:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: ApexSilver06MR on February 22, 2010, 03:01:03 PM

Title: shitty code 9 - Problem solved. dont borrow things from friends!
Post by: ApexSilver06MR on February 22, 2010, 03:01:03 PM
Crx. A6 block, y8 head, sohc non vtak distributor. Obd0-obd1 jumper, p28.

The car runs and feels fine in boost. This code 9 is pissing me off. Is there a way to bypass this bitch?  I might have to try a new dizzy. Shit.


ninja edit : I pulled off the wire loom and electrical tape from my distributor harness.  its fuckin pinned out wrong.  shit.  dont borrow shit from friends...
Title: Re: shitty code 9
Post by: ryan89crx on February 22, 2010, 04:50:41 PM
CYP is inside the dizzy. Either a fucked up dizzy jumper, or a shitty dizzy.

Try another one and see if it goes away.
Title: Re: shitty code 9
Post by: ApexSilver06MR on February 22, 2010, 04:56:51 PM
Crap. That's what I've bEen looking for.

I do have

1 a6 dizzy
2 y8 dizzy's


Shit. Lemme look for one.
Title: Re: shitty code 9
Post by: glustic on February 22, 2010, 05:00:56 PM
Throw y8 dizzy on and call it a day
Title: Re: shitty code 9
Post by: ApexSilver06MR on February 23, 2010, 12:54:44 AM
Quote from: glustic on February 22, 2010, 05:00:56 PM
Throw y8 dizzy on and call it a day

dummy...  with an external cyp


i just realized that im using a obd2 sohc vtak dizzy....
Title: Re: shitty code 9
Post by: chris on February 23, 2010, 01:55:10 AM
you can use obd2 dizy on obd1 cars dummy
Title: Re: shitty code 9
Post by: glustic on February 23, 2010, 02:37:55 AM
Quote from: chris M on February 23, 2010, 01:55:10 AM
you can use obd2 dizy on obd1 cars dummy

Just remember jays a flipnog
Title: Re: shitty code 9
Post by: ApexSilver06MR on February 23, 2010, 02:39:46 AM
Well that's what I was thinking.  Crank position sensor is external and on the oil pump on y8's. I remember JD saying something to me about this.
Title: Re: shitty code 9
Post by: chris on February 23, 2010, 02:51:47 AM
So you think everyone who repins obd2 dist to obd1 get code 9's?
Title: Re: shitty code 9
Post by: ApexSilver06MR on February 23, 2010, 03:23:17 AM
My original plan was to run an obd2 sohc vtec dizzy and JD said that I might be able to limp the car around but it wouldn't run right. I was just putting 2 amd 2 together and thought that y8 has an external cylinder position sensor I would throw the code.
Title: Re: shitty code 9
Post by: chris on February 23, 2010, 05:39:07 AM
If it runs fine why are you trippin then? My buddies old turbo sohc was pushing 15 pounds running a code 9 for like 3 years and mucho track times.
Title: Re: shitty code 9
Post by: ApexSilver06MR on February 23, 2010, 11:18:12 AM
im just being anal about the cel being on.  its only low rpm sputter anyways....   
Title: Re: shitty code 9
Post by: glustic on February 23, 2010, 03:43:26 PM
Quote from: ApexSilver06MR on February 23, 2010, 11:18:12 AM
i just love anal and it turns me on.     
Title: Re: shitty code 9
Post by: ApexSilver06MR on February 23, 2010, 05:10:38 PM
Quote from: glustic on February 23, 2010, 03:43:26 PM
Quote from: ApexSilver06MR on February 23, 2010, 11:18:12 AM
i just love anal Liz loves it!
Title: Re: shitty code 9
Post by: ApexSilver06MR on February 25, 2010, 01:12:21 PM
ninja edit on first post
Title: Re: shitty code 9 - Problem solved. dont borrow things from friends!
Post by: chris on February 25, 2010, 02:45:02 PM
Quote from: ApexSilver06MR on February 22, 2010, 03:01:03 PM
Crx. A6 block, y8 head, sohc non vtak distributor. Obd0-obd1 jumper, p28.

The car runs and feels fine in boost. This code 9 is pissing me off. Is there a way to bypass this bitch?  I might have to try a new dizzy. Shit.


ninja edit : I pulled off the wire loom and electrical tape from my distributor harness.  its fuckin pinned out wrong.  shit.  dont borrow shit from friends...



Dont doubt chris m  ;D.
Title: Re: shitty code 9 - Problem solved. dont borrow things from friends!
Post by: ApexSilver06MR on February 25, 2010, 03:00:47 PM
Quote from: chris M on February 25, 2010, 02:45:02 PM
Quote from: ApexSilver06MR on February 22, 2010, 03:01:03 PM
Crx. A6 block, y8 head, sohc non vtak distributor. Obd0-obd1 jumper, p28.

The car runs and feels fine in boost. This code 9 is pissing me off. Is there a way to bypass this bitch?  I might have to try a new dizzy. Shit.


ninja edit : I pulled off the wire loom and electrical tape from my distributor harness.  its fuckin pinned out wrong.  shit.  dont borrow shit from friends...



Dont doubt chris m  ;D.
Title: Re: shitty code 9 - Problem solved. dont borrow things from friends!
Post by: glustic on February 25, 2010, 03:55:55 PM
Nice, just another wiring mess. I hate those.
Title: Re: shitty code 9 - Problem solved. dont borrow things from friends!
Post by: chris on February 25, 2010, 04:28:07 PM
Bump for flip nog questioning me. Repinned d16y8 dist works on obd1 car=internet knowledgez.