Topic: ~~~~~~~~~~~Blown turbo seals 9/15/10 Ratcityrex's B18a1 Build 296hp/289tq NO56k (Read 200682 times)

Lowerit · « **Reply #390 on:** February 05, 2010, 03:43:41 AM »

this is what dreams are made of.

92CXyD · « **Reply #391 on:** February 05, 2010, 09:50:53 AM »

I see problem with welds.

Great looking exhaust there and it is cheap and I like cheap. ;D :yes: Jew

ratcityrex · « **Reply #392 on:** February 05, 2010, 10:08:45 AM »

Quote from: 92CXyD on February 05, 2010, 09:50:53 AM

I see problem with welds.

Whats wrong with them?

88dx · « **Reply #393 on:** February 05, 2010, 10:25:04 AM »

Quote from: ratcityrex on February 05, 2010, 10:08:45 AM

Quote from: 92CXyD on February 05, 2010, 09:50:53 AM
I see problem with welds.

Whats wrong with them?

No flux birdshit

ratcityrex · « **Reply #394 on:** February 05, 2010, 11:15:05 AM »

Quote from: 88dx on February 05, 2010, 10:25:04 AM

Quote from: ratcityrex on February 05, 2010, 10:08:45 AM
Quote from: 92CXyD on February 05, 2010, 09:50:53 AM
I see problem with welds.

Whats wrong with them?
No flux birdshit

did you not see that I welded the alel back? Here you go, here is your bird shit slug trails

92CXyD · « **Reply #395 on:** February 05, 2010, 11:34:18 AM »

Quote from: 92CXyD on February 05, 2010, 09:50:53 AM

I see problem with welds.

Great looking exhaust there and it is cheap and I like cheap. ;D :yes: Jew

Dude my engrish sux.

I meant I do not see problems with the welds. ;D

d112crzy · « **Reply #396 on:** February 05, 2010, 12:59:10 PM »

That shits way too clean for flux. Fail.

:p

Urban Indian · « **Reply #397 on:** February 05, 2010, 04:15:18 PM »

Quote from: ratcityrex on February 05, 2010, 12:02:46 AM

I dont know how loud it will be with just the resonator, but I have a feeling that sometime this summer I will be picking up a magnaflow and having new exhaust welded up from the axel flange back because I dont realy like how it turned out. Might end up stuffing another resonator instead of the magnaflow behind the axel.

My car has just the one muffler. I had some Dynamax Bullits but they were not SS and Dave wouldnt weld them on it......... But all in all I like the way it sounds.

I like your exhaust, not a big fan on the way it turns down. Reminds me of that fat speed factory Kid and his crazy uber JDM pump gas car

Keep it up nigger

ratcityrex · « **Reply #398 on:** February 05, 2010, 05:14:38 PM »

Quote from: Urban Indian on February 05, 2010, 04:15:18 PM

Quote from: ratcityrex on February 05, 2010, 12:02:46 AM

and having new exhaust welded up from the axle flange back because I dont realy like how it turned out.
I like your exhaust, not a big fan on the way it turns down.

Im not a huge fan of the way it turned out ether. From the axle back that is. Must be because I was just using left over parts and pieces to make it. I think the side exit through the rear bumper is where its gona be done. I hate how the crx's have the muffler that runs all the way across the back and then exits on the other side of the car. And Im not gona do some stupid ass staight pipe from the rear axle over to the other side of the car at a 45* angle. It looks like brown rice every time I see that done!! CHING CHONG MEOW!!

Urban Indian · « **Reply #399 on:** February 05, 2010, 07:12:57 PM »

I seen that.

I agree regaurdless

glustic · « **Reply #400 on:** February 06, 2010, 03:53:02 PM »

He did alot better job than that shop could ever do. Fuck there $200

bullshit

ratcityrex · « **Reply #401 on:** February 09, 2010, 01:22:32 AM »

Well today was a good day. Got most of the last few things done. Got my exhaust from ryan on sat. Looks bitchen by the way. Then today I re-did the wg dump tube because the one I had was hitting the downpipe, and it had been cut and reused about 4 times so the pipe had all kinds of cuts and welds.....lol

So here is the new one, Im gona just call this one the snake..............

But it fits good.

I cut about 3/16" off of each downpipe bolt so it wouldent bottom out in the turbo. I fitted up my feed line to see how I was gona run my feed.

