:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

ApexSilver06MR/Jason YOU WILL BE MISSED, RIP (link)  :'(

Pages: 1 [2]   Go Down

Author Topic: holset h1c or hy35  (Read 11524 times)

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: holset h1c or hy35
« Reply #30 on: February 08, 2013, 05:06:21 PM »

I belive the smallest h1c IVE seen is 12cm. I know that there is a aftermarket .63 I belive, but they are $$$$$ best bet is to pick up somebodys used splog/log/mini ram or something, and dump your ac to make room.

check my build thread, I think I have pictures of the manifold and turbo mounted with the clearance of the radiator.

http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

If you don't run a backdoor style intercooler you will have plenty of room to move a half core in there and move it over some, but you will probably have to run a pusher fan to make room for the downpipe.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

maleek

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 13
  • RHMT
Re: holset h1c or hy35
« Reply #31 on: February 08, 2013, 05:21:27 PM »

My intercooler isn't a backdoor setup, so i should have a decent amount of space. Its pretty tight in there with the full size and then those giant fan shrouds. Hopefully with a half size ill have more then enough room.
Logged

Speed Phreak

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 59
  • I'm an OG because I say so.
Re: holset h1c or hy35
« Reply #32 on: February 08, 2013, 06:21:53 PM »

HY typically comes with a 9cm2 exhuast housing but the same coldside IIRC...

Depending on chassis, be prepared for clearance issues, housings are pretty large on Holsets.

SSAC Like a boss...




No front rad support and 1/2 width radiator, but different manifold same relative placement though... ED chassis. Front end was pretty much cut to shit to make everything fit on mine. I would've probably done it different in hindsight, since my old swap mounts move the engine forward a bit too much and over the years I was a little to happy with the sawzall.


« Last Edit: February 08, 2013, 06:30:31 PM by Speed Phreak »
Logged
1995 '#039#039Teg - Daily turd burglar
1991 Civic Wagon - N/A lawn dart
1988 CRX HF - Turbo deathtrap

maleek

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 13
  • RHMT
Re: holset h1c or hy35
« Reply #33 on: February 08, 2013, 07:32:47 PM »

It seems that most people who have clearance issues, are running a swap, that moves the motor a bit forward (ef, ej chassis) from my research anyway. Ill probably run into them as well, but hopefully won't need to go sawzall happy lol
Logged

Speed Phreak

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 59
  • I'm an OG because I say so.
Re: holset h1c or hy35
« Reply #34 on: February 08, 2013, 11:51:16 PM »

Yes if you're blessed with a factory b-series chassis(or newer d-series), then you'll probably have less issues...But more weight. Thank your government and auto manufactures for all the crash protection and useless gob. Personally I like knowing I could die on impact in my 1700lb deathtrap, more fun that way.
Logged
1995 '#039#039Teg - Daily turd burglar
1991 Civic Wagon - N/A lawn dart
1988 CRX HF - Turbo deathtrap

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: holset h1c or hy35
« Reply #35 on: February 09, 2013, 01:02:19 AM »

The .63 housings are on ebay all day for less than $200. Honestley i would go with a .70  and have fun. The hy why has a smaller comp then h1 or hx. I stick with the h1c cause they are cheaper then the hx.
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

maleek

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 13
  • RHMT
Re: holset h1c or hy35
« Reply #36 on: February 09, 2013, 01:46:53 AM »

Can the hy comp housing be swapped out for for a 12cm housing?
Logged

Aero

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 622
    • Turbotalk.org
Re: holset h1c or hy35
« Reply #37 on: February 11, 2013, 07:03:32 PM »

Can the hy comp housing be swapped out for for a 12cm housing?

  You mean turbine housing?  No, HX is attached via bolt down clamps, hy with a vband.

maleek

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 13
  • RHMT
Re: holset h1c or hy35
« Reply #38 on: July 10, 2013, 10:09:23 PM »

just picked up an hy35.. pics to follow, looks pretty minty.  Does everybody just use a -3AN line with no restrictor? Also is -10 suitable for a drain line on these things?



