:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Official RHMT TANK! that's right i said a TANK! (link)

Pages: [1] 2   Go Down

Author Topic: d16 coupe build/project  (Read 7227 times)

forcdincivic

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 37
d16 coupe build/project
« on: June 22, 2010, 01:34:20 PM »
Well...its a long process but its coming along a little better now. I bought it on February 16th after my last one turned out to be a disaster...my plans are boost and it will happen...not sure if I want to wait until winter or by this summer, but we will see. My order of plans as of now are lip-wheels-boost-paint.

So this is how it looked when I got it from the lot...



It needed a little work but nothing major...so I thought...when I bought it the exhaust was all bent and cracked up, so the guy took some $ off and I ended up just going to Lou's for a cheap fix for now....but I was surprised at how good it actually sounds.

Then I had problems with the heat and coolant...so I replaced the thermostat, radiator cap, and fan relay switch but to no avail was it fixed...so I knew it had to be this...



So while replacing the headgasket I went ahead and tried to clean up the valves and stuff as well as I could before putting it back together...






Then I got some Eibach springs and Tokico Struts from Dan on the site...

Before



After



Then while lowering it...couple bolts broke and having to buy the bushings and finding time to press the old ones out and new ones in would have been more $ and hassle so I just bought some blackworks racing LCA's, which are actually pretty beefy and nicely done.



on the car...(I know I should have sprayed the struts when they were off)





And a few shots of how it sits now....dirty as hell.







June 14th Update

450cc Injectors and Walbro 255 fuel on are en route :devil:
Logged

forcdincivic

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 37
d16 coupe build/project
« Reply #1 on: June 22, 2010, 01:35:28 PM »


stripping started, ready for the fuel pump to drop in...off to the store to get some body work done...pics will be up
Logged

forcdincivic

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 37
Re: d16 coupe build/project
« Reply #2 on: June 22, 2010, 01:36:18 PM »
Ready for paint :D





Logged

forcdincivic

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 37
Re: d16 coupe build/project
« Reply #3 on: June 22, 2010, 01:37:14 PM »
little work got done today



the grill is taken out, waiting on the new one to arrive along with an OEM si lip to put on before paint...rolling the fenders in a little bit as well for some wide wheels
Logged

forcdincivic

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 37
Re: d16 coupe build/project
« Reply #4 on: June 22, 2010, 01:39:28 PM »


Logged

NaturalDecimal

  • Guest
Re: d16 coupe build/project
« Reply #5 on: June 22, 2010, 01:41:25 PM »
you have one month to see positive manifold pressure. If you fail to do so, please delete your account.
Logged

forcdincivic

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 37
Re: d16 coupe build/project
« Reply #6 on: June 22, 2010, 01:43:19 PM »
what? lol this is the first time ive ever posted or been active on here...is that some joke saying if I dont have my turbo build done in a month you want me to leave? lol thanks for the warm welcome douche bag. :)
« Last Edit: June 22, 2010, 01:44:59 PM by forcdincivic »
Logged

jabberwock

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1135
Re: d16 coupe build/project
« Reply #7 on: June 22, 2010, 01:49:00 PM »
TITS
Logged

forcdincivic

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 37
Re: d16 coupe build/project
« Reply #8 on: June 22, 2010, 01:50:49 PM »
Logged

jagojon3

  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 17261
Re: d16 coupe build/project
« Reply #9 on: June 22, 2010, 01:51:22 PM »
It's not a joke.
Logged

Turkey soup pancakes sir

LS1pwNzJ00

  • FagoJon is queer bait
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4064
Re: d16 coupe build/project
« Reply #10 on: June 22, 2010, 01:51:28 PM »
pussy
Logged
http://<ltltimg src="quotquothttp://27.media.tumblr.com/tumblr_l3b3icaMwV1qzy9ouo1_500.jpg"quotquot nbspnbsp width="quotquot200"quotquot height="quotquot400"quotquot>gtgt

forcdincivic

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 37
Re: d16 coupe build/project
« Reply #11 on: June 22, 2010, 01:53:49 PM »
Quote from: jagojon3 on June 22, 2010, 01:51:22 PM
It's not a joke.

so every single person on this site has boost? lmao yeah okay. this site sucks then. but i already have the setup so ill just wait til the last day just for you ;)
Logged

forcdincivic

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 37
Re: d16 coupe build/project
« Reply #12 on: June 22, 2010, 01:54:23 PM »
Quote from: LS1pwNzJ00 on June 22, 2010, 01:51:28 PM
pussy

you just want me to post a picture of it...
Logged

jagojon3

  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 17261
Re: d16 coupe build/project
« Reply #13 on: June 22, 2010, 02:01:53 PM »
Logged

Turkey soup pancakes sir

forcdincivic

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 37
Re: d16 coupe build/project
« Reply #14 on: June 22, 2010, 02:02:32 PM »
Logged

speedjunky01

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1015
Re: d16 coupe build/project
« Reply #15 on: June 22, 2010, 02:07:20 PM »
Post porn NOW you fucking bitch



Pics of the future setup, just waiting on flanges they are finaly state side :D
Logged

speedjunky01

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1015
Re: d16 coupe build/project
« Reply #16 on: June 22, 2010, 02:09:21 PM »
Tits, cheap boost setups, being a Ghetto mufuka, and more tits and you will go far on rhmt
Logged

TheMadScientist

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1937
  • I'm like Batman and Shit
Re: d16 coupe build/project
« Reply #17 on: June 22, 2010, 05:46:02 PM »
Worst noob ever! You are a moron and absolute idiot now take you nigger faggot wanna be build thread and learn to make a proper intro post. You've been registered here for over a month you should know this shit. Make a proper thread or go hang yourself.
Learn the proper etiquette of RHMT or GTFO noob.
Read this and learn:
http://www.realhomemadeturbo.com/forum/index.php?topic=25.0

Logged
Why would I not be surprised if your pink slip included "quotquotthen Mr Davis overturned the table while shouting, HOWS THAT FOR FLUID MECHANICS?!"quotquot?

