Topic: EK4 4Door - JDM SiR Buildup (Read 6807 times)

b20beast · « **on:** July 08, 2009, 10:09:05 PM »

Here is some history for those who don't know.

So my engine blew
I suspect bad grounds, found a broken ground wire on my thermo housing.
Probably gave bad map readings at WOT.

Also pressure tested head, and found cracks.
Also found a broken VALVE SPRING.

Leaky turbo, due to banged up oil pan, and oil not draining free.

OLD Setup

Made a weak 203whp / 141TQ at 6psi.

Car paint was very dull, some cock sucker decided to fuck up my paint some time ago...
so i used thinners to remove the stuff on the body.

had some dents, some bitch reversed into my rear quater/fender.
some scratches and dents on the body from people leaning on the car....

So i decided when i pull the engine, i would remove everything in the bay, and paint that area and body.

By jdmking at 2009-07-08

Picked up a Blitz muffler, 2.5" to be stealthy

By jdmking at 2009-07-08

By jdmking at 2009-07-08

Picked up 2 Bride Seats to replace my JDM motorized seats, really heavy!!

By jdmking at 2009-07-08

Random pic of the motor / b16a

By jdmking at 2009-07-08

By jdmking at 2009-07-08

On to the interesting stuff, parts list

Build from the bottom go up

Suspension
Tanabe Sustec Springs
Koni Yellow Shocks

Wheels
Work Emotion Cr Kai - Bronze

Brakes
Stock SiR Brakes
Goodrige SS Brake Lines
Hawk Pads

Interior
Bride Brix Seats

Exhaust
2.5" Mandrel Bent Dp
2.5" Mandrel Bent Exhaust
Blitz Muffler

Transmission
B16A
OBX LSD
ACT Pressure Plate
Copper Clutch
Innovate Race Mounts

Bottom End
B16a Block
Arp Rod Headstuds
ZACL STD Bearings
Eagle Rods
SRP Pistons STD Bore

Head
NONE at the moment, but should have upgraded valve springs
00 ITR Cams
Skunk2 Cam Gears

Fuel
Precision 880cc Injectors
Walbro 255
Aeromotive Fuel Pressure Regulator

Turbo
Garrett T3/T4 60 Trim .63 AR
Spooling Performance Aluminum Intercooler Piping
TiAL BOV 50mm
TiAL 38mm Wastegate
Precision 350HP Intercooler
Ebay Cast Manifold
B&R Fittings Oil Catch Can

Management
eCtune
PLX Wideband

Backshot

By jdmking at 2009-07-08

b20beast · « **Reply #1 on:** July 08, 2009, 10:23:37 PM »

Parts I need
Aluminum Radiator - SOLD my old one
Boost Controller / PWM
Demon - Sold my Ostrige and hulog
Gauges - Oil Pressure, Oil Temp, Water Temp, EGT, Fuel Pressure
Momo Wheel + Hub
3Bar Map sensor
Radiator Hoses
Water Pump
Upgraded Valve Springs

and most important $$$$$$$$$$$$

speedjunky01 · « **Reply #2 on:** July 08, 2009, 10:26:29 PM »

nice where is the porn??

b20beast · « **Reply #3 on:** July 08, 2009, 10:29:04 PM »

Quote from: speedjunky01 on July 08, 2009, 10:26:29 PM

nice where is the porn??

playboy.com
;D

speedjunky01 · « **Reply #4 on:** July 08, 2009, 10:30:04 PM »

Quote from: b20beast on July 08, 2009, 10:29:04 PM

Quote from: speedjunky01 on July 08, 2009, 10:26:29 PM
nice where is the porn??

playboy.com
;D

STFU and post porn to couter the JDM faggotry posted in this thread

b20beast · « **Reply #5 on:** July 08, 2009, 10:51:09 PM »

Car how i first bought it

jdm interior

SiR Interior

2005 year

Downpipe Heat Wrap and Silicon Spray

By jdmking at 2009-07-08

Dumptube

By jdmking at 2009-07-08

broken shit

By jdmking at 2009-07-08

b20beast · « **Reply #6 on:** July 08, 2009, 10:53:19 PM »

my daughter

By jdmking at 2009-07-08

she says, bike goes VROOM!