Logged

carkrazed

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3422
  • RHMT
Re: holset h1c or hy35
« Reply #39 on: July 10, 2013, 10:45:48 PM »

I ran a -4 feed (no restrictor) and a -10 return.

Never had any issues.
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: holset h1c or hy35
« Reply #40 on: July 11, 2013, 12:10:34 AM »

I ran a -4 with restrictor, and a 3/4" barb for the return. Wich is much larger than a -10an fitting. But I know lots of people running -10 returns with no problem.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

jabberwock

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1135
Re: holset h1c or hy35
« Reply #41 on: July 11, 2013, 01:24:51 AM »

I'm pretty sure holsets are more tolerant of big oil feeds than other turbos.  Diesel stronk, run forever
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: holset h1c or hy35
« Reply #42 on: July 11, 2013, 01:31:46 AM »

But what oil pressure do they normaly see in factory form?
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: holset h1c or hy35
« Reply #43 on: July 11, 2013, 09:56:04 AM »

-3 and a -10 return.

Fyi twin scroll if you can, I made a ton more power and full boost was almost 1000rpm sooner.
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

dvst8r

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3737
  • Unobtainium
Re: holset h1c or hy35
« Reply #44 on: July 12, 2013, 08:52:12 AM »

But what oil pressure do they normaly see in factory form?

80-90psi cold
Logged
There are two kinds of people: Sheep and sharks. Sharks are winners and they don'#039#039t look back '#039#039cause they don'#039#039t have necks. Necks are for sheep.

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: holset h1c or hy35
« Reply #45 on: July 12, 2013, 01:00:11 PM »

But what oil pressure do they normaly see in factory form?

80-90psi cold

Wow, that's impressive. Do u happen to know what it is hot? Just wondering if a restrictor is neede or not. Don't want to over press it with to much but also don't want to stave it of the oil it needs.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

dvst8r

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3737
  • Unobtainium
Re: holset h1c or hy35
« Reply #46 on: July 12, 2013, 07:57:26 PM »

But what oil pressure do they normaly see in factory form?

80-90psi cold

Wow, that's impressive. Do u happen to know what it is hot? Just wondering if a restrictor is neede or not. Don't want to over press it with to much but also don't want to stave it of the oil it needs.

At idle when hot min spec is 15psi iirc and at 2500rpm is 30psi. So on a healthy engine 20-25psi idle hot, and 40-50psi operating rpm.
Logged
There are two kinds of people: Sheep and sharks. Sharks are winners and they don'#039#039t look back '#039#039cause they don'#039#039t have necks. Necks are for sheep.

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: holset h1c or hy35
« Reply #47 on: July 12, 2013, 10:32:06 PM »

But what oil pressure do they normaly see in factory form?

80-90psi cold

Wow, that's impressive. Do u happen to know what it is hot? Just wondering if a restrictor is neede or not. Don't want to over press it with to much but also don't want to stave it of the oil it needs.

At idle when hot min spec is 15psi iirc and at 2500rpm is 30psi. So on a healthy engine 20-25psi idle hot, and 40-50psi operating rpm.

Troof my Cummins idles at about 25psi and operating rpm 55-60psi.
Logged
92GSR - mild interest

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6759
  • I look around and all I see is Smegheads
Re: holset h1c or hy35
« Reply #48 on: July 13, 2013, 12:41:00 AM »

But what oil pressure do they normaly see in factory form?

80-90psi cold

Wow, that's impressive. Do u happen to know what it is hot? Just wondering if a restrictor is neede or not. Don't want to over press it with to much but also don't want to stave it of the oil it needs.

At idle when hot min spec is 15psi iirc and at 2500rpm is 30psi. So on a healthy engine 20-25psi idle hot, and 40-50psi operating rpm.

Troof my Cummins idles at about 25psi and operating rpm 55-60psi.
Same on my He351ve  :noel:
Pages: 1 [2]   Go Up