Topic: Scrutinize my build dammit (Read 17447 times)

Panis · « **on:** September 21, 2009, 04:07:35 AM »

Goal: 300hp

d16z6 vitara 75mm TT build.

No I haven't clearanced anything yet. That is still to come but I want expert opinions before I amass other misc shit.

What I have so far.
Ycp pistons
Hastings rings
acl main, rod and king thrust washers.

Now the questions...

1- ARP headstuds necessary, can I reuuse my stockers? Read mixed opinions on this.

2- do I HAVE to have 650cc inj to make this power safely? I used the bsfc formula and came up with that being the ideal inj size.

3- xeno pump good or no? Getting mixed reviews on that too.

I'm trying to do this build for cheap, I know a guy that claims to make 350hp on dsm 450's but it just doesn't compute... Any tips are greatly appreciated. If I think of other shit I'll post up.

Oh yea

4- ideal ring gap for 1st and 2nd and oil ring for this application?

Panis · « **Reply #1 on:** September 21, 2009, 04:08:38 AM »

Don't think of it as spoon feeding, more like adding content to rHMT

chris · « **Reply #2 on:** September 21, 2009, 04:10:16 AM »

Ungodly amount of fuel pressure can make injectors go a long way

Panis · « **Reply #3 on:** September 21, 2009, 04:59:23 AM »

Quote from: chris M on September 21, 2009, 04:10:16 AM

Ungodly amount of fuel pressure can make injectors go a long way

You've got my attention... I'm going to be spending $500 for the chip and tune anyways ... think the xeno pump could handle those pressures say I went with the xeno pump and his 440cc injs, would it be feasible to churn out as close as possible to 300hp "safely" ?

chris · « **Reply #4 on:** September 21, 2009, 05:06:24 AM »

i dont use those pumps

Panis · « **Reply #5 on:** September 21, 2009, 08:23:38 AM »

Quote from: chris M on September 21, 2009, 05:06:24 AM

i dont use those pumps

you mean you have no experience with them or a bad experience?

92CXyD · « **Reply #6 on:** September 21, 2009, 09:21:41 AM »

No he is saying if you get the xeno pump you'll be pissed that you overpaid for a CDM pump.
Ebay has them for $65usd shipped:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220479564776&ssPageName=STRK:MEWAX:IT

I use stock ring gap but on the loose side.

Headstuds = yes

650cc =yes I use 780cc

And doing this build cheap is what rHMT is all about.

junkyard racer · « **Reply #7 on:** September 21, 2009, 12:29:08 PM »

from my experiences, that xeno pump is a huge pile of shit.

my thought on the injectors, its better to have and not need than to need and not have.

d112crzy · « **Reply #8 on:** September 21, 2009, 12:43:20 PM »

Glad I sold mine for more than I bought it for. lol I had it sitting for over a year.

ratcityrex · « **Reply #9 on:** September 21, 2009, 12:46:53 PM »

Ok for the pump, i would just spend the extra 35and get the hp walbro. Ive heard of alot of people (1 of them i know personaly) have a problem with them not sucking from the bottom of the tank. So you always have to have a 1/2 tank of it will spit and sputter. For injectors i would look around for a used set of 550cc+ sized injectors. I would shoot for 650 or larger but 550s will get you right on the line of your power. As for head studs, check extreampsi.com they have them for $100ish if it was my car, yes i would get them. Most people run to much timing and blow out hg's. If your head bolts are torque to yeald style (they have the funky drillbit look to them) then no, throw them in the trash and get new bolts, or studs. If they look like a regular bolt, fuck it, use them i reused mine like 3 times before i said fuck it and went with studs.

ApexSilver06MR · « **Reply #10 on:** September 21, 2009, 01:29:48 PM »

lightning motorsports for headstuds. use the coupon code from HT for free shipping.

you never know. you might get lucky and get 2 sets for the price of 1

Tim · « **Reply #11 on:** September 21, 2009, 01:33:43 PM »

Quote from: ratcityrex on September 21, 2009, 12:46:53 PM

Ok for the pump, i would just spend the extra 35and get the hp walbro. Ive heard of alot of people (1 of them i know personaly) have a problem with them not sucking from the bottom of the tank. So you always have to have a 1/2 tank of it will spit and sputter.

I bought a 'walbro' off of ebay who knows if it was chinese (lowest price shipped). It was supposed to be for my car but if I would have connected it up with the supplied parts it would have run dry way early. You need to use your noggin and compare the pickup placement of the new pump to the old one you are pulling out. I had to do some ghetto modifying to get mine to have the same pickup placement but now my low fuel light still works.

