:::RHMT::: Real Home Made Turbo

General Category => General Discussion => Topic started by: bigdaddyvtec on September 21, 2010, 07:17:49 PM

Title: Entertaining thread
Post by: bigdaddyvtec on September 21, 2010, 07:17:49 PM
JD seems this homos in your neck of the woods


http://www.honda-tech.com/showthread.php?t=2836976 (http://www.honda-tech.com/showthread.php?t=2836976)


BRMS mentioned, figured you might know of the car??? 400 on a stock d on 19 PSI on 57 trim??? Uhhh OK???  :-X
Title: Re: Entertaining thread
Post by: Towdogg on September 21, 2010, 07:34:43 PM
 :?:

Title: Re: Entertaining thread
Post by: runsfromdacops on September 21, 2010, 07:36:01 PM
400 on a 57trim? Must be the bew billet 57?
Title: Re: Entertaining thread
Post by: shogun on September 21, 2010, 07:40:15 PM
ebay 57 trim mind you!
Title: Re: Entertaining thread
Post by: snm95ls on September 21, 2010, 07:42:22 PM
Yeah, I saw that on DSO too.

If they say so...

Title: Re: Entertaining thread
Post by: runsfromdacops on September 21, 2010, 07:46:18 PM
I think its already locked on ht.

400 on a egay 57trim gtfo
Title: Re: Entertaining thread
Post by: asx on September 21, 2010, 07:48:42 PM
They're talking about the dyno showing 2k rpms higher isn't going to effect the HP readings...


Call me a nerd, but last I checked:
HP = Torque (ftlbs) * RPMs / 5252

Then again, dynos run off magic and farie dust so whatev
Title: Re: Entertaining thread
Post by: snm95ls on September 21, 2010, 07:52:54 PM
They're talking about the dyno showing 2k rpms higher isn't going to effect the HP readings...


Call me a nerd, but last I checked:
HP = Torque (ftlbs) * RPMs / 5252

Then again, dynos run off magic and farie dust so whatev

Yeah, i was thinking that I didn't trust it when they said it had an RPM glitch.  Just didn't put two and two together.



Title: Re: Entertaining thread
Post by: asx on September 21, 2010, 07:59:13 PM
If some cared enough they could arbitrarily redo the hp graph since the torque shouldn't be effected by the "glitch" then again eho knows what kind of hacking was done to the weather station
Title: Re: Entertaining thread
Post by: jay on September 21, 2010, 08:52:15 PM
I GOT 500000 HP BECAUSE THE DYNO GRAPH SAYS SO ::)
Title: Re: Entertaining thread
Post by: 1991civicsi on September 21, 2010, 09:15:58 PM
Lets see his time slip when he goes to the track.
Title: Re: Entertaining thread
Post by: snm95ls on September 21, 2010, 09:25:43 PM
Lets see his time slip when he goes to the track.

It already blew up...
Title: Re: Entertaining thread
Post by: 92CXyD on September 21, 2010, 09:54:14 PM
I call bs I blew my stock d16z6 up with 12psi. and below 8k.  :?:
Title: Re: Entertaining thread
Post by: turbob16hatch on September 21, 2010, 10:39:28 PM
Haha, what a joke. that turbo wouldn't make that at all. Didn't someone here make like 350whp at like 25+ psi on one.  :?:
Title: Re: Entertaining thread
Post by: HiProfile on September 22, 2010, 12:17:40 AM
That Epic tuning D16Z6 was supposedly a stock d16 internally. Spiked to ~420whp, 394whp "normal, usually tracked at 350ish. I know a guy that raced against him when they were up this way. I think it was doing high 10's at the time. They also took pictures when they bent a rod and pulled it apart.

so.....................
Title: Re: Entertaining thread
Post by: 2slow on September 22, 2010, 02:48:03 AM
On DSO they said the guy lied and it is a built motor. He lied about the motor what's to stop him from lying about the turbo
Title: Re: Entertaining thread
Post by: bigdaddyvtec on September 22, 2010, 02:53:29 AM
Haha, what a joke. that turbo wouldn't make that at all. Didn't someone here make like 350whp at like 25+ psi on one.  :?:

I made 300/305 on a bone stock F22b1 on one at 19-20PSI like 4 years ago.
Title: Re: Entertaining thread
Post by: Joseph Davis on September 22, 2010, 07:39:11 AM
Yeah, I used to tune for Blueridge.  I got fired for being at the hospital with my mom and not being able to give Brandon an answer at 7:30 at night about being able to pick up a last minute tune the next day.  He fired me via AIM because I wasn't responding to a computer I wasn't in front of.

