Topic: How to properly close a window.... (Read 6980 times)

bigdaddyvtec · « **on:** July 12, 2010, 11:09:39 PM »

Oh yes... There will be JB weld too

and paint... LOL

runsfromdacops · « **Reply #1 on:** July 12, 2010, 11:11:16 PM »

at lest i wont be the only one makeing 700hp with window block

bigdaddyvtec · « **Reply #2 on:** July 12, 2010, 11:16:01 PM »

You wont be making 7 period son.

shadow · « **Reply #3 on:** July 12, 2010, 11:18:23 PM »

how about some open window pics? ;D seriously tho

rsmith2786 · « **Reply #4 on:** July 12, 2010, 11:31:07 PM »

Did you radius the corners of all of the cast stuff pretty well?

bigdaddyvtec · « **Reply #5 on:** July 12, 2010, 11:33:33 PM »

Quote from: rsmith2786 on July 12, 2010, 11:31:07 PM

Did you radius the corners of all of the cast stuff pretty well?

Trust me. Its solid. Good penetrtation and was very cleannnn You dont get welds that cledan on dirty Jap cast if it there any contamination... It does wierd shit when you hit it with the torch.

Block was heated prior to welding as well.

snm95ls · « **Reply #6 on:** July 12, 2010, 11:37:23 PM »

Quote from: bigdaddyvtec on July 12, 2010, 11:33:33 PM

...Block was heated prior to welding as well.

Now you sleeves are gonna fall out.

bigdaddyvtec · « **Reply #7 on:** July 12, 2010, 11:39:51 PM »

Leave it to someone here to be a total faggot... I just didnt think it would be you. The sleeves are fine.

Towdogg · « **Reply #8 on:** July 12, 2010, 11:42:09 PM »

Here comes widebody....

http://www.realhomemadeturbo.com/forum/index.php?action=who

highroller54 · « **Reply #9 on:** July 12, 2010, 11:43:50 PM »

Quote from: bigdaddyvtec on July 12, 2010, 11:33:33 PM

You dont get welds that cledan on dirty Jap cast if it there any contamination... It does wierd shit when you hit it with the torch.

this, who welded it?

narfdanarf · « **Reply #10 on:** July 12, 2010, 11:48:14 PM »

This isn't ricky's first rodeo. He's pretty much a pro at welding windows shut nowadays.

highroller54 · « **Reply #11 on:** July 12, 2010, 11:50:10 PM »

Quote from: widebody93 on July 12, 2010, 11:43:52 PM

thats tits, I used cardboard with duct tape on BDVT MS job after I had him fired but it didn't work, my bad spiker.

snm95ls · « **Reply #12 on:** July 12, 2010, 11:51:09 PM »

Quote from: bigdaddyvtec on July 12, 2010, 11:39:51 PM

Leave it to someone here to be a total faggot... I just didnt think it would be you. The sleeves are fine.

Damn princess, twas a good natured stab.

When do you plan to have the slut back together?

bigdaddyvtec · « **Reply #13 on:** July 12, 2010, 11:52:14 PM »

Quote from: highroller54 on July 12, 2010, 11:43:50 PM

Quote from: bigdaddyvtec on July 12, 2010, 11:33:33 PM
You dont get welds that cledan on dirty Jap cast if it there any contamination... It does wierd shit when you hit it with the torch.

this, who welded it?

As Narftard mentioned... Ricky at Speedfactory. Hes had a bit of practice (Most recent weas an NA K series running in the low tens), and knows what works... LOL. The plate was bent to conform to the block nicely, and also any sharp edges internally (succh as at the bottom of the sleeves) were cleaned up and deburred. He was happy to help me out... The SF guys have been very helpfull... Special thanks to Matt and Ricky :yes:

Im going to JB weld over the beads though and overlap where the plate is just to make sure that I dont have any weird seeping or wicking issues for proactivity.

highroller54 · « **Reply #14 on:** July 12, 2010, 11:55:58 PM »

I take it the rest of the block was good? Max hardcore overbore cleaned it up?

bigdaddyvtec · « **Reply #15 on:** July 13, 2010, 12:01:11 AM »

Going out to 89mm ;D

The cylinder bores were perfect... The bearings were PERFECT, The pistons were perfect... Just that fucking rod bolt

I could have prob gone only to 88mm, Bt I figuref F it, If this thing lasts another 2 years I got my moneys worth, I can sell it to an NA guy for a few hundred bucks then start over, If I havent moved on. You litterally cant even see that part of the block since the turbo compressor hangs right in front of it.

leed · « **Reply #16 on:** July 13, 2010, 12:02:06 AM »

That window looks rather quality. Pretty atleast.

highroller54 · « **Reply #17 on:** July 13, 2010, 12:07:31 AM »

Quote from: bigdaddyvtec on July 13, 2010, 12:01:11 AM

You litterally cant even see that part of the block since the turbo compressor hangs right in front of it.

