Topic: Towdoggs car/project Lots of pics! (Read 31909 times)

Towdogg · « **on:** March 11, 2009, 01:08:26 AM »

This is my ride!

94 EX
Z6 block and head
75mm Vitaras and Tuner Toys rods
Acl bearings
All new seals
Napa oil and water pump
Stock head
Evansperformance .57 trim turbo
.063 reducer for oil feed
Steel braided oil lines
Ex/Si tranny
Junk XTD clutch
Crome Street tuned by illpooh (SOON)
440cc injectors
2.5bar moto mapp
CDM wastegate
CDM mani
2.5 Charge pipes that need redoing
2.5 Full exhaust

I am sure that I am forgetting something!

What kind of power should I be making with this set up? (Need bigger injectors)

This picture has the small turbo still....

Posted up with Rosarios Old hatch

Phat fives

Old Days

lilpooh21186 · « **Reply #1 on:** March 11, 2009, 01:15:15 AM »

So fresh and so clean clean my street tunes break trannys :somb: style

Towdogg · « **Reply #2 on:** March 11, 2009, 01:18:25 AM »

Its OK!

I have 5 in my basement!

Lets do this!

lilpooh21186 · « **Reply #3 on:** March 11, 2009, 01:19:57 AM »

lol hopefully sat night dep on weather BTW 300 hp 210 Tq

DreaMeR · « **Reply #4 on:** March 11, 2009, 01:23:25 AM »

pretty nice car, ripper vids?

lilpooh21186 · « **Reply #5 on:** March 11, 2009, 01:26:15 AM »

Quote from: DreaMeR on March 11, 2009, 01:23:25 AM

ripper vids

:yes: its a d-series only thing its ripping is that long ass driver side axle :yes:

Towdogg · « **Reply #6 on:** March 11, 2009, 01:30:18 AM »

Quote from: lilpooh21186 on March 11, 2009, 01:19:57 AM

lol hopefully sat night dep on weather BTW 300 hp 210 Tq

will be smoked

Quote from: DreaMeR on March 11, 2009, 01:23:25 AM

pretty nice car, ripper vids?

No tune yet so she sits in the driveway waiting!

DreaMeR · « **Reply #7 on:** March 11, 2009, 01:32:29 AM »

If you know how to launch, you wouldnt have to worry about snapping axles

Towdogg · « **Reply #8 on:** March 11, 2009, 01:34:37 AM »

Quote from: lilpooh21186 on March 11, 2009, 01:26:15 AM

Quote from: DreaMeR on March 11, 2009, 01:23:25 AM
ripper vids
:yes: its a d-series only thing its ripping is that long ass driver side axle :yes:

I'll check my purse, I might be able to slap some new axles in there..... Both sides are hurt..

lilpooh21186 · « **Reply #9 on:** March 11, 2009, 01:35:52 AM »

Quote from: DreaMeR on March 11, 2009, 01:32:29 AM

If you know how to launch, you wouldnt have to worry about snapping axles

well if you know something we all dont do a write-up on it lets get this site started.

DreaMeR · « **Reply #10 on:** March 11, 2009, 01:44:17 AM »

your talking about snapping axles, pre-load the tranny for less breakage

Towdogg · « **Reply #11 on:** March 11, 2009, 01:50:13 AM »

I think his is making an inside joke cause my axles are fucked. $:-\$

DreaMeR · « **Reply #12 on:** March 11, 2009, 01:52:47 AM »

well...then...lol Nevermind.

Towdogg · « **Reply #13 on:** March 11, 2009, 01:56:43 AM »

Quote from: DreaMeR on March 11, 2009, 01:52:47 AM

well...then...lol Nevermind.

I said I THINK.

Your bulid is looking good. But your ass needs a better camara..

DreaMeR · « **Reply #14 on:** March 11, 2009, 01:59:53 AM »

yeah, like I said in my thread, Im a broke SOB after ordering all these parts

lilpooh21186 · « **Reply #15 on:** March 11, 2009, 02:22:01 AM »

Yea i was 1/2 Joking

DreaMeR · « **Reply #16 on:** March 11, 2009, 02:24:42 AM »

lol go figure, I come out lookin like an ass

98vtec · « **Reply #17 on:** March 11, 2009, 06:49:20 PM »

looks like a car straight from HT

*runs and hides*

Towdogg · « **Reply #18 on:** March 11, 2009, 10:11:50 PM »

Quote from: 98vtec on March 11, 2009, 06:49:20 PM

looks like a car straight from HT

*runs and hides*

You better run and hide!

;D

DreaMeR · « **Reply #19 on:** March 12, 2009, 12:07:36 AM »

No it doesnt cause he actually built it himself

Rosario4124 · « **Reply #20 on:** March 12, 2009, 10:21:40 AM »

Quote from: DreaMeR on March 12, 2009, 12:07:36 AM

No it doesnt cause he actually built it himself

PWNED

DreaMeR · « **Reply #21 on:** March 12, 2009, 10:27:43 AM »

lol fuck HT

birdley42008 · « **Reply #22 on:** March 12, 2009, 10:33:37 AM »

Towdogg, pm me whenever you go to NEDW, eventually you will notice me. I cant wait to see this setup.

chris · « **Reply #23 on:** March 12, 2009, 06:43:03 PM »

If your patient you should be able to score a h1c holset on ebay for under 150 shipped.

Towdogg · « **Reply #24 on:** March 13, 2009, 12:57:53 PM »

More pics

d112crzy · « **Reply #25 on:** March 13, 2009, 02:08:05 PM »

Holy shit dude. Fix all those wires.

Towdogg · « **Reply #26 on:** March 13, 2009, 02:12:32 PM »

Quote from: d112crzy on March 13, 2009, 02:08:05 PM

Holy shit dude. Fix all those wires.

I havent cleaned up the bay yet! I'm gonna do spray on bed liner and clean up those wires soon...

I have to do better charge pipes! I don't think those will hold 20 PSI

foumer · « **Reply #27 on:** March 13, 2009, 02:31:58 PM »

nice project. Damn I miss my black coupe

n2o_2k · « **Reply #28 on:** March 13, 2009, 04:39:52 PM »

I like the way wires are running around like a chicken with no head.

lilpooh21186 · « **Reply #29 on:** March 13, 2009, 04:49:16 PM »

I cant wait to tune this mother fucker

News:

Author Topic: Towdoggs car/project Lots of pics! (Read 31909 times)

birdley42008

chris