:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Got video of your car doing rippers or dirty 2/3rds? post them up! (link)

Pages: [1]   Go Down

Author Topic: How likely is this a head gasket issue?  (Read 2736 times)

realAgentMurdoc

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1714
How likely is this a head gasket issue?
« on: August 12, 2009, 05:15:41 PM »
03 Civic EX

temp rises up and down.  Goes to the red and then drops back down after a while. 

not the thermostat, just changed.

Fans kick in fine.

Flushed and fluids filled to appropriate levels, after drivig about an hour or so, coolant tank gets filled with coolant  :-X

I really don't wanna do a headgasket on this s.o.b.

Any cheap easy alternatives?
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: How likely is this a head gasket issue?
« Reply #1 on: August 12, 2009, 05:26:59 PM »
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

realAgentMurdoc

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1714
Re: How likely is this a head gasket issue?
« Reply #2 on: August 12, 2009, 05:32:30 PM »
not an option for me... not my car. 

I'd never buy one of thems.
Logged

98vtec

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1076
  • try a warm glass of shut the fuck up
    • BBmoto Tuning
Re: How likely is this a head gasket issue?
« Reply #3 on: August 12, 2009, 06:45:05 PM »
flux.
Logged
xXx Performance Tuning
-- In House DynoJet
SouthEast Neptune Tuner

chris

  • Guest
Re: How likely is this a head gasket issue?
« Reply #4 on: August 12, 2009, 06:47:59 PM »
Compression test the motor



Do a quick rig job and  set the fan up to 12 volt power all the time. If it doesnt overheat with the fan on all the time it wont be a headgasket



blown Headgaskets will overheat no matter how much air you throw at them


Oh yeah bad theromstat grounds will tweak with temp readings atleast the 0bd2 and older cars did.


I dont work on the new spaceship hondas
Logged

jagojon3

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 17261
Re: How likely is this a head gasket issue?
« Reply #5 on: August 12, 2009, 06:54:04 PM »
Bleed the cooling system?
Logged

Turkey soup pancakes sir

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: How likely is this a head gasket issue?
« Reply #6 on: August 12, 2009, 07:16:14 PM »
If the resevoir is filling is it a bad rad cap?
Logged
92GSR - mild interest

fysh

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 605
Re: How likely is this a head gasket issue?
« Reply #7 on: August 12, 2009, 09:45:37 PM »
thermostat installed upside down?
Logged

spoonfedcrx

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 301
Re: How likely is this a head gasket issue?
« Reply #8 on: August 20, 2009, 07:59:09 AM »
Possible.  Ive done about 3 or 4 of these at work.  A few from bad fan switches and people driving the piss out of them overheating. 

Do a leakdown test.
Logged

Kenny Rogers

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2144
  • I was raised on the dairy, bitch
Re: How likely is this a head gasket issue?
« Reply #9 on: August 20, 2009, 07:39:42 PM »
Quote from: jagojon3 on August 12, 2009, 06:54:04 PM
Bleed the cooling system?

I had a hell of an air bubble once... sounds just like the problem you're having.  However, draining/filling completely should have fixed it.

Try parking it on an incline so the cap is the highest point and run it with the cap off.  I had to do a few heat cycles before the air got out.  However, if it really is a HG, that won't do any good  :P
Logged

Foowee

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1816
Re: How likely is this a head gasket issue?
« Reply #10 on: August 20, 2009, 10:04:40 PM »
Quote from: fysh on August 12, 2009, 09:45:37 PM
thermostat installed upside down?

this one I've seen.  Not to be confused with backwards.  The little bubble valve needs to be at the top to let air through it.
Logged
Pages: [1]   Go Up
« previous next »