:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

BDVT's BroDozzer gets compound twin turbos!... (link)

Pages: 1 2 [3]   Go Down

Author Topic: Hi. Dyno sheets and vid on page 2!!  (Read 29070 times)

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6841
  • I look around and all I see is Smegheads
Re: Hi. Dyno sheets and vid on page 2!!
« Reply #60 on: July 02, 2012, 12:28:46 AM »
Quote from: gfrg88 on July 01, 2012, 07:07:20 PM
Quote from: accordepicenter on May 06, 2012, 04:01:04 PM
im on a single walbro 255lph intank on 880s, seems to do good.    Im running bpr7es plugs, so 2 steps colder from stock.  Do you know what the specs are on both cams?  I run a gude 252 duration intake/exhaust and .434 lift...

Can't forget I'm e85, and might go to e98 for consistency.


Quote from: chris M on May 10, 2012, 05:20:38 AM
bisis gets all his springs from isky if you want to save 50 bucks on them

So does bisi do anything in house???

Dyno and he says in a vid he has his headers made inhouse.  :?:
Logged

gfrg88

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 32
  • 2.0Si-T
    • Classic Prelude
Re: Hi. Dyno sheets and vid on page 2!!
« Reply #61 on: July 07, 2012, 07:55:23 PM »
Ah I see! That explains why they crack!
Logged
86 lude on steriods.

gfrg88

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 32
  • 2.0Si-T
    • Classic Prelude
Re: Hi. Dyno sheets and vid on page 2!!
« Reply #62 on: October 25, 2012, 06:07:26 PM »
Couple of pics to keep the thread alive...






Redid the return bung on pan..




Welded inside and out. Shitty welds by a buddy of mine  :noel:



Got this yesterday.


Don't have pics of the disk since it's in storage but it's this exact one


Large blue!!!!!  O0


And a new shiny valve seat for the wastegate


More pics coming in next couple of weeks.. Money is tight, so I'm slowly buying the parts needed, but it's coming along   :noel:
Logged
86 lude on steriods.

gfrg88

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 32
  • 2.0Si-T
    • Classic Prelude
Re: Hi. Dyno sheets and vid on page 2!!
« Reply #63 on: January 27, 2013, 09:44:21 PM »
Shit's almost done, fuckers!!!!  :mexi:










I found some specs on my turbo finally-
17cm2
Compressor inducer 65mm, exducer 74 mm, 44 trim
Turbine inducer 50 mm, exducer 75 mm, 77 trim

So it's not too big, I also found two of the exhaust studs on the old head were stripped, and I was missing one nut. That's what was causing so much lag, and boost not coming in so hard. My turbo wasn't spooling fully. Go figure, still made almost 250whp :noel:
Logged
86 lude on steriods.

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: Hi. Dyno sheets and vid on page 2!!
« Reply #64 on: January 28, 2013, 10:34:06 AM »
About damn time, DO WORK!
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.
Pages: 1 2 [3]   Go Up
« previous next »