:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)  (Read 4017 times)

efsohcFTW

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • RHMT
Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
« on: February 08, 2015, 05:35:35 PM »
So im DOING my first vitara build. Just got my block back from machine shop getting bore & honed to 75.mm, Notched, & Line bored. Woke up today with intensions of assembly everything. Than i find out wrist pin wont go thru piston and rod due to raised area inside piston. Its putting everything in a bind! Any past experiences & solutions would be greatly appreciated! Thanks in advance.
« Last Edit: February 08, 2015, 05:38:19 PM by efsohcFTW »
Logged
Flipnog is going to put my phone number on the back of a bathroom stall at a truck stop since I didn't make a proper noob post.

efsohcFTW

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • RHMT
Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
« Reply #1 on: February 08, 2015, 06:07:12 PM »
this raised area
Logged
Flipnog is going to put my phone number on the back of a bathroom stall at a truck stop since I didn't make a proper noob post.

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
« Reply #2 on: February 08, 2015, 06:37:16 PM »
Fuck you read how to do a intro post then might get help.

Did you really get your block bored to 75mm?
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
« Reply #3 on: February 08, 2015, 06:43:22 PM »
Your retarded. All this Is found if you type in your question into this thing that searches the Internet for answers.  It's called google....lol now follow the rules here. You need a intro post.

here is how something like that is done

http://www.realhomemadeturbo.com/forum/index.php/topic,14535.0.html

or something like this too works

http://www.realhomemadeturbo.com/forum/index.php/topic,25.0.html

Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

efsohcFTW

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • RHMT
Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
« Reply #4 on: February 08, 2015, 07:24:56 PM »
75.5mm my bad. Sorry i didnt put porn in my intro
Logged
Flipnog is going to put my phone number on the back of a bathroom stall at a truck stop since I didn't make a proper noob post.

highroller54

  • I caught the fable Novacorn
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10830
  • Spreading the rhmt word like PB&J
Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
« Reply #5 on: February 08, 2015, 07:35:24 PM »
Quote from: efsohcFTW on February 08, 2015, 07:24:56 PM
i didnt put porn in my intro

I didn't put the info you need to build your motor in my response, sorry.
Logged
Xenocron is a piece of shit.

I solve my problems like an adult, at the strip club drinking on a work night. http://www.competitiondiesel.com/forums/images/smilies/turbo1.gif

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
« Reply #6 on: February 08, 2015, 07:39:40 PM »
Douche
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
« Reply #7 on: February 12, 2015, 05:40:05 PM »
Rhmt self regulating hhahahahahah
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
« Reply #8 on: March 01, 2015, 12:58:19 AM »
Nice signature fgt
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog
Pages: [1]   Go Up
« previous next »