Topic: RHMT Workshops (Read 11314 times)

AstroVannin · « **on:** March 10, 2009, 03:08:01 PM »

I think we used ot have one of these threads.

Il add more pics to mine later.

ApexSilver06MR · « **Reply #1 on:** March 10, 2009, 03:10:40 PM »

i was just thinking about making a post like this but i havent taken pics of the garage yet....

i may just do it tonight then

Loki · « **Reply #2 on:** March 10, 2009, 03:38:24 PM »

Here is mine $:-\$

Rosario4124 · « **Reply #3 on:** March 10, 2009, 03:40:02 PM »

Quote from: Loki on March 10, 2009, 03:38:24 PM

Here is mine $:-\$

where the hell is that?

Loki · « **Reply #4 on:** March 10, 2009, 03:40:41 PM »

Quote from: Rosario4124 on March 10, 2009, 03:40:02 PM

where the hell is that?

In my backyard.

dvst8r · « **Reply #5 on:** March 10, 2009, 03:41:31 PM »

Quote from: Loki on March 10, 2009, 03:40:41 PM

Quote from: Rosario4124 on March 10, 2009, 03:40:02 PM
where the hell is that?

In my backyard.

LOL, where is the ford?

dvst8r · « **Reply #6 on:** March 10, 2009, 03:44:52 PM »

I hope somebody has a pic of 90dx's collapsed "shop" Under 6 ft of snow.

MantisX · « **Reply #7 on:** March 10, 2009, 03:47:24 PM »

That shits better than mine. I work out in the open. Whered you get that tarp/covering/silver shit?

MantisX

Lowerit · « **Reply #8 on:** March 10, 2009, 03:54:57 PM »

I live in a 1 bedroom apartment, use my storage closet to build motors (it's 4x

On weekends I drive 450 miles round trip to use my old mans Garage. Enough space for 16 cars, in 3 buildings. All heated too. Quite pathetic for a 31 yr old... Lost my townhouse 3 years ago when I broke up with a long time GF. ..it's been a long crawl back. Hope to get a house this year. Places near my new work are cheap (out in the country)

Tools I can't live without

-Sawsall
-Delta Chop saw
-Ching chong band saw
-Lincoln Migpack W / gas
-Miller Plasma
-3 angle grinders , 1 Cut , 1 grind, 1 Flapper
-compressor (I want a bigger one)

Loki · « **Reply #9 on:** March 10, 2009, 04:48:04 PM »

Quote from: dvst8r on March 10, 2009, 03:41:31 PM

Quote from: Loki on March 10, 2009, 03:40:41 PM
Quote from: Rosario4124 on March 10, 2009, 03:40:02 PM
where the hell is that?

In my backyard.

LOL, where is the ford?

I was standing right in front of it

MantisX · « **Reply #10 on:** March 10, 2009, 05:15:48 PM »

Quote from: Lowerit on March 10, 2009, 03:54:57 PM

I live in a 1 bedroom apartment, use my storage closet to build motors (it's 4x On weekends I drive 450 miles round trip to use my old mans Garage. Enough space for 16 cars, in 3 buildings. All heated too. Quite pathetic for a 31 yr old... Lost my townhouse 3 years ago when I broke up with a long time GF. ..it's been a long crawl back. Hope to get a house this year. Places near my new work are cheap (out in the country)

Tools I can't live without

-Sawsall
-Delta Chop saw
-Ching chong band saw
-Lincoln Migpack W / gas
-Miller Plasma
-3 angle grinders , 1 Cut , 1 grind, 1 Flapper
-compressor (I want a bigger one)

Quite a collection your father has there. Whats the creme colored car on the right?

MantisX

Tim · « **Reply #11 on:** March 10, 2009, 05:24:29 PM »

looks like another corvair

Lowerit · « **Reply #12 on:** March 10, 2009, 05:46:48 PM »

My 65 Corvair Corsa, Blow throu , turbo (t04E) intercooled (via reversed WRX intercooler) 2.6 Ltr flat 6, forged pistons. AZ car with 0 rust.

1991civicsi · « **Reply #13 on:** March 10, 2009, 06:18:09 PM »

I'm jealous

ApexSilver06MR · « **Reply #14 on:** March 10, 2009, 06:19:33 PM »

90dx · « **Reply #15 on:** March 10, 2009, 07:46:13 PM »

junkyard racer · « **Reply #16 on:** March 10, 2009, 08:12:06 PM »

Here is my garage

My toolbox. Snap-on top box and craftsman bottom. Ive got a mix of snap-on and craftsman tools.