So tomorrow im gona bolt up my turbo and my exhaust and run my hot side chargepipe, disconect the line to my pcv valve coming from my black box and cap it, then run a t from my intake run a vac line to my bov and my wg. Then I need to burn a new chip and set my boost cut at 1.5lbs untill I get my catch can and my baffles set up for my valve cove.

glustic · « **Reply #402 on:** February 09, 2010, 01:50:23 AM »

Sick ass shit!!!!

bigdaddyvtec · « **Reply #403 on:** February 09, 2010, 01:54:49 AM »

I sense the Nog is strong with this one

malichite · « **Reply #404 on:** February 09, 2010, 11:08:43 AM »

I love your snake, errrr. nice pipe, fuck no way to say it without sounding gay. Looks Hot!!!!

ratcityrex · « **Reply #405 on:** February 09, 2010, 11:32:44 AM »

YOU fag!!!

:yes: Stay away from it. The last thing I want to do is catch you messing with my snake!!

glustic · « **Reply #406 on:** February 09, 2010, 05:03:36 PM »

Quote from: ratcityrex on February 09, 2010, 11:32:44 AM

YOU fag!!! :yes: Stay away from it. The last thing I want to do is catch you messing with my snake!!

You would like it AJ don't deny it

ratcityrex · « **Reply #407 on:** February 10, 2010, 12:54:51 AM »

It runs!!!!! Well kind of. Boost control is with my right foot due to the wg not having a line ran to it, and the bov dosent work eather, because it to dosent have a line ran to it. And air filters??? Who needs them, Not me because mine dosent fit....lol So the plan for tomorrow is to get some RIGHT sized t's and run vac lines to my wg, and bov. The Im gona get some window screen to put over my inlet for the time being, Untill I can get the right silcone bend to make my air filter work. And boy the exhaust is real thumpy with the deltas and 3" with no muffler!

jdmhatchracer94 · « **Reply #408 on:** February 10, 2010, 01:20:20 AM »

why wait homedepot open till 11pm get that shit done

fishinfool88 · « **Reply #409 on:** February 10, 2010, 01:24:16 AM »

I see what you did there, and I like it.

ratcityrex · « **Reply #410 on:** February 10, 2010, 01:46:58 AM »

Quote from: jdmhatchracer94 on February 10, 2010, 01:20:20 AM

why wait homedepot open till 11pm get that shit done

Only open untill 10 up here, and fuck that Im spent after busting ass all afternoon in the garage. I had an elivated heart beat all afternoon in the garage. I was running from one side to the other just trying to bust this out today and not skimp/cut corners(and im fucking fat). Got it most of the way done, enugh to drive to work tomorrow anyways.

Quote from: fishinfool88 on February 10, 2010, 01:24:16 AM

I see what you did there, and I like it.

and whats that?

ApexSilver06MR · « **Reply #411 on:** February 10, 2010, 02:01:09 AM »

im still waiting 4 a call back

ratcityrex · « **Reply #412 on:** February 10, 2010, 02:05:49 AM »

I called and you let me go to voicemail

Ill call you tomorrow nig!

chris · « **Reply #413 on:** February 10, 2010, 02:09:04 AM »

Hell yeah ;D.

malichite · « **Reply #414 on:** February 10, 2010, 02:51:35 PM »

Lets go get some rippers!!!!

Teg2boo · « **Reply #415 on:** February 10, 2010, 03:20:42 PM »

Quote from: malichite on February 10, 2010, 02:51:35 PM

Lets go get some rippers!!!!

this!

Joseph Davis · « **Reply #416 on:** February 10, 2010, 05:00:10 PM »

Quote from: ratcityrex on February 10, 2010, 12:54:51 AM

Boost control is with my right foot due to the wg not having a line ran to it

AWARD THIS MAN ONE INTERNET

crxvtec91 · « **Reply #417 on:** February 10, 2010, 05:22:03 PM »

Love the full size rad!

ratcityrex · « **Reply #418 on:** February 10, 2010, 05:58:47 PM »

Quote from: Teg2boo on February 10, 2010, 03:20:42 PM

Quote from: malichite on February 10, 2010, 02:51:35 PM
Lets go get some rippers!!!!

this!

One the roads dry up and Ive gotten all the little shit done I will!

Teg2boo · « **Reply #419 on:** February 10, 2010, 06:05:23 PM »

Quote from: ratcityrex on February 10, 2010, 05:58:47 PM

Quote from: Teg2boo on February 10, 2010, 03:20:42 PM
Quote from: malichite on February 10, 2010, 02:51:35 PM
Lets go get some rippers!!!!

this!
One the roads dry up and Ive gotten all the little shit done I will!

Yeah, be careful on wet road cause b18+10psi and dirty 4th = spinning tire at 120km/h

Winter tires don't help too

News:

Author Topic: ~~~~~~~~~~~Blown turbo seals 9/15/10 Ratcityrex's B18a1 Build 296hp/289tq NO56k (Read 200682 times)

chris