ITS A NO GO!
race track opened in Germany may first this year, so got car ready, and roll out to the to see what I will run 8 psi , note I have 11.5 psi spring in my wastegate, and boost controller set to 14psi, something is wrong, I double check my s300 boost setting. all seemed fine, second run the following day with slicks, yes I am gonna do some damage, cause you can't beat me a 20 psi ;D. boost set for 20 psi came out the hole like a bore out of hell
. 16psi on the 2step. 3rd gear I had no power one the race, but only at 4 psi after checking data log. I raced 3 more times before I quit.
drove my car home on the autobahn about 150 mph the whole way on 4 psi.
a week a of trouble shooting and and checking piping swapping wastegate springs, changing couplers and piping.
bypassing boost cantroller and all.
note car still drives good so I had no signs of a blocked cat.
last check after doing some thinking. normally I can hear the turbo through the exhaust at idle or low speeds. did not hear it. so I decided to check the cat , when I pulled it half the internals were already gone, the rest was just blocking the exhaust flow, punch the rest out :somb: and reinstalled, problem fixed instantly.
this happened to my friend last year except it did not block his exhaust it got blown out on its own.
magnalow high flow