Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[bouncinofftherevlimiter]

the intake on my car is off a F20B, (from accord sir-t) and it has a 3 wire IAC. i cant seem to find any way to make it work with OBD1 and crome. right now im just using throttle cable tension and i hate how it is unreliable, it is all over the place and you constantly have to slap the pedal coming up to a light or any sort of stop so it dosent idle at 2500...

i remember an old trick from the domestic days was to drill a small hole in the primary blades of the holley carbs to help big cam cars idle. should i try that or is it going to cause problems? dont know how it will but just thought i would ask. i think im still going to have to use cable tension, but i thought maybe this would make it better.

[ratcityrex]

Just disconect it, adjust your idle screw and adjust your throttlestop and call it a day.

[chris]

Numerous companies make a flange so you can add a 2 wire iacv to that manifold

[bouncinofftherevlimiter]

Numerous companies make a flange so you can add a 2 wire iacv to that manifold

i searched all over with no avail.

if you could please send me a link i will appreciate it

thank you very much

[chris]

locashracing.com

[glustic]

locashracing.com

http://www.locashdyno.com/store2/index.php?main_page=product_info&cPath=70&products_id=256

[bouncinofftherevlimiter]

locashracing.com

http://www.locashdyno.com/store2/index.php?main_page=product_info&cPath=70&products_id=256

thanks!