:::RHMT::: Real Home Made Turbo
General Category => Forced Induction => Topic started by: ochoa on April 01, 2009, 02:02:09 AM
-
I have been collecting parts for some time now, finally got the build underway
heres the set up
1988 CRX Si
Engine
D16 ZC
Aries Pistons
Eagle Rods
ACL Bearings
ARP headstuds
Fj Gasket kit
Y8 Head
LSD Clutch Kit (rated for 385 ft lbs)
Turbo setup
Welded Egay manifold
Wrx turbo
Egay intercooler
DSM 450's
Greddy BOV
Walbro 255
LM1 wideband w/ autometer gauge
EDT traction bar kit
Goal- max out turbo and injectors then upgrade later this summer when i have more funds
all the machine work is being done by my friend at his work
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi717.photobucket.com%2Falbums%2Fww171%2Femoryochoa%2Fd8.jpg&hash=620243f63fa60aa91c78790647deccff1c67c6e0)
Before
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi717.photobucket.com%2Falbums%2Fww171%2Femoryochoa%2Fd3.jpg&hash=0ecb260ab72bf2d5c446e78cd7a2a67c9c6297d9)
After
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi717.photobucket.com%2Falbums%2Fww171%2Femoryochoa%2Fd2.jpg&hash=4016b66e5bb334d3d819f29ef6266188656c8957)
Caleb at work
and now
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi717.photobucket.com%2Falbums%2Fww171%2Femoryochoa%2Fdd.jpg&hash=8f2c6d3a433caede9ff2f6d7d0bd91b46e1b5d76)
and some milf action FTW
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi717.photobucket.com%2Falbums%2Fww171%2Femoryochoa%2Fmilf.jpg&hash=824a206858f106e3568a316253e98bdfc4235a4b)
-
pictures of the car too
-
ill get some up on friday when i go back home and have some time to work on the car
-
ill get some up on friday when i go back home and have some time to work on the car
Fucking rights you will. Buy a bigger turbo too :P
-
something like a 62mm slug
-
bout time you do this boy :somb:
-
Pics of car??
Now!
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi43.tinypic.com%2F1076hx5.jpg&hash=caf9f7c2252cb3de059eed42a651bcd6ae192b53)
just a crx
-
I have those wheels also.... ;)
They are light wheels. Mine are gloss black.
-
bad news from the machine shop, after block was honed the pistons were under spec so they need to be sent out to be coated and the pins need to be upgraded to handle more boost.... so new plans ....all out race car now i need to get a big turbo. The car is going to be painted olive drab i also have some 16'' black rota slip knockoffs im gunna rock
-
That sucks.....
-
sounds like you need a better machine shop
-
They didnt mic out the pistons before they bored it. WTF. I would have them get you a new block or sleeve it for free
-
They didnt mic out the pistons before they bored it. WTF. I would have them get you a new block or sleeve it for free
+1
-
They didnt mic out the pistons before they bored it. WTF. I would have them get you a new block or sleeve it for free
the pistons were suppossed to be .020 over which would have been all fine and dandy but... before honing the block i checked the pistons and they are only .002 over stock bore. :o and all the cylinders were tappered .002 and one cyl was out of round about .0025. no good. but the only other d block we have arould is a z6 that had been laying in the rain and basically junk. so we honed it to see what we could do and it turned out that they cleaned up ..0055 over what the pistons are....but the pistons recamended ptw is .004 so we are going to send the pistons out for coating and gain .001 so we should only be .0005 over spec. but for engines running high boost ( 30 psi +++) the piston manufacturers usually say to have a little more clearance. so the pistons will be sent out to coat asap and we'll see where that gets us. Have any of you had any problems with the wrist pins breaking???
-
How much does it cost to get them coated.
-
Thats alot of fucking coating if your trying to build the piston up.
I'd be chewin on someone's ear, machine shop, piston salesman, etc.
-
cost is 16 per piston. and i think your getting the wrong idea on the coating. we are only looking for .001. its pretty common to do. and its not the machine shops fault. we went into it knowing that it was going to be out of spec. but we cant return the pistons so we are just doing what we can do.
