Topic: RHMT's official gun thread (Read 31494 times)

random-strike · « **Reply #90 on:** March 18, 2009, 12:46:54 AM »

Quote from: bigdaddyvtec on March 18, 2009, 12:36:31 AM

fuck.... Ima hold out, but not for much longer... Ive been reading some cabellas scam people are doing with gift cards.. Im about to try it

cabellas is way expensive too. its over 300 for 1000.

i'm not going to shoot these. i have about 1500 and i'd like to keep at least 1000 at all times.

i should've refi'd my house before bongo got elected and bought 50k worth of 7.62x39mmm and resold it.

i also bought 6 30 rnd hungarian mags, and i want to get a com bloc mag vest that holds at least 8

Corey · « **Reply #91 on:** March 18, 2009, 12:49:28 AM »

1120rd cases of surplus 7.62 brass case on 10rd strippers for $301

http://www.samcoglobal.com/index.html

bigdaddyvtec · « **Reply #92 on:** March 18, 2009, 01:00:28 AM »

Shit Ive only got like 400 - 450

random-strike · « **Reply #93 on:** March 18, 2009, 01:44:12 AM »

Quote from: CoreyR on March 18, 2009, 12:49:28 AM

1120rd cases of surplus 7.62 brass case on 10rd strippers for $301

http://www.samcoglobal.com/index.html

i've shot a lot of the yugo stuff and i get really bad trigger slap with it.

if i could get a different trigger mech i would totally get those instead of wolf

the yugo mil stuff is much more powerful

bigdaddyvtec · « **Reply #94 on:** March 18, 2009, 01:46:31 AM »

what trigger grolup??? the G2 tapco iks awsome abd us compliant

Corey · « **Reply #95 on:** March 18, 2009, 02:01:41 AM »

Quote from: random-strike on March 18, 2009, 01:44:12 AM

Quote from: CoreyR on March 18, 2009, 12:49:28 AM
1120rd cases of surplus 7.62 brass case on 10rd strippers for $301

http://www.samcoglobal.com/index.html

i've shot a lot of the yugo stuff and i get really bad trigger slap with it.

if i could get a different trigger mech i would totally get those instead of wolf

the yugo mil stuff is much more powerful

i bought some of this local and shot it through my VZ and it was great. def more powerful then wolf stuff. only downside is its corrosive so you have to actually clean the gun/barrel everytime you shoot it.

LS1pwNzJ00 · « **Reply #96 on:** March 18, 2009, 02:05:40 AM »

i just ordered off that site corey posted. Hopefully i'll get my ammo soon. Anyone know if that ammo is reloadable?

random-strike · « **Reply #97 on:** March 18, 2009, 02:24:55 AM »

Quote from: LS1pwNzJ00 on March 18, 2009, 02:05:40 AM

i just ordered off that site corey posted. Hopefully i'll get my ammo soon. Anyone know if that ammo is reloadable?

yea it is. brass casing

Corey · « **Reply #98 on:** March 18, 2009, 02:25:28 AM »

it should be its brass cased.

crttaz · « **Reply #99 on:** March 18, 2009, 02:27:51 AM »

Just ordered another 400 rounds from www.ammunitiontogo.com

Products
------------------------------------------------------
4 x 50rds - 38 Special Speer Lawman 158gr. +P TMJ Ammo (53750) = $65.96
4 x 50rds - 40 S&W Speer Lawman 155gr. TMJ Ammo (53957) = $63.80
------------------------------------------------------
Sub-Total: $129.76
United Parcel Service (XML) (1 pkg) (UPS Ground, 2009-03-26): $17.20
Shipping Insurance: $0.65
Total: $147.61

Should get it in 10-12 days.

t_cel_t · « **Reply #100 on:** March 18, 2009, 02:36:48 AM »

Quote from: CoreyR on March 18, 2009, 12:49:28 AM

1120rd cases of surplus 7.62 brass case on 10rd strippers for $301

http://www.samcoglobal.com/index.html

thanks, just ordered

t_cel_t · « **Reply #101 on:** March 18, 2009, 02:38:07 AM »

Quote from: random-strike on March 18, 2009, 02:24:55 AM

Quote from: LS1pwNzJ00 on March 18, 2009, 02:05:40 AM
i just ordered off that site corey posted. Hopefully i'll get my ammo soon. Anyone know if that ammo is reloadable?

yea it is. brass casing

not always true, well, the one type of primer is a bitch to remove and there is only like 1 place that makes them

crttaz · « **Reply #102 on:** March 18, 2009, 02:49:58 AM »

boxer or berdan primer?

Reloadable ammo is boxer primed.

bigdaddyvtec · « **Reply #103 on:** March 18, 2009, 03:11:52 AM »

Quote from: t_cel_t on March 18, 2009, 02:36:48 AM

Quote from: CoreyR on March 18, 2009, 12:49:28 AM
1120rd cases of surplus 7.62 brass case on 10rd strippers for $301

http://www.samcoglobal.com/index.html
thanks, just ordered

Yo tambien

j.h.christ · « **Reply #104 on:** March 18, 2009, 05:02:00 AM »

thank the man upstairs i stocked up on my 7.62 nato's a few years ago... i just checked a few places for prices and about shit my pants. it's damn near 70 cents a round. fuck this shit.

QikEnuF · « **Reply #105 on:** March 18, 2009, 10:17:04 AM »

Where the F are you paying $1 a round for 54R... Also, if anyone (scott) has a lower receiver for either an AK or an AR, I need one...

