Topic: Evans' N/A build thread. Homeless style build. I live in a van (Read 8700 times)

Evan · « **on:** September 06, 2009, 11:35:31 PM »

so a couple weeks ago i decided to pull the 307 and rebuild it to give it some ok power. I have all the parts already and have completly blown my 1000 dollar budget out of the water.

Parts im using
Comp cams 262 with matching head hardware.

305 4 barrel heads. 1.84 intake 1.5 exhaust. Edelbrock torker.(i had a performer but it was too chewed up to use. so i am temporarily using the torker) holley 600 Hei alittle chrome all that good shit.

once i got it stripped down i found out its been recently rebuilt(score) then i cleaned it and painted it midnight black

after alittle cleaning i noticed a stamping on the pistons

more good news for me:)

jump forward a couple days and this is where im at right now.

Towdogg · « **Reply #1 on:** September 08, 2009, 09:23:28 PM »

Where's the boost!

onlyflash944 · « **Reply #2 on:** September 08, 2009, 09:47:15 PM »

you left your sifter on the carb

Joseph Davis · « **Reply #3 on:** September 09, 2009, 12:36:58 AM »

If I ever find your car I'm peeing in your carb funnel.

patsmx5 · « **Reply #4 on:** September 09, 2009, 10:06:23 AM »

Chrome tin valve covers = chrome thermostat housing = leakcity

Teg2boo · « **Reply #5 on:** September 09, 2009, 01:13:01 PM »

Quote from: Joseph Davis on September 09, 2009, 12:36:58 AM

If I ever find your car I'm peeing in your carb funnel.

My father has the same, it looks funny

Joseph Davis · « **Reply #6 on:** September 09, 2009, 02:06:20 PM »

Quote from: Teg2boo on September 09, 2009, 01:13:01 PM

Quote from: Joseph Davis on September 09, 2009, 12:36:58 AM
If I ever find your car I'm peeing in your carb funnel.

My father has the same, it looks funny

Pee in his carb funnel?

ratcityrex · « **Reply #7 on:** September 09, 2009, 02:09:41 PM »

Quote from: patsmx5 on September 09, 2009, 10:06:23 AM

Chrome tin valve covers = chrome thermostat housing = leakcity

DOnt forget to get the chrome timing chain cover too!

Teg2boo · « **Reply #8 on:** September 09, 2009, 04:06:03 PM »

Quote from: Joseph Davis on September 09, 2009, 02:06:20 PM

Quote from: Teg2boo on September 09, 2009, 01:13:01 PM
Quote from: Joseph Davis on September 09, 2009, 12:36:58 AM
If I ever find your car I'm peeing in your carb funnel.

My father has the same, it looks funny

Pee in his carb funnel?

No, only carb funnel. Without pee. I'll post pics of his car this weekend. I can't wait to see this damn car on the road...

He has this engine into it

V8 Cavalier Burnout

Sorry for thread jack

MantisX · « **Reply #9 on:** September 09, 2009, 04:31:56 PM »

Where the fucks the turbo/porn?

AJxr · « **Reply #10 on:** September 09, 2009, 04:48:34 PM »

yeah... n/a WTF?

Joseph Davis · « **Reply #11 on:** September 10, 2009, 08:40:39 PM »

Can we move this thread again? It clearly doesn't belong in Tech.

Conceptz-X · « **Reply #12 on:** September 10, 2009, 09:09:55 PM »

You sir have resurrected some shit to live another day at quite a price...

I'm with Joey, Pissing in your funnel

bouncinofftherevlimiter · « **Reply #13 on:** September 10, 2009, 10:33:39 PM »

makes me sad i dont ever get my nova out...

maybe next year, i miss the race gas 650+ hp slut... and the total lack of traction from the tiny 14s...

glustic · « **Reply #14 on:** September 10, 2009, 10:48:52 PM »

Quote from: Towdogg on September 08, 2009, 09:23:28 PM

Where's the boost!

snm95ls · « **Reply #15 on:** September 11, 2009, 12:46:37 AM »

Why are you sinking money into a 307?

Cool none the less, but I would pull the crank and rods and stuff them into a 350 block with new pistons.

ApexSilver06MR · « **Reply #16 on:** September 11, 2009, 12:26:03 PM »

Quote from: glustic on September 10, 2009, 10:48:52 PM

Quote from: Towdogg on September 08, 2009, 09:23:28 PM
Where's the boost???

Conceptz-X · « **Reply #17 on:** September 11, 2009, 06:54:28 PM »

Quote from: ApexSilver06MR on September 11, 2009, 12:26:03 PM

Quote from: glustic on September 10, 2009, 10:48:52 PM
Quote from: Towdogg on September 08, 2009, 09:23:28 PM
Where's the boost???

if you had to build a N/A, it should have been badass. Instead you went against the recomendations of the community and embarassed yourself

Loki · « **Reply #18 on:** September 11, 2009, 08:00:29 PM »

I want a Nova

brine04 · « **Reply #19 on:** September 11, 2009, 10:49:11 PM »

Quote from: 2baller4u on September 11, 2009, 10:46:38 PM

I thought when i joined up the other day that this said real homemade turbo. Not i want to be a V8 faggot.. My K swapped hatch would eat this piece of shit anyday of the week.. what a fucking tool

piss off faggot

90boostdaccord · « **Reply #20 on:** September 11, 2009, 10:54:35 PM »