-
coating also helps when upper cyl lubrication is weak and helps avoid scratching. so its a win win situation. but it will set us back a little.. o well gives me some time to work on my setup ; :yes:
-
dont like like ill be able to work on mine for some time... im might be losing my DL dang but i might be able to get on Illinois court supervision for speeding tickets :) i hope
ochoa ima have to run the rex when my shit box runs so give me till 2020 haha it might run then
-
sorry i kinda or made that sound bad. when i bought the pistons the were susposed to be .20 over but the order was over the phone so they wont take them back now. so caleb is doing what he can to make them work give him a break his mom is hotter than shit
heres some more pics of the slut as it sits now in black primer
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi717.photobucket.com%2Falbums%2Fww171%2Femoryochoa%2Frex.jpg&hash=d25479d91ff74f90fe5beb3069c2f138efd44d64)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi717.photobucket.com%2Falbums%2Fww171%2Femoryochoa%2Frex2.jpg&hash=f86d5fea3a3aa8f48e58c6f3843dcfac6623c831)
-
and some milf action FTW
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi717.photobucket.com%2Falbums%2Fww171%2Femoryochoa%2Fmilf.jpg&hash=824a206858f106e3568a316253e98bdfc4235a4b)
I couldn't tell if these were older looking young chicks or younger looking old chicks. Nice :yes: The cool thing about older chicks getting plastic sugurey - they do it right. No lopsided boobs, visible scars - just awsomeness. :evil:
-
ne news on the car :somb:
-
Are you using the manifold that i sold you Ochoa?
-
pretty sure he is
-
id moff those miffs.
-
he needs a bigger turbine. mycarslow???????!!!!! your never gonna get yours done so hook him up son :P
-
boy i just called you you lil fucker i was going ask you to look @ some piston and let me know what you think
-
Any of you 3 have a boosted car runing yet? ;)
-
widebody all 3 of us are still in school ... i for one am just having for fucking around and saving for 375 to 400hp sohc non vtec ..... mine was running till a nasty boost spike
-
Any of you 3 have a boosted car runing yet? ;)
ran untill a few weeks ago....
trying to get my trans as solid as possible at the moment and rebuilding a turbo for temporary use.
-
Just asking. Didnt see everyones build posts. Stay in school you little Niglets. Get your grades.
-
caleb is gunna be rockin the bottom end and similar turbo setup that jearbear667 made 525whp on in his brown hatch and idk what that weasle dick mycarslow is trying to do
-
ochoa you lil fucker my shit will be done hopefully but july :somb:
-
ochoa you lil fucker my shit will be done hopefully but july :somb:
Build thread???? Where is it?
"And you new niggas anit shit but new niggas"
-
you two are turning into bdvt and widebody
-
They are no where near the drama nor the hype that He and I went through. Those little Niggas Dont Have Shit on a snitch NIGGER deluxe or tubby butt trans alot
Lol. .
-
yeah they are just bastard children with d series.
h22 ftw
-
Peoples choice of motors dont bother me. Just the never ending bickering of neunderthaws that are attempting to boost a motor and act like they are already making power. Any thing doubled from stock output is making power to me.
-
widebody im gather pics for my thread as i write this
-
shits mine now. :somb: -ass ditched and wants his 5.0 stang done so the crx is mine now. this will be my fun/dd/track/and hopefully go fast car haha. i will try and keep updates!
-
So whats up with this darn build.
-
waiting on some correct rings and we bought some traction bars from someone on here like 3 weeks ago and no show! emory whats up who is the user name on that shit?
i have a garret 60/63 and a 38mm wg for it need a manifold and DP
i want to drive this car!
-
it's been like a month but they say he'll come thru
http://www.realhomemadeturbo.com/forum/index.php?topic=1811.0 (http://www.realhomemadeturbo.com/forum/index.php?topic=1811.0)
-
nice thanks emory.
-
gl with that jeery what did you end up buying for rings?
i have to wait till next week befor i buy more (have to see what going on with court)
-
prolly just going to leave it loose in the std bore for now and when it fucked up buy 20 over pistons/rings.
hard to work on 3-4 cars at once
5.0
crx
my eg
lude. and ryans Si will be needing work sometime soon
-
don't forget what requires the most work of all ur DSM ;D
-
oh yea the the wannabee vr4 has to get its tranny back in.. fuck..
YOU
-
hahaha nice
-
you ever get your bars yet?
-
I see no progress
or mom tits
AND I LOVE ME SOME MILFS
-
HAHA the engine will be back this weekend i hope. caleb is about done. and like i have said i have a lot of other shit going on ..
-
about done my ass thats shit been sitting there hahaha
-
it will be here this weekend.
-
engines been done. just chillin. jerry doesnt have time right now anyways. buttttttt.. anyways. for an update.. the bottom end is done. and since i wont be seeing jared for another couple weeks ive just been messing around with the head in my spare time. minor port and clean it up nice and prolly a surface and valve job..
-
got the traction bars
its just going to get the old 14b and hf for now and max it out get 230 or so. we will see.
ive been working on my h22 hatch and the galant a little and also emory's stang tonight get that thing into some more primer.
nice to hear the progress club.
-
looks like you get to try out your new work shop jeery
-
yea i have been. its nice just not enough lighting.
-
this shit best be done by sep 4 and 5th cf raceway is have a armdrop 2 day race deal with the do from pinks doing it so you caleb the 5.0 and mine should all be there
-
you need to slow your ass down when you type.
-
shut your face boy. oh and cut your hair :P