Topic: 0.30mm decked piston? (Read 25463 times)

walter · « **on:** June 10, 2015, 06:40:06 PM »

Hi, got a new Oem pistons, 81.5mm (+0.5mm), sent block to shop for overbore it, i see in the box show 0.30mm DECKED, what that means exactly? piston to wall clearance?

ratcityrex · « **Reply #1 on:** June 10, 2015, 08:13:54 PM »

Generally that means that they cut that much off the top of the block to square it up and make it flat. https://www.google.com/search?ie=UTF-8&client=ms-android-verizon&source=android-browser&q=decking.a+blocm&norc=1&zx=1433981591892#q=decking+a+engine+block

walter · « **Reply #2 on:** June 10, 2015, 08:23:51 PM »

that means pistons are 0.30mm shorter?

i know what means deck a block, but what i dont understand is what exactly means "0.30mm DECKED" writed in the pistons box.

HiProfile · « **Reply #3 on:** June 10, 2015, 09:00:04 PM »

You'd have to talk to the machinist. Nothing should be in the 0.3mm range for those pistons - piston to wall, piston to deck, etc. 0.3mm is ~0.011", which can be needed on some warped blocks.

News:

Author Topic: 0.30mm decked piston? (Read 25463 times)

walter

0.30mm decked piston?

ratcityrex

Re: 0.30mm decked piston?

walter

Re: 0.30mm decked piston?

HiProfile

Re: 0.30mm decked piston?