:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

ApexSilver06MR/Jason YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: DIY Flow Bench Controller  (Read 13328 times)

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
DIY Flow Bench Controller
« on: March 01, 2012, 01:59:05 PM »
Sewell con'd me into building an injector controller for him, and it's in final testing phase. Mine is 75% finished, but will be exactly the same.

*There are 2 dozen "modes" to test and clean injectors. The picture shows it apart with the test wires hooked up.

*Automatic or manual fuel pump power via internal 30 amp relay. The LED on the power block simulates the fuel pump for this picture.

*8-14v input for the fuel pump & micro-controller.

*8-18v input to power the fuel injectors.

*Adjustable deadtime value

The numbers on the left are for the current mode, the numbers on the right are for injector deadtime (0.00ms, 0.15-2.70ms in 0.05ms increments). Deadtime is coded in microseconds, but displayed in milliseconds. The dials are for mode & deadtime selection. Currently it's protected/fused for 5 amps worth of injectors - 4 saturated or 4 p&h using a resistor box. The MOSFET controlling the injectors can go up to 30 amps (with a heatsink).


Awaiting input:


Running MODE 80, DEADTIME set at 1.70ms


What it will be working with...



FYI I do NOT intend to build another unless the price is right. I've put a good 30 hours into this (hardware & coding), probably more.
« Last Edit: March 09, 2012, 08:11:30 PM by HiProfile »
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6866
  • I look around and all I see is Smegheads
Re: DIY Fuel Injector Controller (for flow bench)
« Reply #1 on: March 01, 2012, 02:06:46 PM »
Kool, will there be some 1000cc+ inj. available soon?  :noel:
Logged

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: DIY Fuel Injector Controller (for flow bench)
« Reply #2 on: March 01, 2012, 02:27:47 PM »
The survey says YES.

The question is how much do I want to put down for "inventory".
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

sewell94

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2194
  • Border Jumper
Re: DIY Fuel Injector Controller (for flow bench)
« Reply #3 on: March 01, 2012, 02:59:23 PM »
I did con you into building one, your the one that went way over the top  O0 :noel:


I'll have big bosch injectors available soon,
Logged
My real power is not interweb-based, although it does allow me to come across in the interwebs as a magical being shooting pixie dust and cupcakes out my asshole and such.

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: DIY Fuel Injector Controller (for flow bench)
« Reply #4 on: March 01, 2012, 03:08:05 PM »
ready and waiting
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: DIY Fuel Injector Controller (for flow bench)
« Reply #5 on: March 01, 2012, 03:08:33 PM »
Quote from: sewell94 on March 01, 2012, 02:59:23 PM
your the one that went way over the top  O0 :noel:

I was thinking that after I saw Moates' Engine Sim. You'd think for $200 they'd at least put it in a box!

Good to hear the "overseas connection" works.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

t_cel_t

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3147
Re: DIY Fuel Injector Controller (for flow bench)
« Reply #6 on: March 01, 2012, 03:41:12 PM »
30 hours?

all you need is a 555, 2 pots, computer power supply, and some power mosfets. O0

how do you run yours?
Logged
malone labe

I think all cop cars need to have turbo. nbspnbsp Then they would understand the necessity of putting your foot down and how uncontrollable the urge is to fucking rail on that shit.

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: DIY Fuel Injector Controller (for flow bench)
« Reply #7 on: March 01, 2012, 04:57:52 PM »
I tried a 555 already. Very difficult to get a precise pulse, meaning constant 2ms pulse etc. It also can't do different pulse widths/rpms, unless you're okay with not knowing exactly what the numbers are. Then there's adding in dead time values for different injectors...

Mine uses a PIC programmed to provide exact pulse widths. It should be precise enough where temp of fluid/air & baro pressure will account for more error than the chip's timing.


Here's a sample of what the "in-rail cleaning" mode does:

Turn fuel pump on
wait 3000ms
loop # of seconds shown on deadtime display:
Turn injectors on 5ms
Turn injectors off 5ms
Turn injectors on 10ms
Turn injectors off 10ms
Turn injectors on 15ms
Turn injectors off 10ms
Turn injectors on 25ms
Turn injectors off 20ms
end loop
wait 1000ms
Turn off fuel pump

Try that with a 555 timer.
« Last Edit: March 01, 2012, 05:09:35 PM by HiProfile »
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

DasPoop

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1761
Re: DIY Fuel Injector Controller (for flow bench)
« Reply #8 on: March 01, 2012, 08:46:27 PM »
Damn dude i am going to have to check this out.
Logged
Na mike:"quotquotthe one i had was a real bbw, not just a fat chick, but a huge fat chick"quotquot

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: DIY Flow Bench Controller
« Reply #9 on: April 11, 2012, 09:09:24 PM »
Expect some really "big" things soon. Sewell should have his controller soon, and mine is just waiting for me to put holes in the cover. :evil:
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

sewell94

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2194
  • Border Jumper
Re: DIY Flow Bench Controller
« Reply #10 on: April 11, 2012, 09:30:12 PM »
I got it today,  hopefully i'll get to test it out next week.
Logged
My real power is not interweb-based, although it does allow me to come across in the interwebs as a magical being shooting pixie dust and cupcakes out my asshole and such.

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: DIY Flow Bench Controller
« Reply #11 on: April 11, 2012, 09:46:18 PM »
I'm guessing you'll need g-cylinders larger than 100ml? ;)
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid
Pages: [1]   Go Up
« previous next »