:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

RHMT DIY Hub Dyno?!?!? check it. (link)

Pages: [1] 2   Go Down

Author Topic: Flat_blacks boosted non-intercooled bastard child B20A5  (Read 21175 times)

flat_black

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 315

I started my turbocharging days with this motor, after it continued to blow head gaskets and piss me off i ditched it for an H22..

Well years later i decided to try it again, except this time cheaper, not pushing it as hard and leaving the motor fairly stock.

I found a pretty clean chassis with a blown up, already in pieces B21A1 for 650 bucks towed it home and started tearing it apart.



got the motor out and cleaned up the bay a bit



Bought a different block, the b21 is FRM. B20a5 is normal iron, bought the b20a5 short block in pieces for 100 bucks threw down a sick hone job and bought an Ebay evergreen rebuild kit.



H23 rods are a direct swap for these engines, and there much stronger looking then stock, scored a set for free



instead of cleaning the stock pistons and risk breaking them upon removal i bought a set of B series cast nippon turbo pistons, for the price why not.. had the wrist pin bores honed to fit. Combined with the b21a1 head we now have a really low compression  b20a5 ( about 7.9) spent more than i wanted on that but got the rods, turbo, and injectors for free so i spent money else where.



decided to do a quick cleanup job on the head, lapped all the valves replaced stem seals, and cleaned up the valve bowls, got the head resurfaced for free, Thanks Kyle!

 


motor going together


Being this is a bastard child of a motor there is no cheap cast iron china turbo manifolds out there, so i bought one for an H22a and made it work... drilled/hogged out a few holes, nigger rigged the gasket and WALA




Got an old Garrett T3 turbo off a mustang/tbird for free, had tons of shaft play but in otherwise decent shape, got a rebuild kit for it off ebay, took it to work and sandblasted it all up.. 75 bucks into the turbo

modified the compressor outlet for a normal coupler, and built a gay little flange for the air filter





Pretty much no way to fit internal wastegate with the H22a manifold which sucks so i niggered a external setup with a really chinese wastegate and recirced it back into the downpipe, thanks Columbia River Mandrel Bending for the quick shipping and awesome prices/RHMT discount!






intercoolers are a pain in the ass and somewhat of a nigger to install on these old preludes, so i stole a meth kit for 150 bucks and used the ECU to control it..





Got the BOV for free thanks NOL!
Got a steal on S300 ,already installed in a P75 Vtec and boost control ready! i know Hondata is hated around here but for 350 bucks..

Finished product, daily driving it on 10psi


All in all i have about 2400 bucks into the entire setup including the cost of the car and a new Comp Clutch





 

« Last Edit: May 26, 2013, 07:27:09 PM by flat_black »
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: Fat_blacks boosted non-intercooled bastard child B20A5
« Reply #1 on: May 12, 2013, 10:12:19 PM »

I always thought you were a fucking weird-o for liking those chassis, then I got to drive a 300whp one that was stockish suspension, and hooked power like a Civic only wished it could.  I want one.

You're still a weird-o.

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #2 on: May 12, 2013, 10:38:56 PM »

Its still a girl's car.............



Rhmt old scool setup looks good. Car looks pretty clean. I like it!
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #3 on: May 13, 2013, 12:31:55 AM »

 :Jew:  approved. and has a place on the RHMT dyno  O0
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6759
  • I look around and all I see is Smegheads
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #4 on: May 13, 2013, 01:45:19 AM »

This should also be added with list build threads.

How close do you think on betting the A20 Accord that was there the last two years?  :noel:

boosted 00 black si

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1560
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #5 on: May 13, 2013, 09:01:09 AM »

I like 8)
Logged
go fuck your self

BORN TO BOOST
LITTLE B16.400whp on 16psi

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #6 on: May 13, 2013, 04:30:42 PM »

Always wanted to do this
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #7 on: May 13, 2013, 08:10:54 PM »

Old school pimp
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

flat_black

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 315
Re: Fat_blacks boosted non-intercooled bastard child B20A5
« Reply #8 on: May 13, 2013, 08:14:01 PM »

Its still a girl's car.............

Rhmt old scool setup looks good. Car looks pretty clean. I like it!

Its a girls car, but what Honda isn't?

:Jew:  approved. and has a place on the RHMT dyno  O0

i haven't decided what car to bring

I always thought you were a fucking weird-o for liking those chassis, then I got to drive a 300whp one that was stockish suspension, and hooked power like a Civic only wished it could.  I want one.

You're still a weird-o.

i like having a car that not many people modify, and there just as capable as any other honda in most cases.
Logged

JACER63

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 167916
  • well shit..
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #9 on: May 13, 2013, 09:01:42 PM »

nice work mitch.. my sister had the same car new back in the day. top notch work non the less.

