

http://issuu.com/jjl171631/docs/o303p_mil

hotrex · « **Reply #62 on:** March 04, 2010, 09:14:49 AM »

this thread is making me impotent

turbob16hatch · « **Reply #63 on:** March 04, 2010, 09:20:15 AM »

Just an fyi on the importance to proper teaching and how going to a class will do wonders.

I never welded anything in my life. So i went to a local welding school/fab shop and took a $300 8hr class on tig welding. They told me how to do everything for a first timer from how the machine works to spoting what a good weld looks liek, etc, etc...

Now in this 8hrs i went from knowing jack shit to being able to run t-joints and weld pipe. Albeit not well or pretty looking but i could lay a bead down, and not fuck shit up like you. BTW, i almost went through a full 300+ cu. ft. tank welding that day. So i got a ton of actual weld time.

So whats the point, get someone that knows a thing or two and have them sit you down and teach you things.

jay · « **Reply #64 on:** March 04, 2010, 09:27:01 AM »

sharpend the tungsten and tried to weld arc still wouldnt start.. (i can now hear gas flow though)

so i set the ground clamp onto the vice itself and tried to weld didnt get an arc..

after laying down a bead and going back for a second.. it started arcing without scratch start

and i just fucked around for a minute.

got to go downtown

atleast now i know that the machine works and its just my fail

still need to get a flow regulator though..

so 200cu ft tank @ 15cfm will go empty in 13 minutes?

jay · « **Reply #65 on:** March 04, 2010, 09:40:39 AM »

btw there seems to be no difference between setting the machine to 100amps or 0 amps lol

t_cel_t · « **Reply #66 on:** March 04, 2010, 01:30:23 PM »

Quote from: jay on March 04, 2010, 09:27:01 AM

sharpend the tungsten and tried to weld arc still wouldnt start.. (i can now hear gas flow though)

so i set the ground clamp onto the vice itself and tried to weld didnt get an arc..

after laying down a bead and going back for a second.. it started arcing without scratch start

and i just fucked around for a minute.

got to go downtown

atleast now i know that the machine works and its just my fail

still need to get a flow regulator though..

so 200cu ft tank @ 15cfm will go empty in 13 minutes?

no you should be good for around 13 hours

glustic · « **Reply #67 on:** March 04, 2010, 03:55:39 PM »

At least this thread wins at something..... failing!

crxvtec91 · « **Reply #68 on:** March 04, 2010, 05:20:07 PM »

This post is FTW

92CXyD · « **Reply #69 on:** March 04, 2010, 06:51:23 PM »

Thanks buk for keeping me from making the same mistakes whenever I start tig welding. :yes:

This thread is somewhat helpful. ;D

Joseph Davis · « **Reply #70 on:** March 04, 2010, 07:31:10 PM »

chris M did you a favor directing you to community college welding classes, and to the old guy at the welding supply shop. Old dudes at welding shops are the greatest people alive, they make baby Jesus and hot women with low self esteem look rude and uncaring. They will hold your hand through everything and try to hook you the fuck up if you simply ask.

jay · « **Reply #71 on:** March 04, 2010, 07:48:29 PM »

fuck it gonna sell everything fuck this noise

nock · « **Reply #72 on:** March 04, 2010, 08:08:28 PM »

the problem here is one of two things, the welder, or the weldor.

sorry, couldnt help myself.

malichite · « **Reply #73 on:** March 04, 2010, 09:13:11 PM »

Quote from: jay on March 04, 2010, 07:48:29 PM

fuck it gonna sell everything fuck this noise

$30 shipped on the remainder of your stainless that isn't fucked up.

bigwig · « **Reply #74 on:** March 04, 2010, 09:21:20 PM »

Quote from: jay on March 04, 2010, 07:48:29 PM

fuck it gonna sell everything fuck this noise

I hope you are kidding.

jay · « **Reply #75 on:** March 04, 2010, 10:39:57 PM »

Quote from: malichite on March 04, 2010, 09:13:11 PM

Quote from: jay on March 04, 2010, 07:48:29 PM
fuck it gonna sell everything fuck this noise

$30 shipped on the remainder of your stainless that isn't fucked up.

ummm

all in scd10 ss this is what i have left
4 ft of scd10
20 90 degree bends
4 90 degree short radius bends
6 tee's

also have a bunch of flanges from weir

snm95ls · « **Reply #76 on:** March 04, 2010, 10:40:42 PM »

Quote from: jay on March 04, 2010, 07:48:29 PM

fuck it gonna sell everything fuck this noise

You will go far in this world with a can-do attitude like that.