b20beast · « **Reply #7 on:** July 08, 2009, 11:11:15 PM »

front shot

By jdmking, shot with DSC-P72 at 2007-08-28

b20beast · « **Reply #8 on:** July 09, 2009, 03:31:07 PM »

car at bodyshop

By jdmking at 2009-07-09

b20beast · « **Reply #9 on:** July 11, 2009, 09:14:33 PM »

one fucking comment?

dvst8r · « **Reply #10 on:** July 11, 2009, 09:23:00 PM »

Looks like an HT build, no one here cares about bride seats, and Blitz fucking mufflers.

The only representaion of the part of the "build" that anyone here will care to see is a hanging downpipe, show us the turbo build not the JDM faggotry.

Finally all this JDM shit would have been a lot easier to take, had you posted porn.

b20beast · « **Reply #11 on:** July 11, 2009, 09:26:35 PM »

srp piston and eagle rod

By jdmking at 2009-07-08

b20beast · « **Reply #12 on:** July 11, 2009, 09:27:34 PM »

By jdmking, shot with Motorola Phone at 2009-03-28

my fucking smoking turbo

b20beast · « **Reply #13 on:** July 11, 2009, 09:30:39 PM »

Here is the RHMT part
my build and price list

Turbo Manifold      70.00
TurboCharger      235.00
Wastegate      135.00
Blow Off Valve      120.00
Intercooler      165.00
Intercooler pipe      190.00
880cc injectors      175.00
pistons      75.00
fuel pump      115.00
rods      230.00
catch can      290.00
blitz muffler cost me 20 bucks
bride seats cost me 190us

picked up a momo steering with boss kit for 70bucks

b20beast · « **Reply #14 on:** July 11, 2009, 09:33:23 PM »

Quote from: b20beast on July 11, 2009, 09:26:35 PM

srp piston and eagle rod

By jdmking at 2009-07-08

hows that

glustic · « **Reply #15 on:** July 11, 2009, 09:52:19 PM »

This thread blows ass.... No porn and lots of JDM bullshit...

Jay, we have a new faggot for the wednesday ban..

b20beast · « **Reply #16 on:** July 11, 2009, 09:53:58 PM »

no jdm love here

what do you guys like

dvst8r · « **Reply #17 on:** July 11, 2009, 09:58:04 PM »

The last two pics have been about the only thing worth wile in this thread yet.

To find out what we like, you should read some other build threads. There are a number on the first page that have done it right.

b20beast · « **Reply #18 on:** July 11, 2009, 10:02:43 PM »

By jdmking, shot with Motorola Phone at 2009-03-28

b20beast · « **Reply #19 on:** July 11, 2009, 10:03:55 PM »

By jdmking, shot with Motorola Phone at 2009-03-28

notfastcrx · « **Reply #20 on:** July 15, 2009, 03:05:23 PM »

do all your shit in one post, not 35, post porn, and sit back and shut up

ratcityrex · « **Reply #21 on:** July 15, 2009, 05:23:25 PM »

You spent $290.00 on a catch can

b20beast · « **Reply #22 on:** July 15, 2009, 08:15:42 PM »

Quote from: ratcityrex on July 15, 2009, 05:23:25 PM

You spent $290.00 on a catch can

bling points

dvst8r · « **Reply #23 on:** July 15, 2009, 08:36:35 PM »

Who is giving out these "bling points" and what do they add up to? Do you win a prize if you attain a certain number of these points?

b20beast · « **Reply #24 on:** July 15, 2009, 08:40:04 PM »

Quote from: dvst8r on July 15, 2009, 08:36:35 PM

Who is giving out these "bling points" and what do they add up to? Do you win a prize if you attain a certain number of these points?

your mom

dvst8r · « **Reply #25 on:** July 15, 2009, 08:41:30 PM »

My mom is giving out the points, or she is the prize? It is a conflict of interest for both to be true.

b20beast · « **Reply #26 on:** July 15, 2009, 08:42:58 PM »

lol

i know this is real home made turbo
but its a nice build

News:

Author Topic: EK4 4Door - JDM SiR Buildup (Read 6807 times)