:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: bigdaddyvtec on July 12, 2010, 11:09:39 PM
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff4%2Fbigdaddyvtec%2FSLant%2520eye%2520princess%2Fv4%2FweldedBoatanchor.jpg&hash=d585ed24926ebcb7b1b61a19d180f965b852ac5a)
Oh yes... There will be JB weld too
and paint... LOL
O0
-
at lest i wont be the only one makeing 700hp with window block O0
-
You wont be making 7 period son. :-*
-
how about some open window pics? ;D seriously tho
-
Did you radius the corners of all of the cast stuff pretty well?
-
Did you radius the corners of all of the cast stuff pretty well?
Trust me. Its solid. Good penetrtation and was very cleannnn You dont get welds that cledan on dirty Jap cast if it there any contamination... It does wierd shit when you hit it with the torch.
Block was heated prior to welding as well.
-
...Block was heated prior to welding as well.
Now you sleeves are gonna fall out.
:P
-
Leave it to someone here to be a total faggot... I just didnt think it would be you. The sleeves are fine.
-
Here comes widebody....
http://www.realhomemadeturbo.com/forum/index.php?action=who (http://www.realhomemadeturbo.com/forum/index.php?action=who)
-
You dont get welds that cledan on dirty Jap cast if it there any contamination... It does wierd shit when you hit it with the torch.
this, who welded it?
-
This isn't ricky's first rodeo. He's pretty much a pro at welding windows shut nowadays.
-
thats tits, I used cardboard with duct tape on BDVT MS job after I had him fired but it didn't work, my bad spiker.
-
Leave it to someone here to be a total faggot... I just didnt think it would be you. The sleeves are fine.
Damn princess, twas a good natured stab.
When do you plan to have the slut back together?
-
You dont get welds that cledan on dirty Jap cast if it there any contamination... It does wierd shit when you hit it with the torch.
this, who welded it?
As Narftard mentioned... Ricky at Speedfactory. Hes had a bit of practice (Most recent weas an NA K series running in the low tens), and knows what works... LOL. The plate was bent to conform to the block nicely, and also any sharp edges internally (succh as at the bottom of the sleeves) were cleaned up and deburred. He was happy to help me out... The SF guys have been very helpfull... Special thanks to Matt and Ricky :yes:
Im going to JB weld over the beads though and overlap where the plate is just to make sure that I dont have any weird seeping or wicking issues for proactivity.
-
I take it the rest of the block was good? Max hardcore overbore cleaned it up? :noel:
-
Going out to 89mm ;D
The cylinder bores were perfect... The bearings were PERFECT, The pistons were perfect... Just that fucking rod bolt >:(
I could have prob gone only to 88mm, Bt I figuref F it, If this thing lasts another 2 years I got my moneys worth, I can sell it to an NA guy for a few hundred bucks then start over, If I havent moved on. You litterally cant even see that part of the block since the turbo compressor hangs right in front of it.
-
That window looks rather quality. Pretty atleast.
-
You litterally cant even see that part of the block since the turbo compressor hangs right in front of it.
I'd make a new mani that highlighted the window as the focal point, maybe even a neon tube to shine it up at night :noel:
-
You litterally cant even see that part of the block since the turbo compressor hangs right in front of it.
I'd make a new mani that highlighted the window as the focal point, maybe even a neon tube to shine it up at night :noel:
Easily visible would work.
-
Looks like they did a nice job Spikey. O0
-
just right "NIG RIGGED" on it and call it a day O0
the B18C1 that WAS in the R had thrown a rod out the back, threw the oil passage. and was welded up. looked pretty sexy. only the guy at jiffy lube would ever see it tho...
-
Front page block right there. H-T asks, and its a oil expansion chamber
-
The more i look at the pic the more i giggle and LOL.
-
Now it's RHMT ;D
-
It always was... You werent here for the old build thread and the 100LB bottle of nitrous we huffed building this thing, aor for the 542`25634 trannys demolished or Randals chin flapping in the wind outrunning cruiser bikes that werent even trying with two fat old people on them...... or... Any of the good shit... LOL....
Theres not a shop built part on the car. Josh, Mitch, Randy Mike dope or me did every bit of work to the slut in Mike, Mitches or my garage, and occasionally in Ross' driveway...
LOL
-
It always was... You werent here for the old build thread and the 100LB bottle of nitrous we huffed building this thing, aor for the 542`25634 trannys demolished or Randals chin flapping in the wind outrunning cruiser bikes that werent even trying with two fat old people on them...... or... Any of the good shit... LOL....
Theres not a shop built part on the car. Josh, Mitch, Randy Mike dope or me did every bit of work to the slut in Mike, Mitches or my garage, and occasionally in Ross' driveway...
LOL
i miss the old build thread, and all the fucktards that whored and trashed it...
-
It always was... You werent here for the old build thread and the 100LB bottle of nitrous we huffed building this thing, aor for the 542`25634 trannys demolished or Randals chin flapping in the wind outrunning cruiser bikes that werent even trying with two fat old people on them...... or... Any of the good shit... LOL....
Theres not a shop built part on the car. Josh, Mitch, Randy Mike dope or me did every bit of work to the slut in Mike, Mitches or my garage, and occasionally in Ross' driveway...
LOL
Didn't Marcus do the fab work on it?
-
Thisw manifold and dumps yes.
Originally it had a top mount and a PT6176 SP on it
-
Thats just fucking pimp!
-
My soul cries out for a windowed block.