Topic: rHMT gokart (Read 6144 times)

turbostd · « **on:** March 03, 2010, 11:16:45 PM »

So I traded a old p4 computer I had for this thing. Its a 2 seater and has shocks all around. Its supposed to run but needs a belt and brakes. No idea wtf im going to do with it lol. Im thinking of putting a bigger motor on it but idk. If anything its worth a lot more then the computer i gave for it haha. (sorry about the crap pics only had my phone with me when i looked at it. still need to figure out how to get it home lol.)

jagojon3 · « **Reply #1 on:** March 03, 2010, 11:28:11 PM »

Sweet deal!

Joseph Davis · « **Reply #2 on:** March 04, 2010, 12:04:56 AM »

Very nice

88dx · « **Reply #3 on:** March 04, 2010, 12:07:03 AM »

Id get drunk and crash into shit with it :yes:

Jorsher · « **Reply #4 on:** March 04, 2010, 12:28:52 AM »

I'd give a P4 for that any day.

d16forlife · « **Reply #5 on:** March 04, 2010, 01:33:35 AM »

Why is it covered in cotton?...

;D ;D

ryan89crx · « **Reply #6 on:** March 04, 2010, 01:36:16 AM »

Good deal, I'd trash the fuck out of that thing lol

Oh...
http://www.d-series.org/forums/forced-induction/119400-turboed-my-buggy.html

d16forlife · « **Reply #7 on:** March 04, 2010, 01:54:20 AM »

Quote from: ryan89crx on March 04, 2010, 01:36:16 AM

http://www.d-series.org/forums/forced-induction/119400-turboed-my-buggy.html

Adam Lofton · « **Reply #8 on:** March 04, 2010, 11:09:29 PM »

Quote from: turbostd on March 03, 2010, 11:16:45 PM

No idea wtf im going to do with it lol.

Put a Twin turbo LS7 in it so Johnny can fap to this thread.

colt45 · « **Reply #9 on:** March 05, 2010, 08:17:11 AM »

if you dont end up doing anything with it, box it up and send it to whitey

SloS13 · « **Reply #10 on:** March 05, 2010, 09:12:14 AM »

too bad you don't live in SC...Wait did I just say that?

http://columbia.craigslist.org/mcy/1628147486.html

turbostd · « **Reply #11 on:** March 05, 2010, 03:20:57 PM »

Well I go the thing home yesterday. Fit right in my buddies jeep lol just had to take the cage off. I just went out to look at it and for the hell of it i wrapped a rope around the starter thing on the flywheel (pull starter is broke) and one quick tug the thing started right up

My cousin said he hasn't messed with it since summer so it must be a good motor lol. The motor on it is a Subaru/robin not a techmusa like i though it was. Anyhow it sound pretty good. The steering is really tight on it for some reason unless you lift the front off the ground so i think the king-pin bushings are bad. So to be ready to drive the thing needs

1: a belt
2: king-pin bushings
3: 1 front tire
4: brakes
5: a pull starter, although it starts so easy with just a rope wraped around i wont worry about this too much.

Anyhow if i get board with it woping 6.5 hp im going to put a snowmobile or bike motor on it or something. I do have a geo metro sitting here i might part out if the frame is bad. I was thinking it would be cool to build a sub-frame and use the geo motor/trans/suspension on the back of it

keelay · « **Reply #12 on:** March 06, 2010, 02:40:10 AM »

Quote from: turbostd on March 05, 2010, 03:20:57 PM

I was thinking it would be cool to build a sub-frame and use the geo motor/trans/suspension on the back of it

Good bye steering, at least with the skinny pedal pressed.

Eggylshatch · « **Reply #13 on:** March 06, 2010, 02:49:00 AM »

I'm confused to as why there is question marks in the title still?

turbostd · « **Reply #14 on:** March 06, 2010, 05:26:44 AM »

hmm now that you mention it i have no idea why i did that lol I was really tired when i started this thread so meh. anyhow ill fix it.

Adam Lofton · « **Reply #15 on:** March 07, 2010, 06:29:21 PM »

You were thinking of putting a bigger engine in it there by baiting the rest of us for suggestions.

4G63T

LS7 TT

D15/D16 turbo

Rotary (for planned obsolescence)

Joseph Davis · « **Reply #16 on:** March 07, 2010, 06:41:42 PM »

I wire/tune an F23A1 powered rock crawled buggy on Wednesday. I think it's a great idea.

turbostd · « **Reply #17 on:** March 07, 2010, 08:31:45 PM »

ya my fab skills are not that good so something semi-simple would be best to start. I was thinking like maybe a snowmibile motor or something would not be that hard. or maybe a small-is bike motor.

Quote from: Joseph Davis on March 07, 2010, 06:41:42 PM

I wire/tune an F23A1 powered rock crawled buggy on Wednesday. I think it's a great idea.

Friend of mine wants to start on a d-series crawler/buggy if he ever gets all his other projects done. Plan is to use a z6 and obd0 auto trans. he has the motor/tranny and a set of axles out of a toyota truck i think lol.

Sinister · « **Reply #18 on:** March 07, 2010, 09:49:14 PM »

You have a couple complete D engines laying around, and atleast 1 tranny that I know of, and a few ecu's. Get to it

n2o_2k · « **Reply #19 on:** March 07, 2010, 10:00:57 PM »

Sweet deal. I wish i had the space for such a thing.

turbostd · « **Reply #20 on:** March 09, 2010, 06:37:12 PM »

Well this might be getting out of hand lol. I just made a deal on another kart

Traded some more older pc stuff that i dont need for it rofl. At least its getting some of my computer shit out of the house but now the garage is filling up

Whitey · « **Reply #21 on:** March 09, 2010, 06:43:01 PM »

Quote from: colt45 on March 05, 2010, 08:17:11 AM

if you dont end up doing anything with it, box it up and send it to whitey

why would I want it?

glustic · « **Reply #22 on:** March 09, 2010, 06:54:11 PM »

Word, now you just need more power!

turbostd · « **Reply #23 on:** March 09, 2010, 07:05:44 PM »

indeed im looking for a 2 stroke of some kind for it. keeping an eye on cl for a wrecked bike or something.

t_cel_t · « **Reply #24 on:** March 09, 2010, 08:18:43 PM »

yamaha 850cc 3cyl 2 stroke

turbostd · « **Reply #25 on:** March 11, 2010, 02:53:45 PM »

My gokart had a baby

traided more usless pc shit for this thing lol Im too fat and dont fit in it but a neighbor guy offered me $100 when he saw me unloading it from the hatch haha. Looks to be home made or made in shop class. has a running 3.5hp? b&s motor on it. I think im gunna sell it to fund parts for the other one.

arsenio · « **Reply #26 on:** March 11, 2010, 02:56:50 PM »

nice hemorrhoid doughnut seat.

turbostd · « **Reply #27 on:** March 11, 2010, 03:33:25 PM »

yup lol i got stuck in this thing while trying to test it out haha im just gunna sell it to fund parts for the big one. I would need to at about a foot to the middle of it to fit in it but its perfect for the neighbors kids.

7808 · « **Reply #28 on:** March 12, 2010, 02:09:04 PM »

i wouldnt put any type of car engine on that thing. maybe a light motorcycle/dirtbike engine. either way id trade a p4 for that anyday. id trade a p4 system for a 6pack

News:

Author Topic: rHMT gokart (Read 6144 times)

Adam Lofton

Adam Lofton