Topic: jared's datsun 280z build thread. (Read 9234 times)

jarebear667 · « **on:** November 01, 2011, 03:50:11 PM »

okay assholes i have been gone for a while, not that you give a fuck,but i sold a lot of shit, bought a house, been working on that.
put new floors in and bought all new furniture, and been getting my garage ready for the cold iowa winters!

so far i put up the walls and insulation, has 10 foot ceilings to its been fun putting a ceiling in, btw my garage is almost 1000 square feet

and i bought a 75,000 btu natural gas heater and keeping that bitch at 60 in the winter.
anyways
sold the turbo s2000 for a DP on the house
got it fore 74,000 and ow 66,300 on it. super low interest rate only kicker is that its in a small town. but oh well.

and bought this datsun for 650 bucks!

have an lt1 with 4l60 im putting in it!

snm95ls · « **Reply #1 on:** November 01, 2011, 03:59:50 PM »

Bitchin! Do work.

crxvtec91 · « **Reply #2 on:** November 01, 2011, 07:34:17 PM »

Quote from: snm95ls on November 01, 2011, 03:59:50 PM

Bitchin! Do work.

92CXyD · « **Reply #3 on:** November 01, 2011, 07:45:20 PM »

I would like to express my hatred to you, for find a nice Z-car with low rust.

I have been locking for a long fucking time and no luck and no cash.

But I'll have to keep checking this thread for your build update, be envious and still hate ya at the same.

jarebear667 · « **Reply #4 on:** November 01, 2011, 10:13:25 PM »

Beware I will show you the rust haha I have quarter patches for it I need a fender and hatch I will be roll panning the back and 240z front with lower spoiler I have the chrome bumper and lights coming and truck bumpers off haha rear is new I'm box also has brand new tires so I'm selling all that and motor and getting my 650 back no problem. Bought an 2002 altima a month back for 700 put a motor in it and fixed/painted fender bumper and sold to Hispanic for 4500 cash. Profits all went to garage as you van see

Joseph Davis · « **Reply #5 on:** November 01, 2011, 10:18:19 PM »

I would like to express me hatred of you for everything except the Z-car.

jarebear667 · « **Reply #6 on:** November 02, 2011, 01:36:07 PM »

well it was on craigslist in minneapolis, called the guy (around 55 with some cool cars allready restored and lived in a nice house.)he wanted 3000, i said how much without rims(some 17's) he says 2500 i have him send me underside pics i see some shit i didnt like but i can fix for cheap. i ask him how low will he go. he says 2000, i go look at it with a trailer and intents on buying it, i look it over it doesnt run well, something simple but has a lot of new parts and rebuilt engine. so i tell him i dont want to lowball him knowing that he has a lot into it at this point, he wants me to throw a number, and i said i dont want to be an ass. so i leave and i tell him i will call him my phone fucks up i lose his humber he calls me in the afternoon and asks me what i will pay for it i said 500, he says i can get about 650 if i donate it out of taxes or some shit so we settle i go back up a month later and get it. thats how you get a datsun for 650 bucks... haha
well i wish i had an update but i dont i will soon i hope garage ceiling is almost in!

Joseph Davis · « **Reply #7 on:** November 02, 2011, 02:22:10 PM »

He probably got the feeling you were a good home for it.

Lowerit · « **Reply #8 on:** November 02, 2011, 04:01:38 PM »

How do you like the Mr.Heater 75K? I am looking @ the 45k or 75k for my measley 500 sq ft garage

PS - love the Z car

HiProfile · « **Reply #9 on:** November 02, 2011, 05:19:15 PM »

If it's insulated any bit and it's a heat exchanger type vs open flame, 45k will be fine.

jarebear667 · « **Reply #10 on:** November 03, 2011, 08:41:57 AM »

Its a bm 75000 got it at menards for 500 and its a heat exchanger.the 45k is 450 plus exhaust and thermastat

crxvtec91 · « **Reply #11 on:** November 03, 2011, 11:11:13 AM »

I hate you, contiune on! BTW if im ever by your way im stop by and drive it

jarebear667 · « **Reply #12 on:** November 04, 2011, 01:51:50 PM »

should have the motor/trans harness and all that stuff this weekend at my house. if all goes well. we will see.
i need to sell the big turbo so i can buy up my lower dam and flares and then wheels and metal and work haha.. fuck its going to be a fun winter!

Eggylshatch · « **Reply #13 on:** November 24, 2011, 11:19:34 AM »

this car gives me an angry jealousy boner.

jarebear667 · « **Reply #14 on:** November 29, 2011, 02:50:46 PM »

FOUND THIS IN IT!! from 1976 copy right

so im undecided on the engine and shit the guy hasnt gotten it out of storage and its going to snow so i might not get it until spring, but i dont care i might run with the one thats in it for fun! and DD the car as the rails are in tough shape! but i just want to drive it haha.
last week i bought 4 piston brakes from 4x4 toyota truck and 300zx vented rotors and now im on the hunt for a spacer to space the rotor 9 mm.
and bought some 235/45/17 nitto nt555 and 255/40/17 nt555's for the girl and some rota rb's i work at a shop and keep track of inventory on the tires goodyear firestone and all those brands in between, and got a good deal on rubber and the rims too

bought flare too haha idk if i love them but i like the looks of them all together.

rims are 17x8.5 all four corners +4 offset got them for 650 shipped new from 18-racing.com

front rim and new brakes only 10.8 inch but too caliper and now a vented setup.
saving up for wilwood 1" master. or a 15/16s idk where i want to go with that yet.

i will get rollin on the body work sometime here trying to figet out how ghetto i want to be..

NoPistons! · « **Reply #15 on:** December 01, 2011, 04:10:55 PM »

Oh secksay!

Boost that L and i'm sure you'll be very happy with it BUT my inner hustler says you can flip that and the tranny for a good bit. ESPECIALLY if it's been rebuilt with paperwork....but you already know that.

jarebear667 · « **Reply #16 on:** December 01, 2011, 07:24:13 PM »

I'm going to rock it asisfor now but I'm going to start body work soon.

jarebear667 · « **Reply #17 on:** June 01, 2012, 09:04:05 AM »

well i havnt worked on this at all since i bought a house and have been doing a couple of builders to get some extra cash and with work and all that shit, so the other night i started cutting out the rust and found way to much so im going to be parting it out to get some of my money back and i bought a 68 international scout haha idk why i use to have one and wanted one again. and the body is cleaner than the rusty as datsun..

so if you know of anyone wanting parts let me know

crxvtec91 · « **Reply #18 on:** June 01, 2012, 03:15:39 PM »

Where are you located?

NoPistons! · « **Reply #19 on:** June 02, 2012, 06:37:17 AM »

If i had the money, i'd totally rape that l28 and gearbox off your hands.

haters gonna hate but this gives me jizzerzzzzzzzzxxxxx.

+

So dope. Maybe one day...... Sucks to here you're parting out it. I dont want to push tube chassis on you but damn dude, you can save her! Aint nothing but time.

jarebear667 · « **Reply #20 on:** June 07, 2012, 12:01:03 AM »

I'm in north Iowa.
I have 240z front bump
New 280z rear bump
Stock 280z front good chrome.
ZCAR flares
Rotas
Big brake kit
Quarter patches
Uncracked dash
And the rest of the car
Money will be going to wedding and my 68 scout that has a nice body.

I just got done painting a 4x4 Chevy luv tonight 1980 model I factory baby blue.

News:

Author Topic: jared's datsun 280z build thread. (Read 9234 times)