:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: walter on April 10, 2010, 07:51:19 AM

Title: Final gear D-series
Post by: walter on April 10, 2010, 07:51:19 AM
All D-series final drive gears are compatibles? i means beacuse ive seen one that says D15B/D16z6 and noy sure if will fils in D16z6 with S20 tranny.
Title: Re: Final gear D-series
Post by: danz on April 10, 2010, 07:34:32 PM
cable and hydro do not interchange.
Title: Re: Final gear D-series
Post by: crttaz on April 10, 2010, 07:43:41 PM
all 10 bolt ring gears interchange from 88-2000, however the countershafts do not.

But they should be kepted in matched sets due to wear.
Title: Re: Final gear D-series
Post by: danz on April 11, 2010, 06:35:31 PM
all 10 bolt ring gears interchange from 88-2000, however the countershafts do not.

But they should be kepted in matched sets due to wear.

always nice to have further clarification. 


ill note this.
Title: Re: Final gear D-series
Post by: 92CXyD on April 12, 2010, 01:07:36 PM
Ok so does that mean if I can use a counter shaft and ring from a CX/VX in a EX transmission? ;D
Title: Re: Final gear D-series
Post by: crttaz on April 13, 2010, 12:10:41 AM
Ok so does that mean if I can use a counter shaft and ring from a CX/VX in a EX transmission? ;D

yes....but I prefer to do it the pther way around, EX FD into a CX/VX tranny
Title: Re: Final gear D-series
Post by: onlyflash944 on April 18, 2010, 11:20:18 PM
Ok so does that mean if I can use a counter shaft and ring from a CX/VX in a EX transmission? ;D

yes....but I prefer to do it the pther way around, EX FD into a CX/VX tranny

maybe he likes doing 85 in second gear.  i did, and the 14b made up for the longer legs real nice
Title: Re: Final gear D-series
Post by: 92CXyD on April 19, 2010, 12:25:19 AM
Ok so does that mean if I can use a counter shaft and ring from a CX/VX in a EX transmission? ;D

yes....but I prefer to do it the pther way around, EX FD into a CX/VX tranny

maybe he likes doing 85 in second gear.  i did, and the 14b made up for the longer legs real nice

Possible road racing setup is what I'm looking at. ;D
Title: Re: Final gear D-series
Post by: crttaz on April 19, 2010, 03:57:10 AM
Ok so does that mean if I can use a counter shaft and ring from a CX/VX in a EX transmission? ;D

yes....but I prefer to do it the pther way around, EX FD into a CX/VX tranny

maybe he likes doing 85 in second gear.  i did, and the 14b made up for the longer legs real nice

Possible road racing setup is what I'm looking at. ;D


96-00 DX HB tranny with CRX 3-4-5, 3.72 FD

Good for 160 in 4th at the mile, 200 in 5th on the salt @ 8000 rpm and 24" tires.