Man up, get some fucking help, and learn a new skill.

turbob16hatch · « **Reply #77 on:** March 04, 2010, 10:43:35 PM »

Did you seriously just quit? You fucking d-bag.

As said man the fuck up and learn something.

malichite · « **Reply #78 on:** March 04, 2010, 10:45:02 PM »

Quote from: jay on March 04, 2010, 10:39:57 PM

Quote from: malichite on March 04, 2010, 09:13:11 PM
Quote from: jay on March 04, 2010, 07:48:29 PM
fuck it gonna sell everything fuck this noise

$30 shipped on the remainder of your stainless that isn't fucked up.

ummm

all in scd10 ss this is what i have left
4 ft of scd10
20 90 degree bends
4 90 degree short radius bends
6 tee's

also have a bunch of flanges from weir

Ok, fine....$50

glustic · « **Reply #79 on:** March 04, 2010, 11:45:43 PM »

Quote from: turbob16hatch on March 04, 2010, 10:43:35 PM

Did you seriously just quit? You fucking d-bag.

As said man the fuck up and learn something.

jay · « **Reply #80 on:** March 04, 2010, 11:51:26 PM »

it was a joke.. i just welded my first 2 pipes together without burning a hole through the damn thing...

pretty sure my amp selector is fucked.. there is no difference between 0 amps and 100 amps lol

i welded.. its ugly.. but its a weld

im even more hyped up too

put together the band saw today that should help out alot tomorrow with cleaner cuts and shit...

i fucked up my cup earlier so its hard to weld till i get a new cup

buying a bench grinder tomorrow and im confident ill be able to lay down a halfway decent bead

Joseph Davis · « **Reply #81 on:** March 05, 2010, 12:08:29 AM »

Quote from: jay on March 04, 2010, 11:51:26 PM

pretty sure my amp selector is fucked.. there is no difference between 0 amps and 100 amps lol

Quote from: jay on March 04, 2010, 11:51:26 PM

buying a bench grinder tomorrow and im confident ill be able to lay down a halfway decent bead

The first statement precludes the second.

If the welder is fucked I will buy it at a discount and fix it for myself. LMK.

nock · « **Reply #82 on:** March 05, 2010, 04:04:57 AM »

TAKE YOUR SHIT TO THE WELDING STORE AND MAKE SURE IT WORKS!!!

CSaddict · « **Reply #83 on:** March 05, 2010, 09:27:11 AM »

The amp control is on the troch from what you showed me in the picture. Did you use that?

Don't give up. Have someone give you a hand. Buk up, you'll get it. Its not something you will be good at over night. We all told you that.

TTC · « **Reply #84 on:** March 05, 2010, 10:11:15 AM »

This thread should be stickied, where is the bukmani.co lineup for products.

Joseph Davis · « **Reply #85 on:** March 05, 2010, 10:14:23 AM »

Quote from: nock on March 05, 2010, 04:04:57 AM

TAKE YOUR SHIT TO THE WELDING STORE AND MAKE SURE IT WORKS!!!

jay · « **Reply #86 on:** March 05, 2010, 02:00:03 PM »

Quote from: nock on March 05, 2010, 04:04:57 AM

TAKE YOUR SHIT TO THE WELDING STORE AND MAKE SURE IT WORKS!!!

local welding store is a bunch of fucking assholes

i need to find me a miller dealer

jay · « **Reply #87 on:** March 05, 2010, 02:04:22 PM »

nope just called up 2 dealers and they laughed

no one is gonna look at my shit and tell me if its working good or not

how should i word my request

turbob16hatch · « **Reply #88 on:** March 05, 2010, 02:26:18 PM »

You serious?

It's simple, tell them your having problems with your welder and you need someone to come look at it. they send some guy to come look at it and test it. You ask him to set it up properly if it's not. You pay him money because your a fucking idiot that has no ability to set up a welder, or take anyones advice.

brine04 · « **Reply #89 on:** March 05, 2010, 02:37:46 PM »

Quote from: jay on March 05, 2010, 02:04:22 PM

nope just called up 2 dealers and they laughed

no one is gonna look at my shit and tell me if its working good or not

how should i word my request

Try not to sound Arab.

News:

Author Topic: cummins discussion thread. (Read 136796 times)

bigwig