:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: crxvtec91 on June 28, 2010, 06:56:47 PM

Title: Auto to 5spd
Post by: crxvtec91 on June 28, 2010, 06:56:47 PM: Does anyone have the part number to the trans bracket that goes on the frame rail? I look and this is all I can find; http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CIVIC&catcgry2=1995&catcgry3=3DR+SI&catcgry4=KA5MT&catcgry5=ENGINE+MOUNT+%281%29 (http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CIVIC&catcgry2=1995&catcgry3=3DR+SI&catcgry4=KA5MT&catcgry5=ENGINE+MOUNT+%281%29)
Title: Re: Auto to 5spd
Post by: jagojon3 on June 28, 2010, 07:17:56 PM: You talking about #14 in that pic?
Title: Re: Auto to 5spd
Post by: crxvtec91 on June 28, 2010, 07:32:19 PM: Quote from: jagojon3 on June 28, 2010, 07:17:56 PM
You talking about #14 in that pic?

Nope the one that goes around #4, its tack weld to the frame. The Auto one points up, the 5spd one is straight.
Title: Re: Auto to 5spd
Post by: jagojon3 on June 28, 2010, 07:35:38 PM: I could probably pull it off my civic before I scrap it if you need it.
Title: Re: Auto to 5spd
Post by: crxvtec91 on June 28, 2010, 07:42:31 PM: Quote from: jagojon3 on June 28, 2010, 07:35:38 PM
I could probably pull it off my civic before I scrap it if you need it.

I may take you up on that offer, but if I remember right the bracket was like $15 from the dealer.
Title: Re: Auto to 5spd
Post by: jagojon3 on June 28, 2010, 07:52:25 PM: Damn that's cheap, might as well do that.
Title: Re: Auto to 5spd
Post by: narfdanarf on June 28, 2010, 10:22:14 PM: number 23?

http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CIVIC&catcgry2=1995&catcgry3=3DR+SI&catcgry4=KA5MT&catcgry5=FRONT+BULKHEAD (http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CIVIC&catcgry2=1995&catcgry3=3DR+SI&catcgry4=KA5MT&catcgry5=FRONT+BULKHEAD)
Title: Re: Auto to 5spd
Post by: crxvtec91 on June 29, 2010, 06:44:00 PM: Quote from: narfdanarf on June 28, 2010, 10:22:14 PM
number 23?

http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CIVIC&catcgry2=1995&catcgry3=3DR+SI&catcgry4=KA5MT&catcgry5=FRONT+BULKHEAD (http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=CIVIC&catcgry2=1995&catcgry3=3DR+SI&catcgry4=KA5MT&catcgry5=FRONT+BULKHEAD)

Thats the one, hum went up in price, but still cheaper then paying $150+, Thanks!!!!
Title: Re: Auto to 5spd
Post by: onlyflash944 on July 04, 2010, 10:37:18 PM: this conversion didn't cost me anything but a few mm on the cut off wheel and a few 6011 rods. no special bracket needed. i did drill the spot welds and take the entire bracket off to do the modifications, then weld it back on. 'measured' with the eyeball and installed just fine

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi91.photobucket.com%2Falbums%2Fk295%2Fonlyflash944%2F50%2520MPG%2FP1010196.jpg&hash=11dc4f146d3f4afd762441ea5d2bb7ee99cce7c6)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi91.photobucket.com%2Falbums%2Fk295%2Fonlyflash944%2F50%2520MPG%2FP1010197.jpg&hash=87803911db65e80c684bf39b865f78f36399edf1)
Title: Re: Auto to 5spd
Post by: HiProfile on July 05, 2010, 11:12:17 AM: Since it's going to be cut off anyways, I'd just do it flash's way. If you want it to be "perfect" you should get a 5spd shell.