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #10 on: May 13, 2013, 10:07:04 PM »

bring 2? im planning on bringing 2 cars to the meet.



ps. not sure if anyone even remembers back that far... but i use to have a white 90 Prelude Si, like Mitch's other car. i liked it. was slow tho.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

flat_black

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 315
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #11 on: May 13, 2013, 10:48:21 PM »

yeah i thought about bringing 2 cars, but its to much to worry about and to much gas.. i really wanna see what the 240 does on a dynojet, and i really wanna see what this new abortion makes as well, id guess 220whp or so.
Logged

quadnie

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3411
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #12 on: May 13, 2013, 11:14:51 PM »

Impressive hybrid work there on a car that you don't see on the road that much anymore.  I just had one in my garage last week for ball joint swap - was really impressed with the turn radius and handling it had (after I installed the new ball joints) - of course no power with the stock SOHC power plant.  Factory camber adjustment was a nice feature added to it as well if you wanted to keep the ride height stock with more adjustability.

What pistons did you use for the setup; some run of the mill nippon LS pistons?
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #13 on: May 14, 2013, 12:37:49 AM »

QUADDIE

arsenio

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 27
  • I have the word "CockHound" tattooed on my neck
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #14 on: May 14, 2013, 07:22:12 PM »

Thumbs up. One of the only Honda bodies I like.
Logged
I am currently banned for being a piece of shit.
Will you miss me?

bigdaddyvtec

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8948
  • Go outside and play hide and go fuckyourself
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #15 on: May 15, 2013, 06:17:36 PM »

I have some video of this pile of shit on my phone. Ill upload to youfuck now.


Russ:  home boy will be there with the accord this year. Hoping the iron block 2wd blazer with built motor and single 72mm egay turbo setup wil be too'
Logged
http://i256.photobucket.com/albums/hh166/joeymisanthropy/Misce/TURBOTHIS.jpg

H series 35 pounds... Will turn you out!
 ---GFI we build FAST---

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6759
  • I look around and all I see is Smegheads
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #16 on: May 15, 2013, 08:18:06 PM »

I have some video of this pile of shit on my phone. Ill upload to youfuck now.


Russ:  home boy will be there with the accord this year. Hoping the iron block 2wd blazer with built motor and single 72mm egay turbo setup wil be too'

Too bad I will not be there, hoping you guys put up a lot of vids this year.  :noel:

bigdaddyvtec

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8948
  • Go outside and play hide and go fuckyourself
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #17 on: May 15, 2013, 08:22:59 PM »

Logged
http://i256.photobucket.com/albums/hh166/joeymisanthropy/Misce/TURBOTHIS.jpg

H series 35 pounds... Will turn you out!
 ---GFI we build FAST---

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5882
  • Teh Secksy.....I has it
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #18 on: May 15, 2013, 10:04:22 PM »

I like it. I had one of those like 10 years ago. It was super clean and 100% stock. I loved it for a DD
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #19 on: May 15, 2013, 10:56:47 PM »

"This thing barely spins the tires in the rain"

Is this a Seattle thing?

Minor Threat

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2401
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #20 on: May 16, 2013, 12:03:28 AM »

With that much ballast in the car, it'll probably never spin.
Logged
"quotquotand the welds look like a pigeon had 1 too many chili-dogs, whoever built them needs to go throw their tools in the ocean."quotquot

www.facebook.com/enhancedautoperformance

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #21 on: May 16, 2013, 09:42:11 AM »

With that much ballast in the car, it'll probably never spin.

The ballast is good for traction :noel:
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

bigdaddyvtec

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8948
  • Go outside and play hide and go fuckyourself
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #22 on: May 16, 2013, 11:43:01 AM »

"This thing barely spins the tires in the rain"

Is this a Seattle thing?
No ITs a FUCK YOU thing  MWah  ;O)
Logged
http://i256.photobucket.com/albums/hh166/joeymisanthropy/Misce/TURBOTHIS.jpg

H series 35 pounds... Will turn you out!
 ---GFI we build FAST---

flat_black

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 315
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #23 on: May 16, 2013, 08:30:44 PM »

she was only on 6psi in that video running pig rich.. however its still slow halfway tuned on 10.. lol
Logged

flat_black

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 315
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #24 on: May 26, 2013, 07:21:59 PM »

Built a catch can for this turd... tired of smelling the crankcase on the way to work

Also found a map sensor laying around so it reads beyond 9.5 psi  O0






Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #25 on: May 26, 2013, 11:42:07 PM »

Looks good nig. So what's the plan for next weekend? U bringing this pig or your nissan?
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

flat_black

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 315
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #26 on: May 27, 2013, 01:46:04 AM »

i'd like to see what this car makes, and see if it wants anymore timing.. so i'm leaning towards the red prelude... but who knows
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #27 on: June 03, 2013, 11:07:09 AM »

Never understood the fascination with food and beverage hose.

bigdaddyvtec

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8948
  • Go outside and play hide and go fuckyourself
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #28 on: June 03, 2013, 12:53:32 PM »

HEs cheap, and black... Probably stole it from a Popeyes chicken joint straight out the fountain
Logged
http://i256.photobucket.com/albums/hh166/joeymisanthropy/Misce/TURBOTHIS.jpg

H series 35 pounds... Will turn you out!
 ---GFI we build FAST---

flat_black

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 315
Re: Flat_blacks boosted non-intercooled bastard child B20A5
« Reply #29 on: June 03, 2013, 10:09:13 PM »

Never understood the fascination with food and beverage hose.

I used it for 1 reason, i wanted to see/monitor what gets past the catch can...

Its not used on any of my other junk.
Logged
Pages: [1] 2   Go Up