:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: 1 2 [3]   Go Down

Author Topic: EJ8 build thread. the never ending flip flopper project  (Read 18168 times)

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
Re: EJ8 build thread. Holset, sinktrap, etc.
« Reply #60 on: June 20, 2009, 07:09:20 PM »
Had some serious problems with the tune on my new injectors. somehow the TPS wasn't giving me any voltage. long story, but it's all fixed now. I had to modify an LS throttle body with an OEM adjusted TPS, and it cleared up that problem. Now that it idles, i'll go for some street tuning later when my girl gets home. hopefully I can make a 15psi ripper vid tomorrow.
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: EJ8 build thread. Holset, sinktrap, etc.
« Reply #61 on: June 20, 2009, 11:20:46 PM »
Good luck, sir.
Logged

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
Re: EJ8 build thread. Holset, LOG, etc.
« Reply #62 on: June 28, 2009, 12:56:06 PM »
The plan right now is to setup this car as daily driver friendly as possible, while keeping it boosted.. that means removal of the bigger injectors, turbo, etc. being replaced with those closer to a 300whp factory performance. The sinktrap was sold, and profit was made on it.

a log manifold from weir was purchased to accommodate the A/C compressor, power steering is a joke in my car, so it will remain absent.

also, purchased a set of 450's, so i can throw my old tune of, which drove like a stock car.


All the good stuff will be added to the 240sx, and eventually it will become my daily driver, and this coupe will be sold in N/A form, since people looking for a 4banger civic don't really care about the turbo stuff.

I will update this once it's back to a comfortable ride, just to conclude this thread, and a KA24DE thread build will start.
« Last Edit: July 11, 2009, 04:17:39 PM by marcj »
Logged

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
Re: EJ8 build thread. Holset, sinktrap, etc.
« Reply #63 on: July 11, 2009, 04:18:36 PM »
What trim should I get for the torque-less b16?? 50?? my old 57 trim wasn't bad at all.
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: EJ8 build thread. Holset, sinktrap, etc.
« Reply #64 on: July 12, 2009, 11:04:52 AM »
WISHY WASHY
Logged

boosted 00 black si

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1560
Re: EJ8 build thread. Holset, sinktrap, etc.
« Reply #65 on: July 12, 2009, 11:27:29 AM »
60-1 n call it a day  8)
Logged
go fuck your self

BORN TO BOOST
LITTLE B16.400whp on 16psi

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
Re: EJ8 build thread. Holset, sinktrap, etc.
« Reply #66 on: July 12, 2009, 11:43:56 AM »
Quote from: Joseph Davis on July 12, 2009, 11:04:52 AM
WISHY WASHY

listen here, JD................ that is all I have to say.
Logged

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
Re: EJ8 build thread. the never ending flip flopper project
« Reply #67 on: July 19, 2009, 03:01:06 PM »
bored.. here's some pics



flipping the compressor to the other side since it's impossible to clear A/C with a Holset




partially tucked and painted





finally found an OEM knob I liked for free


Logged

hotrex

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 13021
  • rough riding niggas since 2002
Re: EJ8 build thread. the never ending flip flopper project
« Reply #68 on: July 19, 2009, 09:01:47 PM »
my hx35 is gates open 14.7 psi @ 4400rpms with the divided topmount i built.   i love it
Logged
1. nbspnbsp choda nbspnbsp 584 up, 134 down
 area between your bag and your asshole
Johnny bliss'#039#039s mom really worked my choda yesterday, I wont be able to ride my bike for a week

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
Re: EJ8 build thread. the never ending flip flopper project
« Reply #69 on: July 19, 2009, 09:21:09 PM »
Quote from: hotrex on July 19, 2009, 09:01:47 PM
my hx35 is gates open 14.7 psi @ 4400rpms with the divided topmount i built.   i love it

that's tits! how much whp/torque? I REALLY regret not building an ls/vtec instead. live & learn  :noel:
Logged

hotrex

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 13021
  • rough riding niggas since 2002
Re: EJ8 build thread. the never ending flip flopper project
« Reply #70 on: July 19, 2009, 10:16:54 PM »
5500rpm logging 14.6psi netted me 320whp 245tq.

had a bum set of 780s in it and couldnt make a full pull without it leaning out. so thats the best i did that day. just put my new injects in the car today. so ill try againi soon. but yea it spools rediculously quick and it comes on hard
Logged
1. nbspnbsp choda nbspnbsp 584 up, 134 down
 area between your bag and your asshole
Johnny bliss'#039#039s mom really worked my choda yesterday, I wont be able to ride my bike for a week

boosted 00 black si

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1560
Re: EJ8 build thread. the never ending flip flopper project
« Reply #71 on: July 20, 2009, 08:14:37 AM »
fuck lsvtec b16 make power to i  put out close to 400hp and 250 torque on 16psi with a
60-1 turbo on pump  8) i wlill break 500hp in aug when i go back to the dyno with meth injection  :noel:

Quote from: hotrex on July 19, 2009, 10:16:54 PM
5500rpm logging 14.6psi netted me 320whp 245tq.

had a bum set of 780s in it and couldnt make a full pull without it leaning out. so thats the best i did that day. just put my new injects in the car today. so ill try againi soon. but yea it spools rediculously quick and it comes on hard
« Last Edit: July 20, 2009, 08:16:50 AM by boosted 00 black si »
Logged
go fuck your self

BORN TO BOOST
LITTLE B16.400whp on 16psi

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: EJ8 build thread. the never ending flip flopper project
« Reply #72 on: July 20, 2009, 08:38:42 AM »
Quote from: boosted 00 black si on July 20, 2009, 08:14:37 AM
fuck lsvtec b16 make power to i  put out close to 400hp and 250 torque on 16psi with a
60-1 turbo on pump  8) i wlill break 500hp in aug when i go back to the dyno with meth injection  :noel:

Fuck B16, all they are is peaky and they break sleeves.
Logged
Pages: 1 2 [3]   Go Up
« previous next »