Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Pootie]

i thought you got that eg coupe that was caged?  did i miss a big update some where ? fuck me idk whats going on lol

Ideally what i wanted to do was stay away from EKs because of that driver side mount. Because it sucks huge balls!! So i was looking for a Teg or EG civic (2 door and possible a bubble)

 
After seeing the coupe in person .I didn't too like the layout of the cage. (it would pass, but... ) It still is an option.!

Another Option is a Bubble in Li , Its a shell . The kid wants $600.. It's bone stock with a blown SOHC.

Another option is a 98 GSR shell that i could get for labor of doing a swap for the owner.

I'm not too set yet.. But next week i'm going to take a drive down to Ken's Kustom to get a 10 point cromoly cage and some extra pieces for the chute bracket.

 But i'm running out of time.... I need a car caged by Feb. (and i have till next week to figure out what chassis i need the cage for b4 i head out to Ken's.

[Pootie]

i also picked this up used on the "cheap".
Inline Pro intake manifold,Precision 1600cc injectors (injector matched and flow tested), Inline Pro high-volume fuel rail with -6 and -10AN ends.

[bigdaddyvtec]

 
After seeing the coupe in person .I didn't too like the layout of the cage. (it would pass, but... ) It still is an option.!

Hahahaha ya I told ya it looked suspect.... very poorly laid out in the front. Not exactly as protective as it could have been either.


Good call.

 

[crxvtec91]

Still have the ek?

[Pootie]

Still have the ek?

 I still have the shell. (i have 4 buyers, Asking $2000 firm if anyone intrested . Full shell with suspension, and a lot of goodies).

But i had to wait 2 weeks for NJ to send me a copy of the title that i lost during a move 3 years ago.

So it should be here this week, and the EK is gone!!

Everything else is gone.. down to the nutz n bolts... :yes:

 I was a lil suprised. It was all sold in about a week time.

[crxvtec91]

Hum nice, well I have a 95 cx, its my DD; but I been thinking about selling it.....

[Joseph Davis]

Sell those 1600's.  I really doubt they are flow matched well enough across the entire operating band to keep them from running like ragged ass.

[bigdaddyvtec]

teh 1600 conversation rings a bell... LOL.

[Pootie]

Hum nice, well I have a 95 cx, its my DD; but I been thinking about selling it.....

Orlyy!!

 how much. I like options!!

PM pix if possible

[Pootie]

Sell those 1600's.  I really doubt they are flow matched well enough across the entire operating band to keep them from running like ragged ass.

 They are Matt Keller's old injectors on his B-seriese.. (they were used for 8-10 passes then the car sat for about a year. Then the car was parted out. I was told they were matched with 4 other sets to get 4 veryy similiar flowing injectors, they were also tested on 1-15-10).. I will have them tested again b4 i use them.  These injectors came as part of the combo. So i consider them freebies. If they work then 

If that dosent pan out . i'll have to look into another option (the IDs won't support Q16  )

[Joseph Davis]

Flow matched at peak, or also at very small injector openings?

Why don't Bosch injectors work with Q16?  That doesn't make sense.

[crxvtec91]

Hum nice, well I have a 95 cx, its my DD; but I been thinking about selling it.....

Orlyy!!

 how much. I like options!!

PM pix if possible

Not sure yet how much. I also don't have pic's right now. Its a Bone stock 95 cx that sat for 6-8 years and I put it together about 6 months back. Would come with Gc/kyb gr2's.

[Pootie]

Flow matched at peak, or also at very small injector openings?

Why don't Bosch injectors work with Q16?  That doesn't make sense.

 I think it's something in the properties of Q16..

 see post #8
http://honda-tech.com/showthread.php?t=2712073

i heard the 1000's do. But not the 2000's (which is what i'd go with)

 From what i have heard ID has been trying to work around it. In the mean time the 1600's will do. I will be testing the car for the beginning of the season on a lott less power.

teh 1600 conversation rings a bell... LOL.

What did people do b4 the IDs?

[Pootie]

Hum nice, well I have a 95 cx, its my DD; but I been thinking about selling it.....

Orlyy!!

 how much. I like options!!

