:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Got video of your car doing rippers or dirty 2/3rds? post them up! (link)

Pages: [1]   Go Down

Author Topic: getting car to idle with 3 wire IAC, drill TB blade??  (Read 2839 times)

bouncinofftherevlimiter

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 456
getting car to idle with 3 wire IAC, drill TB blade??
« on: June 24, 2009, 07:22:41 PM »

the intake on my car is off a F20B, (from accord sir-t) and it has a 3 wire IAC. i cant seem to find any way to make it work with OBD1 and crome. right now im just using throttle cable tension and i hate how it is unreliable, it is all over the place and you constantly have to slap the pedal coming up to a light or any sort of stop so it dosent idle at 2500...

i remember an old trick from the domestic days was to drill a small hole in the primary blades of the holley carbs to help big cam cars idle. should i try that or is it going to cause problems? dont know how it will but just thought i would ask. i think im still going to have to use cable tension, but i thought maybe this would make it better.
Logged
No longer own a turbo car...

94 Accord, first running 4g63 piston/h22 rod/f22 block &ampamp crank

HX35 18lb 486hp/391tq

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7370
Re: getting car to idle with 3 wire IAC, drill TB blade??
« Reply #1 on: June 24, 2009, 07:58:58 PM »

Just disconect it, adjust your idle screw and adjust your throttlestop and call it a day.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

chris

  • Guest
Re: getting car to idle with 3 wire IAC, drill TB blade??
« Reply #2 on: June 24, 2009, 10:14:22 PM »

Numerous companies make a flange so you can add a 2 wire iacv to that manifold
Logged

bouncinofftherevlimiter

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 456
Re: getting car to idle with 3 wire IAC, drill TB blade??
« Reply #3 on: June 24, 2009, 10:25:50 PM »

Numerous companies make a flange so you can add a 2 wire iacv to that manifold


i searched all over with no avail.

if you could please send me a link i will appreciate it

thank you very much
Logged
No longer own a turbo car...

94 Accord, first running 4g63 piston/h22 rod/f22 block &ampamp crank

HX35 18lb 486hp/391tq

chris

  • Guest
Re: getting car to idle with 3 wire IAC, drill TB blade??
« Reply #4 on: July 06, 2009, 06:26:19 PM »

locashracing.com
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

bouncinofftherevlimiter

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 456
Logged
No longer own a turbo car...

94 Accord, first running 4g63 piston/h22 rod/f22 block &ampamp crank

HX35 18lb 486hp/391tq
Pages: [1]   Go Up