Topic: ::::::::::Pacific Raceways Import Face off 6/27::::::: (Read 8928 times)

88dx · « **on:** June 17, 2010, 02:12:11 AM »

How many of you WA/OR NOGGLES are going? And whos bringing me beer???

http://www.importfaceoff.net/

chris · « **Reply #1 on:** June 17, 2010, 01:48:37 PM »

Ill be there

bigdaddyvtec · « **Reply #2 on:** June 17, 2010, 02:36:00 PM »

LIES!!!!! But Hopefully I will make it if i get tunzored in time :O)

jdmhatchracer94 · « **Reply #3 on:** June 17, 2010, 04:36:42 PM »

I am tryin to run the fi sport class need lsd and tuning first but regardless i will be there. Who's bringin the tooler?

turbohf · « **Reply #4 on:** June 17, 2010, 04:58:24 PM »

sunday? i might make it. probably down for a drive out there. wont race. just park and look sexy

bigdaddyvtec · « **Reply #5 on:** June 17, 2010, 07:04:27 PM »

Fuck this car.

chris · « **Reply #6 on:** June 17, 2010, 07:36:44 PM »

Ill cruise up the hype r powered crx

bigdaddyvtec · « **Reply #7 on:** June 17, 2010, 09:16:21 PM »

Ima try but my car needz a tune, and some work stil.l NO WAY will it be ready to run. Fucking tranny is being gay, I have to figure some shit out.

runsfromdacops · « **Reply #8 on:** June 17, 2010, 11:33:32 PM »

ill be there but this time jeff will not drink all my beer. i hope

d112crzy · « **Reply #9 on:** June 17, 2010, 11:49:56 PM »

Might be there. Still trying to get a ride. My car is down for a while.

narfdanarf · « **Reply #10 on:** June 18, 2010, 12:53:45 AM »

I'll be there...still up in the air whether the civic will be ready or not. 90% chance not, but I'm still hopeful.

leed · « **Reply #11 on:** June 18, 2010, 06:46:26 AM »

I'll be there w/ my nerd pack.

bigdaddyvtec · « **Reply #12 on:** June 18, 2010, 12:54:42 PM »

Quote from: leed on June 18, 2010, 06:46:26 AM

I'll be there w/ my nerd pack.

Dude... I need you BEFORE THAT... Call meh !!!

Maybe tunezorz on the way down there and dynoz later??? These BAI need lovins and the slut is full of racegas.... Still... Should just need low boost AFRs done since timing shouldnt change right???

So tyhe racegas shouldnt be an issue???

Call me when you can Dave.

88dx · « **Reply #13 on:** June 21, 2010, 11:25:51 PM »

Bizzzzzump U fat fucks better show up hopefully the weather is decent

bigdaddyvtec · « **Reply #14 on:** June 22, 2010, 12:20:36 AM »

no car,,, no go

but im tryin ringo

flat_black · « **Reply #15 on:** June 22, 2010, 10:50:39 AM »

I'll probably go, even though I should stay home and get my car put back together

runsfromdacops · « **Reply #16 on:** June 22, 2010, 12:31:41 PM »

Quote from: bigdaddyvtec on June 22, 2010, 12:20:36 AM

no car,,, no go

but im tryin ringo

so if your cars not running your not going? your fluffy....

bigdaddyvtec · « **Reply #17 on:** June 22, 2010, 12:42:28 PM »

Fucking comp... They had my address wrong, disks had come yesterday to an address that doesn't exist.

Got them straightened out... (Still have your name on the fucking pkg) SHould be here today... Fucking dummys.... Anyyways I found a hairline crack in my tranny case I need to weld (nothing structural at all, moreso due to some stupidity I had earlier... LOL).

Going to marcus' later in the aftertnoon and hope to have the trans at least bolted to the motor and most prob IN the car all the wa tonight.

Flywheel looks great as do the floater and the hat. Ill post pics of the new disks somewhere here when they show up.

narfdanarf · « **Reply #18 on:** June 22, 2010, 10:40:06 PM »

Think I'm going testing on friday at bremerton, then sunday i'll be at pacific prolly running 11.50 index or something since i don't have shit for safety equipment. Sidenote getting my license physical tomorrow. If IFO was like an extra week away I'd be good for outlaw...

bigdaddyvtec · « **Reply #19 on:** June 22, 2010, 11:33:06 PM »

Well, i got the prototype CC twin disks in the mail today and in the car. The actuall disks look (exactly) like the older style with the friction material going completely around the circumerence of the disk... However the hubs HAVE been completely redesigned and do actually utilize the entire IS splining. the trans side disk hub actually protrudes through the disk tu utilize the splines previously not utilized under the floater disk... The motor side disk hub has been redesigned as well... Well see what happens hopefully fucking soon.

Going to put the tranny in and noticed a hairline crack around where the base of the countershaft sits. It was about 1 inch long... I wanted to just JB weld it... But had a bad feeling and called a bunch of people I knew would tell me not to do it, so..... I need to procure a new case (done) strip the shit out of the other one since it has a bunch of new bearings and seals and shit in it (done) and pick up a case from Mitch tomorrow and get busy measuring and assembling (not done) Its looking bleaker and bleaker if im gonna make it.... (that is if the weather cooperates anyways), as if my cars not running, I should be worjking on getting it running. Not fucking around.

88dx · « **Reply #20 on:** June 23, 2010, 12:17:51 AM »

word on the street is dave just got done tuning a stock block LS-vtak that made 595whp

narfdanarf · « **Reply #21 on:** June 23, 2010, 12:39:27 AM »

yikes

ironcrx · « **Reply #22 on:** June 23, 2010, 12:46:50 AM »

why cant the Florida panhandle have a good place for shit sorta shit?

And fuck Holt. Its 1/8 mile only and redneck as fuck.

turbohf · « **Reply #23 on:** June 23, 2010, 12:52:44 AM »

Quote from: 88dx on June 23, 2010, 12:17:51 AM

word on the street is dave just got done tuning a stock block LS-vtak that made 595whp

ballin!

how much torque?

88dx · « **Reply #24 on:** June 23, 2010, 12:58:11 AM »

ratcityrex · « **Reply #25 on:** June 23, 2010, 01:25:47 AM »

NICE, whos was it?

90turboteg · « **Reply #26 on:** June 23, 2010, 02:33:58 AM »

probably kyle and jay. wtf did they do to make another 70ish whp?

jdmhatchracer94 · « **Reply #27 on:** June 23, 2010, 04:17:02 PM »

I will be there welded diff and all. 11.5 would be cool as all i have is a helmet but i doubt i will even go that fast

leed · « **Reply #28 on:** June 24, 2010, 02:06:27 AM »

Jigga what?

Nukka who?

88dx · « **Reply #29 on:** June 24, 2010, 02:18:54 AM »

whos dyno is that

News:

Author Topic: ::::::::::Pacific Raceways Import Face off 6/27::::::: (Read 8928 times)

chris

chris