Brandon doesn't know how to use his equipment, which is an early yet entirely workable DynoCOM.  If the car made 200 wtq at revlimit, which by Brandon's later eCtune screenshot happened at 7800 rpms... on a stock motor... then you can juggle the numbers around to arrive at 297 whp, which is a little low.  D16 usually break 300 at 17-18 psi.  Also, drop the 11% corrections off of those figures - 267 whp.   Such knowledge.  Such basic math skills.

Title: Re: Entertaining thread
Post by: Joseph Davis on September 22, 2010, 07:42:49 AM
The same thread on the local theives den: http://www.carolinahondas.com/multimedia/110150-413whp-bone-stock-d16z6.html (http://www.carolinahondas.com/multimedia/110150-413whp-bone-stock-d16z6.html)

Cannon fodder:  http://www.carolinahondas.com/events-get-togethers/105868-shadyside-dragway-import-race-saturday-sept-25-6pm-gates-open.html (http://www.carolinahondas.com/events-get-togethers/105868-shadyside-dragway-import-race-saturday-sept-25-6pm-gates-open.html)
Title: Re: Entertaining thread
Post by: ApexSilver06MR on September 22, 2010, 11:43:59 AM
Yeah, I used to tune for Blueridge.  I got fired for being at the hospital with my mom and not being able to give Brandon an answer at 7:30 at night about being able to pick up a last minute tune the next day.  He fired me via AIM because I wasn't responding to a computer I wasn't in front of.

Brandon doesn't know how to use his equipment, which is an early yet entirely workable DynoCOM.  If the car made 200 wtq at revlimit, which by Brandon's later eCtune screenshot happened at 7800 rpms... on a stock motor... then you can juggle the numbers around to arrive at 297 whp, which is a little low.  D16 usually break 300 at 17-18 psi.  Also, drop the 11% corrections off of those figures - 267 whp.   Such knowledge.  Such basic math skills.



FUCK BRMS.   What a fucking douch about what happened to JD. 

I still made my hundreds off of him. 
Title: Re: Entertaining thread
Post by: Joseph Davis on September 22, 2010, 01:04:13 PM
How so?
Title: Re: Entertaining thread
Post by: ApexSilver06MR on September 22, 2010, 01:29:40 PM
How so?

sold him some doritos, thanks to you sir
Title: Re: Entertaining thread
Post by: Joseph Davis on September 22, 2010, 01:39:09 PM
Yeah, about that.  He told me he found them a lot cheaper the day after I sent him your info, then wouldn't tell me where/price.

I have eCtune dealer, he buys eCtune dealer.
Goforth paints his car black, he paints his car black.
Goforth gets gold Bogarts, he gets gold Bogarts.
Rinse and repeat.

When Miller made that recent copy and paste comment... well, I know they've talked on the phone.
Title: Re: Entertaining thread
Post by: ApexSilver06MR on September 22, 2010, 01:48:04 PM
Yeah, about that.  He told me he found them a lot cheaper the day after I sent him your info, then wouldn't tell me where/price.

I have eCtune dealer, he buys eCtune dealer.
Goforth paints his car black, he paints his car black.
Goforth gets gold Bogarts, he gets gold Bogarts.
Rinse and repeat.

When Miller made that recent copy and paste comment... well, I know they've talked on the phone.

what a fag..  he still bought them since he couldnt afford the 5000 china buy in
Title: Re: Entertaining thread
Post by: Corey on September 22, 2010, 05:27:50 PM
the epic tuning car was dynoed on evans dyno, it probably made 30% less the that on any other dyno.

we took a 745WHP evans tuned car to a local dynojet and it made 605
Title: Re: Entertaining thread
Post by: bigdaddyvtec on September 22, 2010, 05:59:42 PM
Evans use Paks? Thats good to know for arguments sake with a local buddy who jocks evans 580 WHP GT30r (JDs fav) dyno plots...
Title: Re: Entertaining thread
Post by: Joseph Davis on September 22, 2010, 06:30:08 PM
If you refer to me in the same sentence as GT30R again I'll kick you in the penis.
Title: Re: Entertaining thread
Post by: jay on September 22, 2010, 06:44:33 PM
If you refer to me in the same sentence as GT30R again I'll kick you in the penis.

ship my shit faggot
Title: Re: Entertaining thread
Post by: Corey on September 22, 2010, 09:27:00 PM
If you refer to me in the same sentence as GT30R again I'll kick you in the penis.

Joseph "GT30R" Davis. sounds like a good UFC name.
Title: Re: Entertaining thread
Post by: Joseph Davis on September 23, 2010, 10:13:12 AM
If you refer to me in the same sentence as GT30R again I'll kick you in the penis.

Joseph "GT30R" Davis. sounds like a good UFC name.

I'm more likely to kick you in the penis and get away with it than Spiker.  Bring it.