OR I'm talking out my ass and the chinese pumps are so shitty they suck fuel from the bottom seam instead of the bottom nipple from leaks and thus will run dry at the bottom of the pump reguardless of pickup placement. But if the assembly is that shitty I doubt it would seal on the pressure end either.

brine04 · « **Reply #12 on:** September 21, 2009, 01:50:47 PM »

Quote from: ApexSilver06MR on September 21, 2009, 01:29:48 PM

lightning motorsports for headstuds. use the coupon code from HT for free shipping.

you never know. you might get lucky and get 2 sets for the price of 1

get a walbro from lightning too.

chris · « **Reply #13 on:** September 21, 2009, 03:24:22 PM »

Inline fuel pump

Foowee · « **Reply #14 on:** September 21, 2009, 03:44:39 PM »

I didn't need to file the rings on my vitara build. The numbers .022"-.024" stand out in my head. I used the hastings rings supplied by fjt...

You will want looser than stock ring gaps. More power=more thermal load=more expansion...

Towdogg · « **Reply #15 on:** September 21, 2009, 04:10:06 PM »

Fuck XENOCRON

widebody93 · « **Reply #16 on:** September 22, 2009, 12:20:07 AM »

Quote from: Towdogg on September 21, 2009, 04:10:06 PM

Fuck XENOCRON

Winner

And true story we all should speak any time his name is brought up. AKA Chris Harris

Panis · « **Reply #17 on:** September 22, 2009, 04:58:33 AM »

Damn wats with the hatred towards xeno? What did I miss?

90boostdaccord · « **Reply #18 on:** September 22, 2009, 05:46:11 AM »

Quote from: chris M on September 21, 2009, 05:06:24 AM

i dont use those pumps

Quote from: Panis on September 22, 2009, 04:58:33 AM

Damn wats with the hatred towards xeno? What did I miss?

did you not realize this is an entirely new website?

chris · « **Reply #19 on:** September 22, 2009, 06:39:43 AM »

xeno sold hmt to corporate company that uses your personal info for spam. All admin/staff/contributers to the site were banned so the agenda of the corporate company to continue to achieve personal information is continued

You do know your on rhmt. If you would like spam sent to you and your email/passwords sold to africa then please go back to hmt and join the fools.

This is the last of the greats. Follow the herd of blind and weak and leave us at peace.

Towdogg · « **Reply #20 on:** September 22, 2009, 08:37:35 AM »

JoshMO I should have never told you where these hardcore pipehitting muther fuckers moved to ........ Get it together or get the fuck out...

Panis · « **Reply #21 on:** September 22, 2009, 08:52:25 AM »

Fuck your narrow minded train of thought, towdogg. How the fuck am I suppose to know what happened on the old site unless I ask. Maybe you're the sheep blindly following others because you obviously can't formulate a thought of your own that is based on logic and reason.

Panis · « **Reply #22 on:** September 22, 2009, 08:55:24 AM »

On a side note thanks for clearing that up. Figures he would sell it out like that.

ratcityrex · « **Reply #23 on:** September 22, 2009, 10:48:00 AM »

http://www.realhomemadeturbo.com/forum/index.php?topic=17.0

Towdogg · « **Reply #24 on:** September 22, 2009, 04:28:58 PM »

Quote from: Panis on September 22, 2009, 08:52:25 AM

Fuck your narrow minded train of thought, towdogg. How the fuck am I suppose to know what happened on the old site unless I ask. Maybe you're the sheep blindly following others because you obviously can't formulate a thought of your own that is based on logic and reason.

K nigga! Your the one who's late not me....... I was here within a few days...... It took you monthes.....

You still are a member of OHMT............. I was banned within minutes of the new Rick P. ownership.... Fuck you Punk.........

chris · « **Reply #25 on:** September 22, 2009, 04:30:19 PM »

inline pump

Panis · « **Reply #26 on:** September 22, 2009, 06:57:07 PM »

Hard to get banned when you never log on

. I guess its time revisit ohmt and cause some chaos.

Panis · « **Reply #27 on:** September 22, 2009, 07:10:02 PM »

Not sure if you guys will even be able to see my post....

http://www.homemadeturbo.com/forum/f3/f6/110407-d16z6-vitara-turbo-build.html#post1288085

A little on the weak side, but maybe we can convert a few....

I'll try to post up a screen shot or something.

Robb · « **Reply #28 on:** September 22, 2009, 09:00:43 PM »

I think thats a borderline banning offense, linking to ohmt... Your giving rickp traffic.

FUCK THE FIVE SECOND RULE!!!

chris · « **Reply #29 on:** September 22, 2009, 09:05:11 PM »

Unless you have tuner toy rods in your hands you cant get them. They went out of business and declared bankruptcy sir

News:

Author Topic: Scrutinize my build dammit (Read 17447 times)

chris

chris

junkyard racer

chris

chris

chris

chris