Corey · « **Reply #106 on:** March 18, 2009, 11:07:00 AM »

Quote from: danwjmu on March 18, 2009, 10:45:26 AM

http://www.classicarms.us/

Bulgarian 54r. 400round can for a hundred bucks.

http://www.ammunitiontogo.com/catalog1/index.php/cName/762x54r-fmj-ammo

440 tins for $80 or 880 tins for $150. also bulgy

QikEnuF · « **Reply #107 on:** March 18, 2009, 11:20:12 AM »

It'd cost almost as much to reload lol

bigdaddyvtec · « **Reply #108 on:** March 18, 2009, 11:22:19 AM »

Quote from: j.h.christ on March 18, 2009, 05:02:00 AM

thank the man upstairs i stocked up on my 7.62 nato's a few years ago... i just checked a few places for prices and about shit my pants. it's damn near 70 cents a round. fuck this shit.

Sell me some at a rate even your mother would love...

MerkurColin · « **Reply #109 on:** March 18, 2009, 12:21:13 PM »

Rimfire, nig nogs. :somb:

bigdaddyvtec · « **Reply #110 on:** March 18, 2009, 12:49:21 PM »

Quote from: MerkurColin on March 18, 2009, 12:21:13 PM

Rimfire, nig nogs. :somb:

I wouldnt mind asn AR pistol... I mean shit, its just a shoulder rest away from a nasty nasty bitch....

QikEnuF · « **Reply #111 on:** March 18, 2009, 01:09:50 PM »

900s · « **Reply #112 on:** March 18, 2009, 03:56:08 PM »

Quote from: CoreyR on March 18, 2009, 12:49:28 AM

1120rd cases of surplus 7.62 brass case on 10rd strippers for $301

http://www.samcoglobal.com/index.html

Does that shit have the corrosive primers? I know a lot of Eastern Euro stuff does, especially Yugo...

Anyways, here's the SLR and my modest magazine collection with ching chong meow chest rig:

Also got a hex-receiver M91/30 and a 10/22. Want to pick up a PF-9 this summer for carry...

G2turbo_terror · « **Reply #113 on:** March 18, 2009, 05:08:49 PM »

Just started collecting in late '08.
Mosin Nagant 91/30
Ruger 10/22
Parts that resemble a Yugo underfolder. Not enough time to finish it.

Corey · « **Reply #114 on:** March 18, 2009, 05:15:10 PM »

Quote from: 900s on March 18, 2009, 03:56:08 PM

Quote from: CoreyR on March 18, 2009, 12:49:28 AM
1120rd cases of surplus 7.62 brass case on 10rd strippers for $301

http://www.samcoglobal.com/index.html

Does that shit have the corrosive primers? I know a lot of Eastern Euro stuff does, especially Yugo...

Anyways, here's the SLR and my modest magazine collection with ching chong meow chest rig:

Also got a hex-receiver M91/30 and a 10/22. Want to pick up a PF-9 this summer for carry...

yes its corrosive. probably 95% of surplus ammo is corrosive.

bigdaddyvtec · « **Reply #115 on:** March 18, 2009, 05:45:30 PM »

I clean the shit out of my guns WHENEVER I shoot them... The logic that an AK doesnt need to be is fucking retarded....

QikEnuF · « **Reply #116 on:** March 18, 2009, 05:47:55 PM »

Quote from: bigdaddyvtec on March 18, 2009, 05:45:30 PM

I clean the shit out of my guns WHENEVER I shoot them... The logic that an AK doesnt need to be is fucking retarded....

I'm glad there are sensible people here..

b20x · « **Reply #117 on:** March 18, 2009, 08:07:51 PM »

All I have is a couple Rock Island 1911 http://www.armscor.net/ 45s. Never had a jam, failure to feed blah blah and I got 3k of ammo to go thru yet. They make a nickel 1911 .45 and it will be my next gun. I paid $399 for my GI and $454 for my Tactical.

LS1pwNzJ00 · « **Reply #118 on:** March 18, 2009, 08:21:07 PM »

Quote from: 900s on March 18, 2009, 03:56:08 PM

Quote from: CoreyR on March 18, 2009, 12:49:28 AM
1120rd cases of surplus 7.62 brass case on 10rd strippers for $301

http://www.samcoglobal.com/index.html

Does that shit have the corrosive primers? I know a lot of Eastern Euro stuff does, especially Yugo...

Anyways, here's the SLR and my modest magazine collection with ching chong meow chest rig:

Also got a hex-receiver M91/30 and a 10/22. Want to pick up a PF-9 this summer for carry...

milled recievers are teh sex.

Quote from: G2turbo_terror on March 18, 2009, 05:08:49 PM

Just started collecting in late '08.
Mosin Nagant 91/30
Ruger 10/22
Parts that resemble a Yugo underfolder. Not enough time to finish it.

Have fun with that yugo, milled recievers are expensive and threaded barrels are a bitch to re-install. You should bend a flat, grind down the cut reciever stubs and stick the stubs inside the flat and weld them there, best option IMO

BTW is your bore a sewer pipe? i hear theyre garbage

G2turbo_terror · « **Reply #119 on:** March 18, 2009, 09:28:19 PM »

I'm undecided as to how I'm going to finish the receiver. I have no way of accurately removing material from the trunions. I could do it like that guy in the write up; feeler gauge/drill press/grinder. According to rumor, theres a guy who sells repair blanks so that may be an easier option. Either way, I really don't want to remove the barrel.

As for the barrel. I got really lucky, the riffling looks good, muzzle eats a bullet 2/3 of the way.

How are you identifying/labeling/personalizing yours? Thats something I'm still unclear on.

News:

Author Topic: RHMT's official gun thread (Read 31494 times)

QikEnuF

QikEnuF

QikEnuF

QikEnuF