I'd make a new mani that highlighted the window as the focal point, maybe even a neon tube to shine it up at night

leed · « **Reply #18 on:** July 13, 2010, 12:16:51 AM »

Quote from: highroller54 on July 13, 2010, 12:07:31 AM

Quote from: bigdaddyvtec on July 13, 2010, 12:01:11 AM
You litterally cant even see that part of the block since the turbo compressor hangs right in front of it.

I'd make a new mani that highlighted the window as the focal point, maybe even a neon tube to shine it up at night

Easily visible would work.

Passenger · « **Reply #19 on:** July 13, 2010, 12:22:14 AM »

Looks like they did a nice job Spikey.

turbohf · « **Reply #20 on:** July 13, 2010, 12:37:38 AM »

just right "NIG RIGGED" on it and call it a day

the B18C1 that WAS in the R had thrown a rod out the back, threw the oil passage. and was welded up. looked pretty sexy. only the guy at jiffy lube would ever see it tho...

imburne · « **Reply #21 on:** July 13, 2010, 01:27:47 AM »

Front page block right there. H-T asks, and its a oil expansion chamber

bigdaddyvtec · « **Reply #22 on:** July 13, 2010, 10:41:46 AM »

The more i look at the pic the more i giggle and LOL.

Teg2boo · « **Reply #23 on:** July 13, 2010, 10:45:57 AM »

Now it's RHMT ;D

bigdaddyvtec · « **Reply #24 on:** July 13, 2010, 10:50:48 AM »

It always was... You werent here for the old build thread and the 100LB bottle of nitrous we huffed building this thing, aor for the 542`25634 trannys demolished or Randals chin flapping in the wind outrunning cruiser bikes that werent even trying with two fat old people on them...... or... Any of the good shit... LOL....

Theres not a shop built part on the car. Josh, Mitch, Randy Mike dope or me did every bit of work to the slut in Mike, Mitches or my garage, and occasionally in Ross' driveway...

LOL

bouncinofftherevlimiter · « **Reply #25 on:** July 15, 2010, 11:23:13 PM »

Quote from: bigdaddyvtec on July 13, 2010, 10:50:48 AM

It always was... You werent here for the old build thread and the 100LB bottle of nitrous we huffed building this thing, aor for the 542`25634 trannys demolished or Randals chin flapping in the wind outrunning cruiser bikes that werent even trying with two fat old people on them...... or... Any of the good shit... LOL....

Theres not a shop built part on the car. Josh, Mitch, Randy Mike dope or me did every bit of work to the slut in Mike, Mitches or my garage, and occasionally in Ross' driveway...

LOL

i miss the old build thread, and all the fucktards that whored and trashed it...

Passenger · « **Reply #26 on:** July 16, 2010, 12:23:50 AM »

Quote from: bigdaddyvtec on July 13, 2010, 10:50:48 AM

It always was... You werent here for the old build thread and the 100LB bottle of nitrous we huffed building this thing, aor for the 542`25634 trannys demolished or Randals chin flapping in the wind outrunning cruiser bikes that werent even trying with two fat old people on them...... or... Any of the good shit... LOL....

Theres not a shop built part on the car. Josh, Mitch, Randy Mike dope or me did every bit of work to the slut in Mike, Mitches or my garage, and occasionally in Ross' driveway...

LOL

Didn't Marcus do the fab work on it?

bigdaddyvtec · « **Reply #27 on:** July 16, 2010, 12:47:15 AM »

Thisw manifold and dumps yes.

Originally it had a top mount and a PT6176 SP on it

crxvtec91 · « **Reply #28 on:** July 16, 2010, 01:14:22 AM »

Thats just fucking pimp!

Joseph Davis · « **Reply #29 on:** July 17, 2010, 10:08:42 AM »

My soul cries out for a windowed block.

News:

Author Topic: How to properly close a window.... (Read 6980 times)