Topic: Flux to Gas Mig (Read 7095 times)

rudebwoy · « **on:** January 04, 2010, 04:36:09 PM »

I have a flux mig welder I am tired of it, is it possible to convert it to a gas mig?

HiProfile · « **Reply #1 on:** January 04, 2010, 04:59:59 PM »

If your flux welder was intended for an upgrade kit, it will work fine.

MIG conversion kits usually come with a regulator for the bottle, feed line, solenoid, and new gun/line to flow the gas.

Ravage70 · « **Reply #2 on:** January 04, 2010, 06:11:38 PM »

flux works awesome on rusty exhaust pipes
mine has paid for itself 10 times over.
And besides if what your welding on is clean the weld comes out clean also

rudebwoy · « **Reply #3 on:** January 04, 2010, 07:26:40 PM »

I don't like the booger welds, its not consistent, I only get good results on thin metal if I don't burn through it. when I use a gas welder I always get good results, as you know I like my stuff looking good, plus all metal on my setup is stainless steel or aluminum.

where can I buy the conversion kit? its a easy mig 125

civiceggturbo · « **Reply #4 on:** January 06, 2010, 05:06:05 AM »

if your fluxcore mig is anything like a hf fluxcore mig its ac......so you would have to convert it to dc

rudebwoy · « **Reply #5 on:** January 08, 2010, 06:57:38 PM »

dont know much about it, but I need a better one.

News:

Author Topic: Flux to Gas Mig (Read 7095 times)

rudebwoy

Flux to Gas Mig

HiProfile

Re: Flux to Gas Mig

Ravage70

Re: Flux to Gas Mig

rudebwoy

Re: Flux to Gas Mig

civiceggturbo

Re: Flux to Gas Mig

rudebwoy

Re: Flux to Gas Mig