:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Build thread database... check it. (link)

Pages: [1]   Go Down

Author Topic: Turbo choices  (Read 1467 times)

Boostedeg

  • N00B *Read Intro Sticky*
  • *
  • Offline Offline
  • Posts: 2
  • RHMT
Turbo choices
« on: January 17, 2019, 01:24:22 AM »

New to the forum. Building a 92 e.g. sedan d16z6 speed factory forged pistons an vitara rods, stock head maybe some slight porting, stock intake manifold. Shooting for 300hp..  I have found a wh1c with the 12cm housing for a good peice question is is it to big?? Dont wanting somthing that will start spooling at 5k when red line is 7600 rpm.. Im all ears so please let me knw or give me ideas ect
Logged

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8341
  • RIP old hmt. SloS13 for King!!!
Re: Turbo choices
« Reply #1 on: January 17, 2019, 11:23:13 AM »

If you were going for bigger power I would say go for it. For the power level your shooting for, I would pick a smaller t3.
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

Boostedeg

  • N00B *Read Intro Sticky*
  • *
  • Offline Offline
  • Posts: 2
  • RHMT
Re: Turbo choices
« Reply #2 on: January 17, 2019, 03:53:11 PM »

Any recommendations?? I'm shooting for 3-400.. I would be happy with 300.. Any 1 have any luck with the ebay turbos?? Emusa??
Logged

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2249
  • B-North
Re: Turbo choices
« Reply #3 on: January 17, 2019, 04:43:48 PM »

used gt28rs
Logged
92GSR - mild interest

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7352
Re: Turbo choices
« Reply #4 on: January 18, 2019, 11:24:29 AM »

I know Ryan (malichite) did like 275hp on his dohc zc with a Ebay 57 turbo. Think it was in the neighborhood of 15psi. He didn't have any problems with it. I mean if I were you, I would look for a used holder hy35 with a 9cm housing. Or a Ebay gt28 or gr32 with a smaller t3 housing. If your trying to stay on a low buck budget.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437
Pages: [1]   Go Up