Topic: NORTHWEST DYNO DAY AFTERMATH THREAD (5.30.09) (Read 108938 times)

ratcityrex · « **Reply #61 on:** May 31, 2009, 11:45:27 PM »

Ryan your reving the piss out of her. I love how smooth it is, I bet it pulls good...lol
How many lbs are you pushing? Still at 15?

malichite · « **Reply #62 on:** May 31, 2009, 11:51:04 PM »

It hits 15 then falls to 12. Rips like a mother fucker. Dave did a bitchen jobb. Did you see my log info in my build thread?

ratcityrex · « **Reply #63 on:** May 31, 2009, 11:52:47 PM »

sure did, looks great.

malichite · « **Reply #64 on:** May 31, 2009, 11:53:52 PM »

theres still another 1000k in that bitch

ratcityrex · « **Reply #65 on:** June 01, 2009, 12:00:51 AM »

I dont know how well the flying rocker arms are gona like that...lol

Its just the little brother of the Ls and I know with bigger cams they like to fling the rockers.

Blacksi · « **Reply #66 on:** June 01, 2009, 12:07:11 AM »

i used to spit out the rockers all the time in the joe dirt zc

Random Hero · « **Reply #67 on:** June 01, 2009, 12:37:53 AM »

Quote from: Blacksi on June 01, 2009, 12:07:11 AM

i used to spit out the rockers all the time in the joe dirt zc

HAHA, I used to just "pry" them back into place.

BoostForLife · « **Reply #68 on:** June 01, 2009, 01:48:07 AM »

Good number. Love your setup because it's a del sol and has a ZC in it.

Your spool is way too late still with the .63 ar housing. Ebay t3/t4 shouldn't take more than 5k on any honda to build 15psi, especially with the desing of you mani, which is good by the way.

Take off the manifold check for crack, replace the exhaust gasket, and put the fourth bolt onto the turbo.
What's your exhaust setup past the turbo?

BoostForLife · « **Reply #69 on:** June 01, 2009, 01:49:41 AM »

Quote from: Blacksi on June 01, 2009, 12:07:11 AM

i used to spit out the rockers all the time in the joe dirt zc

Maybe that's what my ZC did on the way home from the dyno. Shit knocks rattles inside like a bitch only at some loads. Just brought it home about 4 hours ago, and some dumbshit ricer came to trade stock rear bumper and all side trim for the gay WW kit.

hatchboy · « **Reply #70 on:** June 01, 2009, 04:02:03 AM »

Any Vids yet? Fuckin middle eastern hadji's made me miss this shit. I am pissed, especially sense dave and i got my crx running the day before i had to leave. ughhh

BoostForLife · « **Reply #71 on:** June 01, 2009, 04:08:16 AM »

I have about 8 more to upload to photofucket and will open the album to the public.
It will have all of my above pics and pretty much most videos.

hatchboy · « **Reply #72 on:** June 01, 2009, 04:33:43 AM »

sweet, can we get them hosted on the media portion of this site?

Urban Indian · « **Reply #73 on:** June 01, 2009, 05:37:50 AM »

vids?

anyone know how to edit videos and shit? I need a quick and dirty lesson

Vadim · « **Reply #74 on:** June 01, 2009, 09:04:13 AM »

Quote from: Urban Indian on June 01, 2009, 05:37:50 AM

vids?

anyone know how to edit videos and shit? I need a quick and dirty lesson

Too bad I couldn't stick to the end, what number did you get?

Rich_tuned · « **Reply #75 on:** June 01, 2009, 09:38:32 AM »

Quote from: hatchboy on May 31, 2009, 12:01:51 PM

Rich, im dan, dustin long and tino's friend from down south, you still working out of tino's shop? It's nice to see you on the board.

Thanks Dan. I'm not down in olympia anymore, I moved back up north about a month ago. I will be going back to Pina motorsports in a few weeks. I missed the dyno.

Rich_tuned · « **Reply #76 on:** June 01, 2009, 09:42:38 AM »

Quote from: flat_black on May 31, 2009, 10:17:19 PM

Yet again im the only prelude

and im the only DA!

Rich_tuned · « **Reply #77 on:** June 01, 2009, 09:47:02 AM »

Quote from: bigdaddyvtec on May 31, 2009, 02:07:35 PM

Good to see you Rich!!!