PM pix if possible

Not sure yet how much. I also don't have pic's right now. Its a Bone stock 95 cx that sat for 6-8 years and I put it together about 6 months back. Would come with Gc/kyb gr2's.

 :yes:

[glustic]

How about a 99 ex?

[crxvtec91]

Hum nice, well I have a 95 cx, its my DD; but I been thinking about selling it.....

Orlyy!!

 how much. I like options!!

PM pix if possible

Not sure yet how much. I also don't have pic's right now. Its a Bone stock 95 cx that sat for 6-8 years and I put it together about 6 months back. Would come with Gc/kyb gr2's.

 :yes:

Pootie your welcome to come see it. I am only about 20min from the GW. Im in Paterson.

[Pootie]

How about a 99 ex?

Trying to stay away from that pesky EK driver side mount.

[glustic]

How about a 99 ex?

Trying to stay away from that pesky EK driver side mount.

Haha.

[Pootie]

lmaoooooooooooo
 thats one way!!

[boosted 00 black si]

Hum nice, well I have a 95 cx, its my DD; but I been thinking about selling it.....

Orlyy!!

 how much. I like options!!

PM pix if possible

Not sure yet how much. I also don't have pic's right now. Its a Bone stock 95 cx that sat for 6-8 years and I put it together about 6 months back. Would come with Gc/kyb gr2's.

is that single motor i sold u steve?

[Joseph Davis]

Flow matched at peak, or also at very small injector openings?

Why don't Bosch injectors work with Q16?  That doesn't make sense.

 I think it's something in the properties of Q16..

 see post #8
http://honda-tech.com/showthread.php?t=2712073

i heard the 1000's do. But not the 2000's (which is what i'd go with)

/
/
/
Post #8 is illogical.  There is MBTE in pumpgas.  What?/
/

teh 1600 conversation rings a bell... LOL.

What did people do b4 the IDs?
[/quote]/
/
Run the idle and part throttle super rich and live with the bucking and jerking.

[crxvtec91]

Hum nice, well I have a 95 cx, its my DD; but I been thinking about selling it.....

Orlyy!!

 how much. I like options!!

PM pix if possible

Not sure yet how much. I also don't have pic's right now. Its a Bone stock 95 cx that sat for 6-8 years and I put it together about 6 months back. Would come with Gc/kyb gr2's.

is that single motor i sold u steve?

Yup

[boosted 00 black si]

i also picked this up used on the "cheap".
Inline Pro intake manifold,Precision 1600cc injectors (injector matched and flow tested), Inline Pro high-volume fuel rail with -6 and -8AN ends.

this is pimp pootie  .i just got my sheet metal intake manifold in last week 

[Pootie]

Manifold is hereeee!! ;D

 I have to pick it up from the shop on Sat.

 But in the mean time,, This a pic of an identical manifold i poached for your viewing pleasure.

[dvst8r]

Manifold is hereeee!! ;D

 I have to pick it up from the shop on Sat.

 But in the mean time,, This a pic of an identical manifold i poached for your viewing pleasure.

I sure hope that is just the picture, as the turbo flange looks warped to fuck. 

[ratcityrex]

If you look, the flange is straight, and the gasket is twisted, I thought the same thing when I looked at it too.

[Pootie]

If you look, the flange is straight, and the gasket is twisted, I thought the same thing when I looked at it too.

[glustic]

Sick as fuck manifold, wish I could be that baller 

[boosted 00 black si]

nice i like

[Pootie]

Flow matched at peak, or also at very small injector openings?

Why don't Bosch injectors work with Q16?  That doesn't make sense.

 I think it's something in the properties of Q16..

 see post #8
http://honda-tech.com/showthread.php?t=2712073

i heard the 1000's do. But not the 2000's (which is what i'd go with)

/
/
/
Post #8 is illogical.  There is MBTE in pumpgas.  What?/
/

teh 1600 conversation rings a bell... LOL.

What did people do b4 the IDs?

/
/
Run the idle and part throttle super rich and live with the bucking and jerking.
[/quote]

why do they suggest against using them with oxygenated fuels ?

The valve/seal swells restricting flow.