LS1pwNzJ00

  • FagoJon is queer bait
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4064
Re: d16 coupe build/project
« Reply #18 on: June 22, 2010, 05:52:48 PM »
Quote from: speedjunky01 on June 22, 2010, 02:09:21 PM
Tits, cheap boost setups, being a Ghetto mufuka, and more tits and you will go far on rhmt

Close but this is how its done

Quote from: speedjunky01 on June 22, 2010, 02:09:21 PM
Tits, cheap boost setups,TITS, being a Ghetto mufuka, TITS, and more tits and you will go far on rhmt


Fixed  ;)
Logged
http://<ltltimg src="quotquothttp://27.media.tumblr.com/tumblr_l3b3icaMwV1qzy9ouo1_500.jpg"quotquot nbspnbsp width="quotquot200"quotquot height="quotquot400"quotquot>gtgt

keelay

  • Cheddar Bob
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2333
  • Function>Form
Re: d16 coupe build/project
« Reply #19 on: June 22, 2010, 06:05:46 PM »
Has anyone mentioned tits?

You need to post them.
Logged
The 2 fat bitches from the internet fucked me. Except for one, she didn'#039#039t.

dvst8r

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3737
  • Unobtainium
Re: d16 coupe build/project
« Reply #20 on: June 22, 2010, 06:24:29 PM »
Logged
There are two kinds of people: Sheep and sharks. Sharks are winners and they don'#039#039t look back '#039#039cause they don'#039#039t have necks. Necks are for sheep.

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: d16 coupe build/project
« Reply #21 on: June 22, 2010, 07:13:56 PM »
Just ban this faggot already.
Logged

forcdincivic

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 37
Re: d16 coupe build/project
« Reply #22 on: June 22, 2010, 07:38:12 PM »
Quote from: Joseph Davis on June 22, 2010, 07:13:56 PM
Just ban this faggot already.

suck my dick you stupid twat waffle. Sorry that I havent impregnated my girlfriend and ruined all chances of living my life and turbo'ing my car so gtfo out of my thread fuck ball....


and tits...

Logged

forcdincivic

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 37
Re: d16 coupe build/project
« Reply #23 on: June 22, 2010, 07:43:55 PM »




Logged

TheMadScientist

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1937
  • I'm like Batman and Shit
Re: d16 coupe build/project
« Reply #24 on: June 22, 2010, 07:49:13 PM »
Those tits are  marginally acceptable. Did you even look at that thread I posted for you. I was trying to help.
You stupid fuckbag you will be banned for not following proper rhmt protocol.
Logged
Why would I not be surprised if your pink slip included "quotquotthen Mr Davis overturned the table while shouting, HOWS THAT FOR FLUID MECHANICS?!"quotquot?

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6790
  • I look around and all I see is Smegheads
Re: d16 coupe build/project
« Reply #25 on: June 22, 2010, 07:52:40 PM »
Noob stay Wednesday  ;D
Logged

LS1pwNzJ00

  • FagoJon is queer bait
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4064
Re: d16 coupe build/project
« Reply #26 on: June 22, 2010, 08:31:36 PM »
Wow JD, that noob almost ZING!!!'d you.   He was close atleast.


And to the noob, you better be able to dish it out as hard as we give it to you.  If you can't make it past our hazing you aren't fit to be here, so prepare for battle.
Logged
http://<ltltimg src="quotquothttp://27.media.tumblr.com/tumblr_l3b3icaMwV1qzy9ouo1_500.jpg"quotquot nbspnbsp width="quotquot200"quotquot height="quotquot400"quotquot>gtgt

Teg2boo

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4261
Re: d16 coupe build/project
« Reply #27 on: June 22, 2010, 08:59:59 PM »
You should have kept the $$ of the fuel pump for a good tune. You're not going to max out a stock pump with 450cc...

Logged


damn you guys too? its a fucking forum not a court room!
 Its not a forum its a gang.  

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: d16 coupe build/project
« Reply #28 on: June 22, 2010, 09:23:12 PM »
Quote from: Teg2boo on June 22, 2010, 08:59:59 PM
You should have kept the $$ of the fuel pump for a good tune. You're not going to max out a stock pump with 450cc...



Or that faggot sized turbo.
Logged

speedjunky01

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1015
Re: d16 coupe build/project
« Reply #29 on: June 22, 2010, 10:13:30 PM »
Quote from: Teg2boo on June 22, 2010, 08:59:59 PM
You should have kept the $$ of the fuel pump for a good tune. You're not going to max out a stock pump with 450cc...


tune is free courtesy of  O0 hook up

also 1/2 decent save with the tits but we need more

ill therefore 1/2 vouch for this  :mexi: Jew
Logged
Pages: [1] 2   Go Up
« previous next »