Glad you came out.

Thanks, it was fun. I wish i stayed all day!

Rich_tuned · « **Reply #78 on:** June 01, 2009, 09:48:45 AM »

Quote from: malichite on May 31, 2009, 02:15:38 PM

Welcome to the site Nig Nog!

Thanks, I think we need to race the heavy DA vs the del slow! lol

malichite · « **Reply #79 on:** June 01, 2009, 09:52:35 AM »

Quote from: BoostForLife on June 01, 2009, 01:48:07 AM

Good number. Love your setup because it's a del sol and has a ZC in it.

Your spool is way too late still with the .63 ar housing. Ebay t3/t4 shouldn't take more than 5k on any honda to build 15psi, especially with the desing of you mani, which is good by the way.

Take off the manifold check for crack, replace the exhaust gasket, and put the fourth bolt onto the turbo.
What's your exhaust setup past the turbo?

4ft of 2.5

malichite · « **Reply #80 on:** June 01, 2009, 09:54:07 AM »

Quote from: Rich_tuned on June 01, 2009, 09:48:45 AM

Quote from: malichite on May 31, 2009, 02:15:38 PM

Welcome to the site Nig Nog!

Thanks, I think we need to race the heavy DA vs the del slow! lol

Fuck Yeah, DA vs Honda's Sherman tank :p

Rich_tuned · « **Reply #81 on:** June 01, 2009, 10:01:48 AM »

Quote from: malichite on June 01, 2009, 09:54:07 AM

Fuck Yeah, DA vs Honda's Sherman tank :p

btw, good numbers! I bet she's fun on the street

QikEnuF · « **Reply #82 on:** June 01, 2009, 10:02:27 AM »

The moral of this thread is buk is a faggot.

Looks like you guys had a hell of a time. Good shit. And yeah, East Coast needs one of these

d112crzy · « **Reply #83 on:** June 01, 2009, 11:03:12 AM »

Holy shit Rich, this forum has a multiple quoting option, use it.

QikEnuF · « **Reply #84 on:** June 01, 2009, 11:14:30 AM »

Quote from: d112crzy on June 01, 2009, 11:03:12 AM

Holy shit Rich, this forum has a multiple quoting option, use it.

He is trying to get into the porn forum, idiot

d112crzy · « **Reply #85 on:** June 01, 2009, 11:28:12 AM »

Nothing great there.

BoostForLife · « **Reply #86 on:** June 01, 2009, 11:44:29 AM »

Urban Indian, just stick all that shit into windows moviemaker. Import all videos, and then just put them in whatever order you want. Then add title, caption, and other shit that you want. Then render it.
MovieMaker in Vista in superb compared to XP one because you render shit in HD.

If you niggas want I can upload all my videos straight to this media section in raw .avi files that are watchable, and then someone can edit them anyway they want.

Kenny Rogers · « **Reply #87 on:** June 01, 2009, 12:06:43 PM »

I got a printout of my dyno, but the printer screwed it up a bit... Anyone know the SAE correction factor? (If they used it at all)

ratcityrex · « **Reply #88 on:** June 01, 2009, 12:52:46 PM »

Anyone know of a free program that will convert quicktime format to avi? I tried some online free program but it wouldnt covert the sound. So you have a vid of a car on the dyno but no sound. Its Kinda gay to watch a dyno pull with no sound.

random-strike · « **Reply #89 on:** June 01, 2009, 01:07:15 PM »

Quote from: ratcityrex on June 01, 2009, 12:52:46 PM

Anyone know of a free program that will convert quicktime format to avi? I tried some online free program but it wouldnt covert the sound. So you have a vid of a car on the dyno but no sound. Its Kinda gay to watch a dyno pull with no sound.

i'll convert it, i have ffmpeg but its a command line thing that my site uses to convert. hey, actually i know a better idea... upload it to my website, then go to the video and click download original video.

http://www.dragcityvideos.com

News:

Author Topic: NORTHWEST DYNO DAY AFTERMATH THREAD (5.30.09) (Read 108938 times)

BoostForLife

BoostForLife

BoostForLife

Vadim

QikEnuF

QikEnuF

BoostForLife