:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: can someone take a picture on Integra A/C condenser pieces for me?  (Read 8275 times)

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
can someone take a picture on Integra A/C condenser pieces for me?
« on: June 07, 2009, 01:06:45 PM »
I am toying with the idea of running the integra A/C condenser setup in my coupe. basically I made a sinktrap (top mount) and it clears the A/C compressor with plenty of room, but the large turbo sits where the a/c lines go.. so I've been looking at the integra condenser and how it sits in the area between the intercooler and the radiator.. if it bolts up at the fire wall I believe I could make it work..


so, can anyone that has A/C setup for an integra take some detailed pictures of the condenser setup? I really need to see how it bolts up at the firewall
Logged

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
Re: can someone take a picture on Integra A/C condenser pieces for me?
« Reply #1 on: June 07, 2009, 01:27:01 PM »
nevermind.. i'm going to just hit the yard and get what I need, and go from there.. hopefully it wont be a waste of time. FL heat is killing me!
Logged

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: can someone take a picture on Integra A/C condenser pieces for me?
« Reply #2 on: June 07, 2009, 04:59:49 PM »
i have an Integra? anyway, its not gonna work. one of the AC lines is in the same spot as the EK. the one with the low side nipple on it. its gonna be wanting to sit where your turbo is...
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

d112crzy

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3449
  • white power
    • CrzyTuning
Re: can someone take a picture on Integra A/C condenser pieces for me?
« Reply #3 on: June 07, 2009, 05:34:29 PM »
AC is for pussies.

You can't complain much dude, you live towards the main land so humidity there isn't anywhere near as bad as down south. I would know.
Logged
www.crzytuning.com


Nobody comes into my house and shits all over it.  

marcj

  • Marc Jew
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1956
  • Never alone, Never again. (NA)
Re: can someone take a picture on Integra A/C condenser pieces for me?
« Reply #4 on: June 07, 2009, 08:28:21 PM »
Quote from: d112crzy on June 07, 2009, 05:34:29 PM
AC is for pussies.

You can't complain much dude, you live towards the main land so humidity there isn't anywhere near as bad as down south. I would know.

overall it's not bad; it's sitting in rush hour traffic at a dead stop with hundreds of cars in a row heating up the air in your face  :?:

Quote from: turbohf on June 07, 2009, 04:59:49 PM
i have an Integra? anyway, its not gonna work. one of the AC lines is in the same spot as the EK. the one with the low side nipple on it. its gonna be wanting to sit where your turbo is...

dammit.. I wonder if there is a way to do custom lines.
Logged

dvst8r

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3737
  • Unobtainium
Re: can someone take a picture on Integra A/C condenser pieces for me?
« Reply #5 on: June 07, 2009, 08:35:47 PM »
Quote from: marcj on June 07, 2009, 08:28:21 PM
dammit.. I wonder if there is a way to do custom lines.

A competent AC shop should have no problem doing custom lines.
Logged
There are two kinds of people: Sheep and sharks. Sharks are winners and they don'#039#039t look back '#039#039cause they don'#039#039t have necks. Necks are for sheep.

Conceptz-X

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2118
Re: can someone take a picture on Integra A/C condenser pieces for me?
« Reply #6 on: June 07, 2009, 10:00:38 PM »
Quote from: dvst8r on June 07, 2009, 08:35:47 PM
A competent AC shop should have no problem doing custom lines.
+1
Logged

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: can someone take a picture on Integra A/C condenser pieces for me?
« Reply #7 on: June 08, 2009, 12:40:01 AM »
personally i would just bend the shit out of them till they work the way you want.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'
Pages: [1]   Go Up
« previous next »