:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: 88dx on June 17, 2010, 02:12:11 AM
-
How many of you WA/OR NOGGLES are going? And whos bringing me beer???
http://www.importfaceoff.net/ (http://www.importfaceoff.net/)
-
Ill be there
-
LIES!!!!! But Hopefully I will make it if i get tunzored in time :O)
-
I am tryin to run the fi sport class need lsd and tuning first but regardless i will be there. Who's bringin the tooler?
-
sunday? i might make it. probably down for a drive out there. wont race. just park and look sexy :P
-
Fuck this car.
-
Ill cruise up the hype r powered crx
-
Ima try but my car needz a tune, and some work stil.l NO WAY will it be ready to run. Fucking tranny is being gay, I have to figure some shit out.
-
ill be there but this time jeff will not drink all my beer. i hope
-
Might be there. Still trying to get a ride. My car is down for a while.
-
I'll be there...still up in the air whether the civic will be ready or not. 90% chance not, but I'm still hopeful.
-
I'll be there w/ my nerd pack.
-
I'll be there w/ my nerd pack.
Dude... I need you BEFORE THAT... Call meh !!! 8) Maybe tunezorz on the way down there and dynoz later??? These BAI need lovins and the slut is full of racegas.... Still... Should just need low boost AFRs done since timing shouldnt change right???
So tyhe racegas shouldnt be an issue???
Call me when you can Dave.
-
Bizzzzzump U fat fucks better show up hopefully the weather is decent :?:
-
no car,,, no go
but im tryin ringo
-
I'll probably go, even though I should stay home and get my car put back together
-
no car,,, no go
but im tryin ringo
so if your cars not running your not going? your fluffy....
-
Fucking comp... They had my address wrong, disks had come yesterday to an address that doesn't exist.
Got them straightened out... (Still have your name on the fucking pkg) SHould be here today... Fucking dummys.... Anyyways I found a hairline crack in my tranny case I need to weld (nothing structural at all, moreso due to some stupidity I had earlier... LOL).
Going to marcus' later in the aftertnoon and hope to have the trans at least bolted to the motor and most prob IN the car all the wa tonight.
Flywheel looks great as do the floater and the hat. Ill post pics of the new disks somewhere here when they show up.
-
Think I'm going testing on friday at bremerton, then sunday i'll be at pacific prolly running 11.50 index or something since i don't have shit for safety equipment. Sidenote getting my license physical tomorrow. If IFO was like an extra week away I'd be good for outlaw...
-
Well, i got the prototype CC twin disks in the mail today and in the car. The actuall disks look (exactly) like the older style with the friction material going completely around the circumerence of the disk... However the hubs HAVE been completely redesigned and do actually utilize the entire IS splining. the trans side disk hub actually protrudes through the disk tu utilize the splines previously not utilized under the floater disk... The motor side disk hub has been redesigned as well... Well see what happens hopefully fucking soon.
Going to put the tranny in and noticed a hairline crack around where the base of the countershaft sits. It was about 1 inch long... I wanted to just JB weld it... But had a bad feeling and called a bunch of people I knew would tell me not to do it, so..... I need to procure a new case (done) strip the shit out of the other one since it has a bunch of new bearings and seals and shit in it (done) and pick up a case from Mitch tomorrow and get busy measuring and assembling (not done) Its looking bleaker and bleaker if im gonna make it.... (that is if the weather cooperates anyways), as if my cars not running, I should be worjking on getting it running. Not fucking around.
-
word on the street is dave just got done tuning a stock block LS-vtak that made 595whp :mexi:
-
yikes
-
why cant the Florida panhandle have a good place for shit sorta shit?
And fuck Holt. Its 1/8 mile only and redneck as fuck.
-
word on the street is dave just got done tuning a stock block LS-vtak that made 595whp :mexi:
ballin! O0
how much torque?
-
401
-
NICE, whos was it?
-
probably kyle and jay. wtf did they do to make another 70ish whp?
-
I will be there welded diff and all. 11.5 would be cool as all i have is a helmet but i doubt i will even go that fast
-
Jigga what?
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg822.imageshack.us%2Fimg822%2F7761%2Fdynographl.jpg&hash=d1e2223e1d3035f249de712acaf0c7eb8397e612)
Nukka who?
-
whos dyno is that ???
-
who do you think?
Deff. not my pile of shit.
-
who's is it that awsome
-
sick!
-
where is the dyno vid nog? ::)
-
Trannys together, Ross is on his way with a tq wrench to check headstuds and adj timing belt, tranny will be in tomorrow Dave well be ready unless something totally random happens
-
what happend to posting pics of the new discs? had any phone calls about my discs?
-
Car is stipped, borrowing a fire jacket and a trans blanket from someone else. Hopefully we can get the cage all done tomorrow....I'll still only be on pump gas, but it will be good for seat time...might try for my license later next week.
-
what happend to posting pics of the new discs? had any phone calls about my discs?
Fuck the pics.. Just put them in. cars all together and ready for dave And because I'm an intellectual being, retorquing headstuds. Its on the ground and ready to go other than that and I need a new harnes plug for the vtak SOl.
-
Wish I could be there. I can't find a ride. >:(
-
so whats the info on this thing? we park in the pits and shit? cuz i sure as shit aint leaving my car anywhere i cant see it lol.
-
All you guys need to just buy a truck that no one is going to steal.
-
tahts $$ i could put in the $$ trap that is me race car :noel:
-
zc
-
i wanna see a vid of fatman running.
-
Good luck whoever is going!
Thought about going up, but having electrical gremlins, so staying close to home.
-
Im almost there with the type r powered crx.
-
just finished all the lil shit with my car gotta stop at home depot on the way for a bolt. anyone know if it cost more to get in if u trailer ur car?
-
just finished all the lil shit with my car gotta stop at home depot on the way for a bolt. anyone know if it cost more to get in if u trailer ur car?
Cost is the same.
See you guys in a few hours hope the weather holds up :?:
-
second in line left lane bitches
-
second in line left lane bitches
god damm u showed up early :o
-
any results yet?
-
sf won fwd.
-
how did jay and kyle do steve? and who else on here ran?
-
yeah what are the results? did fatty run?
-
how did jay and kyle do steve? and who else on here ran?
they ran a 10.91@119 hitting boost cut at the 1/8th cracked a sleeve and threw a rod :mexi:
-
lol owned. i have a ls motor if jay needs for cheap lol. runs ok other than a bad headgasket, any numbers from other cars?
-
Trick slut motor go boom. :o(
-
Import Face Off.avi (http://www.youtube.com/watch?v=njuKpfDbUSE#normal)
-
Trick slut motor go boom. :o(
hope your not talking about your trick slut!
-
:-\
-
no bueno.
-
I got eliminated 1st round elimination broke out pulled a 13.25@105.xx not bad for a ls tranny, stock suspension, and some 205 street tires. oh yeah and no tuning I just ran the map leed did for aj's car