:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

GET YOUR OFFICIAL REALHOMEMADETURBO.COM STICKERS! (link)

Pages: [1]   Go Down

Author Topic: Aligning fender and door  (Read 5676 times)

Doug

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8838
  • Get Doug'd biatch
Aligning fender and door
« on: June 02, 2009, 08:38:12 PM »
So when I went to look at my hatch it was a little dusky and couldn't see everything. After I got it (even though it has a clean carfax) I can see it has been hit and they replaced the door (when I took the panel off to install keyless it is red). The fender looks original, and has the VIN printed on it, so I assume they took it off the replace the door.

Anyways, when I open the door (passenger side) it kinda "pops" open when I pull the handle. Also the fender and door don't align with the pillar as you can see from the pictures bellow. The door leaks a little right around where it sticks out too, so I not only need to align it to make it look right, but to fix the leak. So my question is what is the easiest way to align the door and fender? This is on a 99 Civic Hatchback



Logged

Ravage70

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6286
  • The Hotrex foot. Stiletto ready!
Re: Aligning fender and door
« Reply #1 on: June 03, 2009, 12:55:19 AM »
Your pillar looks bent in.
Best thing to do is not notice it and sell it...
Logged

Doug

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8838
  • Get Doug'd biatch
Re: Aligning fender and door
« Reply #2 on: June 03, 2009, 01:14:17 AM »
Na pillar is straight the door is just aligned bad I'm pretty sure. If not might just sell it lol
Logged

Kain

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6030
Re: Aligning fender and door
« Reply #3 on: June 03, 2009, 02:23:42 AM »
looks like the car was repainted.
Logged

Doug

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8838
  • Get Doug'd biatch
Re: Aligning fender and door
« Reply #4 on: June 03, 2009, 05:44:59 AM »
Hints me saying the door is red under the panel
Logged

90boostdaccord

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4637
Re: Aligning fender and door
« Reply #5 on: June 03, 2009, 11:10:20 AM »
maybe the door just got hit an was dented.  I wouldn't sell it, take it to a body shop and see what they say, just tell them you are getting a few quotes, hopefully you can fix it urself
« Last Edit: June 03, 2009, 01:19:56 PM by 90boostdaccord »
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: Aligning fender and door
« Reply #6 on: June 03, 2009, 01:15:06 PM »
What kind of car is it? My crx pops when I open the door, but its the limiter thats busted on it not a bad alignment. I know that ist pretty common for people to over extend there honda crx doors and bust the spot welds on the back side of the limiter.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

Doug

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8838
  • Get Doug'd biatch
Re: Aligning fender and door
« Reply #7 on: June 03, 2009, 08:54:09 PM »
Quote from: Doug on June 02, 2009, 08:38:12 PM
This is on a 99 Civic Hatchback

Quote from: ratcityrex on June 03, 2009, 01:15:06 PM
What kind of car is it?

I looked at it today and the fender has washers to make it match the door. I'm guessing he changed doors and didn't align it so just made the fender align it.
Logged
Pages: [1]   Go Up
« previous next »