Quote from: 2baller4u on September 11, 2009, 10:46:38 PM

I thought when i joined up the other day that this said real homemade turbo. Not i want to be a V8 faggot.. My K swapped hatch would eat this piece of shit anyday of the week.. what a fucking tool

says the guy on a broke dick website with no intro post and a "k series" motor....weaksauce

i'll beat up your mothers vulva, shut the fuck up dickcheese

90boostdaccord · « **Reply #21 on:** September 11, 2009, 11:01:38 PM »

Quote from: 2baller4u on September 11, 2009, 11:00:15 PM

i dont need an intro when my k swap cost more than your whole fucking car.. Ask you mom if her throat is still sore from swallowing this 10" dick.. you fucking poser

blah blah blah, i have money, yet i'm surfing the brokest site on the web. har har har. my mom said deep throating you was like swallowing a pack of tic tacs

Evan · « **Reply #22 on:** September 19, 2009, 03:37:22 AM »

Quote from: snm95ls on September 11, 2009, 12:46:37 AM

Why are you sinking money into a 307?

Cool none the less, but I would pull the crank and rods and stuff them into a 350 block with new pistons.

why not? its the same as any other sbc. I could of spent 500 on a old stock 350 i knew nothing about and gone from there. if i did that i wouldnt have a finished short block yet.

Quote from: Conceptz-X on September 10, 2009, 09:09:55 PM

You sir have resurrected some shit to live another day at quite a price...

I'm with Joey, Pissing in your funnel

940 bucks...ehh not a whole lot.+ i can put most of this stuff on another sbc should i choose so.

Quote from: patsmx5 on September 09, 2009, 10:06:23 AM

Chrome tin valve covers = chrome thermostat housing = leakcity

Not really. that housing have a rubber o ring to stop from leaks and i know how to actually put on a gasket

Quote from: Joseph Davis on September 09, 2009, 12:36:58 AM

If I ever find your car I'm peeing in your carb funnel.

I took it off. My co workers are all hotrodders ( i work at a hot rod shop) and they put it on.

and to the faggot with a k swap motor. Though i may be N/A there is no site rules as to how many cylinders you can and cannot have. get your ricer ass ego out of here.

Evan · « **Reply #23 on:** September 19, 2009, 03:40:25 AM »

Quote from: Conceptz-X on September 11, 2009, 06:54:28 PM

if you had to build a N/A, it should have been badass. Instead you went against the recomendations of the community and embarassed yourself

It's only embarrassing if you give a shit

snm95ls · « **Reply #24 on:** September 19, 2009, 04:54:36 AM »

Quote from: Evan on September 19, 2009, 03:37:22 AM

why not? its the same as any other sbc. I could of spent 500 on a old stock 350 i knew nothing about and gone from there. if i did that i wouldnt have a finished short block yet.

Not all SBCs are created equal.

307 blocks historically have soft cylinder walls. I wasn't saying you should build a 350 like every other jackass, rather, build a large journal 327 for dirt cheap is all.

307 crank plus 350 block = 327.

Joseph Davis · « **Reply #25 on:** September 19, 2009, 05:07:45 AM »

Quote from: Evan on September 19, 2009, 03:40:25 AM

Quote from: Conceptz-X on September 11, 2009, 06:54:28 PM

if you had to build a N/A, it should have been badass. Instead you went against the recomendations of the community and embarassed yourself

It's only embarrassing if you give a shit

I'll give you a shit - down your carb funnel.

Evan · « **Reply #26 on:** September 19, 2009, 05:18:36 AM »

Quote from: snm95ls on September 19, 2009, 04:54:36 AM

Quote from: Evan on September 19, 2009, 03:37:22 AM
why not? its the same as any other sbc. I could of spent 500 on a old stock 350 i knew nothing about and gone from there. if i did that i wouldnt have a finished short block yet.

Not all SBCs are created equal.

307 blocks historically have soft cylinder walls. I wasn't saying you should build a 350 like every other jackass, rather, build a large journal 327 for dirt cheap is all.

307 crank plus 350 block = 327.

thats a urban legend. there nickel content is about the same as any other other sbc. some even had higher nickel content.

and I plan on doing another build soon. this was just a cheap crap set up to give some nice street able power and enough to shut down some of the cars at my high-school

snm95ls · « **Reply #27 on:** September 19, 2009, 05:37:23 AM »

Ah, good deal then.

patsmx5 · « **Reply #28 on:** September 19, 2009, 10:14:33 AM »

If you knew anything about how to do gaskets you wouldn't put a rubber gasket on stamped tin dead fucking smooth chrome plated valve covers. Fail, sorry. Your shit will leak, there is no doubt.

snm95ls · « **Reply #29 on:** September 19, 2009, 03:21:09 PM »

Quote from: patsmx5 on September 19, 2009, 10:14:33 AM

If you knew anything about how to do gaskets you wouldn't put a rubber gasket on stamped tin dead fucking smooth chrome plated valve covers. Fail, sorry. Your shit will leak, there is no doubt.

Like cork would be any better.

ROFL.

News:

Author Topic: Evans' N/A build thread. Homeless style build. I live in a van (Read 8700 times)