And here is my workbench. I am weird when I work on shit. I have to be super organized or I get all fluttered while working on anything.

junkyard racer · « **Reply #17 on:** March 10, 2009, 09:17:56 PM »

The longer ratchet, ive busted and had to have a new hammer and gear put in. A friend of mine tried to bust some head bolts loose and the guts let go. Its a single hammer. I like it though. I dont see it on the snap-on site anymore. I know its not dual hammer, I rebuilt it. It looks like its replaced by a dual hammer, FHLF80

The smaller ratchet (FH80) is dual hammer and I forget what the gearing is in it, but its totally bitchin. I love it.

fearsomedan · « **Reply #18 on:** March 10, 2009, 09:54:52 PM »

That's right. My workshop is in the skreets nukka.

This is my tool box.

If you don't find the tool you need in the trunk, then you don't belong near a car,

Travis · « **Reply #19 on:** March 10, 2009, 10:02:42 PM »

Lol, do all you BC guys have those C-Tire garages? I'll get some of mine, brb

Evans Performance · « **Reply #20 on:** March 10, 2009, 10:21:58 PM »

this spot reserved for mine after i clean it. nobody should every have to see it the way is is now.

some of you nogs make me feel like i have a super shop though

dvst8r · « **Reply #21 on:** March 10, 2009, 10:33:13 PM »

Quote from: 90dx on March 10, 2009, 07:46:13 PM

Where are the ones with the tunnel / pass to the back shed? Did you take any the night the first one collapsed?

brine04 · « **Reply #22 on:** March 10, 2009, 10:59:25 PM »

Yeah it's an old barn that is about to collapse.

dvst8r · « **Reply #23 on:** March 10, 2009, 11:03:49 PM »

My OLD shop in PG, also known as Basement Fab.

Random ground clamp shot.

Some found scrap metal on top of a coffee table makes for a perfect welding bench. Yes that is the OG'fold getting modified for Black Whorenet use.

Yes that is a Dyansty 200dx, Yes I know it costs more then most builds on rHMT, Yes I know I am welding in my Basment, Yes once you weld sitting on a couch you will never go back to anything else

How we wire things at Basement Fab.
Step 1) Unplug Dryer
Step 2) Turn off breaker
Step 3) Plug wire ends from extension cord into socket
Step 4) Turn on breaker
Step 5) Weld
Step 6) Stop welding so wife can do a load of laundry.

And one last one mobile welding in Pistol's step dad's nice heated garage, but no work bench...

Reserved Space for New Garage, coming this weekend when I actually stop post whoring and get out there, that and it is supposed to be above 0.

Evans Performance · « **Reply #24 on:** March 11, 2009, 07:19:49 AM »

you assholes and your basements. in FL that would be a swimming pool under your house

delspool · « **Reply #25 on:** March 11, 2009, 10:15:48 AM »

i still havent figured out what the original owners were thinking when they built this

dvst8r · « **Reply #26 on:** March 11, 2009, 10:40:11 AM »

Quote from: Evans Performance on March 11, 2009, 07:19:49 AM

you assholes and your basements. in FL that would be a swimming pool under your house

Yeah but in FL I wouldn't have 6 feet of snow piled up around the outside of the house and it be -30 out all winter either.

Here are some outside pics in the SPRING after it has already melted a fair bit as you can see by the driveway and the roof.

malichite · « **Reply #27 on:** March 15, 2009, 01:24:34 AM »

fysh · « **Reply #28 on:** March 15, 2009, 02:40:22 PM »

Quote from: malichite on March 15, 2009, 01:24:34 AM

Holy fuck, life size image of your garage?

b20accord · « **Reply #29 on:** March 15, 2009, 02:43:53 PM »

Quote from: delspool on March 11, 2009, 10:15:48 AM

i still havent figured out what the original owners were thinking when they built this

nice tool box

I got the same one lol.. snap-on classic 78 right? Mine is black though.

News:

Author Topic: RHMT Workshops (Read 11314 times)

90dx

junkyard racer

junkyard racer

Evans Performance

Evans Performance