Topic: Hx-52 on a z6? (Read 4600 times)

crxvtec91 · « **on:** October 25, 2011, 02:45:09 PM »

Thoughts on this, with maybe a small t3 before it? Im thinking log, t3 into Hx52, then use 2 50mm ebay wg to by pass the t3 on the higher boost levels.

92CXyD · « **Reply #1 on:** October 25, 2011, 03:10:35 PM »

Thinking of something similar but with my SC14 supercharger.

ratcityrex · « **Reply #2 on:** October 25, 2011, 04:28:59 PM »

Quote from: carkrazed on October 25, 2011, 03:48:35 PM

You two fuckers always want to OVER complicate things, lol.

MTZ · « **Reply #3 on:** October 25, 2011, 04:55:22 PM »

...................... retarded the 2 wg are going to become a bigger restriction than a t3 and your are going to be held back by the t3 without bypassing it at higher boost so just dont do it

chris · « **Reply #4 on:** October 25, 2011, 05:28:40 PM »

use bigger map sensor

j.h.christ · « **Reply #5 on:** October 25, 2011, 06:50:08 PM »

and a pbt throttle body

Ntrain2k · « **Reply #6 on:** October 25, 2011, 07:26:05 PM »

100 shot will help it spool.

chris · « **Reply #7 on:** October 25, 2011, 10:52:17 PM »

Quote from: j.h.christ on October 25, 2011, 06:50:08 PM

and a pbt throttle body

or new delrin spacer

snm95ls · « **Reply #8 on:** October 25, 2011, 10:55:28 PM »

How big of a shot of giggle gas do you want to use to spool that big fucker?

DasPoop · « **Reply #9 on:** October 25, 2011, 11:08:47 PM »

two fiddy ought to spool it by 6k

Joseph Davis · « **Reply #10 on:** October 26, 2011, 12:36:55 PM »

HX52? Too small.

crxvtec91 · « **Reply #11 on:** October 26, 2011, 07:35:03 PM »

Quote from: chris M on October 25, 2011, 05:28:40 PM

use bigger map sensor

4bar, pbt 74mm tb, 200shot

Quote from: MTZ on October 25, 2011, 04:55:22 PM

...................... retarded the 2 wg are going to become a bigger restriction than a t3 and your are going to be held back by the t3 without bypassing it at higher boost so just dont do it

How can you tell 2 50mm wg would become to much of a restriction?

caged · « **Reply #12 on:** October 27, 2011, 05:50:58 AM »

I really want to have a play with compounding a 4cyl petrol, but from what iv read its not as good as on the diesels.

this is a good read
http://www.yellowbullet.com/forum/showthread.php?t=216811

MTZ · « **Reply #13 on:** October 27, 2011, 09:36:38 AM »

Quote from: crxvtec91 on October 26, 2011, 07:35:03 PM

Quote from: chris M on October 25, 2011, 05:28:40 PM
use bigger map sensor

4bar, pbt 74mm tb, 200shot

Quote from: MTZ on October 25, 2011, 04:55:22 PM
...................... retarded the 2 wg are going to become a bigger restriction than a t3 and your are going to be held back by the t3 without bypassing it at higher boost so just dont do it

How can you tell 2 50mm wg would become to much of a restriction?

i cant, but i wouldn't try it based on the fact i cant prove they would be a restriction... its just not an ideal setup but hey thats why i love this forum so props to you for coming up with the idea and maybe trying it, hopefully you'll prove me wrong (btw when i first read it i thought of two 38mm wg but even at 50 the flow characteristic and valve might hurt your flow maybe if you used a throttle body type valve

crxvtec91 · « **Reply #14 on:** October 27, 2011, 11:03:14 AM »

http://www.ebay.com/itm/60MM-Turbo-SS-Wastegate-Adjustable-8-11-PSI-SILVER-/380379340595?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item5890601f33

twin 60mm should not become a restriction at all!

92CXyD · « **Reply #15 on:** October 27, 2011, 11:43:02 AM »

Quote from: crxvtec91 on October 27, 2011, 11:03:14 AM

http://www.ebay.com/itm/60MM-Turbo-SS-Wastegate-Adjustable-8-11-PSI-SILVER-/380379340595?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item5890601f33

twin 60mm should not become a restriction at all!

Nice find, thanks.

ratcityrex · « **Reply #16 on:** October 27, 2011, 12:33:04 PM »

think im gona use the 60mm wg on a cut out and use that instead of some electric motor cutout bull shit.

92CXyD · « **Reply #17 on:** October 27, 2011, 01:06:04 PM »

Quote from: ratcityrex on October 27, 2011, 12:33:04 PM

think im gona use the 60mm wg on a cut out and use that instead of some electric motor cutout bull shit.

I like that though

crxvtec91 · « **Reply #18 on:** October 27, 2011, 02:44:47 PM »

Quote from: 92CXyD on October 27, 2011, 01:06:04 PM

Quote from: ratcityrex on October 27, 2011, 12:33:04 PM
think im gona use the 60mm wg on a cut out and use that instead of some electric motor cutout bull shit.

I like that though

60mm is 2.36"

92CXyD · « **Reply #19 on:** October 27, 2011, 03:33:01 PM »

Quote from: crxvtec91 on October 27, 2011, 02:44:47 PM

Quote from: 92CXyD on October 27, 2011, 01:06:04 PM
Quote from: ratcityrex on October 27, 2011, 12:33:04 PM
think im gona use the 60mm wg on a cut out and use that instead of some electric motor cutout bull shit.

I like that though

60mm is 2.36"

Yeah but if I am using them to relieve back pressure in the exhaust then kool.

ratcityrex · « **Reply #20 on:** October 27, 2011, 03:57:29 PM »

that way I can keep my Tanibeeeeee muffler and still be able to make some power. Its 3" going into it and 4" coming out, but only 2.25" inside

ApexSilver06MR · « **Reply #21 on:** October 30, 2011, 01:42:03 AM »

you nogs need this
http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-ACS-010&Category_Code=BCS

crxvtec91 · « **Reply #22 on:** October 30, 2011, 02:52:13 PM »

Quote from: ApexSilver06MR on October 30, 2011, 01:42:03 AM

you nogs need this
http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-ACS-010&Category_Code=BCS

Price: $285.00

Fuck theat nog, my first turbo kit was half that price!

Ntrain2k · « **Reply #23 on:** October 30, 2011, 02:57:21 PM »

Mount a wastegate actuator on a throttle body.

The RHMT boost activated exhaust dump.

News:

Author Topic: Hx-52 on a z6? (Read 4600 times)

chris

chris