:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: malichite on October 13, 2011, 03:27:36 PM

Title: Malichite Daily CRX
Post by: malichite on October 13, 2011, 03:27:36 PM: Current Project Cost $650

Car $$$Free$$$
Complete B18 with trans and HASport Mounts, shift linkage axles $500
Summit Paint Systems Red 1 Gallon $150ish

Well, as some of you may know, I have my first child on the way due here in a few months. I have got rid of most of my big projects and am making room for one project. Had a friend give me a CRX he picked up a long time ago as a project and never got anywhere with. It is a 90 CRX HF with an SI interior in it. No engine or trans in decent shape. Here is where it is at so far.

Most of the body is pretty straight minus some small dings here and there. The door sills, hatch surround and engine bay were painted black for some dumb reason and done very badly. Got most of the engine bay striped of accessories and started sanding all of that down.

I then moved onto the drivers side door sill where I saw some cracks which I assumed were in the sheet metal. Below you can see what I found when I started exploring. The car looks like it was t boned lightly, but the repair was done horribly. There was a 1/2 x 1/2 piece of oak strip that was used to establish a straight line and build from.

Once that was put in, it was filled with spray foam, cut down to shape and covered in 1/2 or more of bondo. Can't belive someone actually drove the car like this.

Anyways, plan for the repair will be to cut the door section out of a good car. I will then trim back the damage on this and jack the sill back out tell it is straight. I am then going to weld a solid beam on the inside of the channel. once that is done, I will replace the outside sheet metal. Sad thing is my repair will probably take less time then the last "repair"

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4133-2%2FIMG_20110315_184626.jpg&hash=7a56716ab75fb4c33baa1c14f28598700beacc8f)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4136-2%2FIMG_20110315_184634.jpg&hash=d86a503f7e3960b0fd39586fe9b7c5f9dd126d73)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4139-2%2FIMG_20110315_184655.jpg&hash=d36d80743941057e0b1e2cecff09fa9a232eb62b)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4142-2%2FIMG_20110315_184702.jpg&hash=d6dd448bce36bd5a6030c5fab9e46933aed3b2fe)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4102-2%2FIMG_20110522_153941.jpg&hash=445a5fa5f3f79388e758966fe5f4533c075fd925)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4106-2%2FIMG_20110522_153832.jpg&hash=d87c307e31ab5e679fa2a902bf6220e3e2b86d2d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4115-2%2FIMG_20110522_154158.jpg&hash=5f9e924f09b7ae8061adb722efc3094970305e0c)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4118-2%2FIMG_20110522_154153.jpg&hash=253c20efbf9af284c71445ea14cbf24a739d3527)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4127-2%2FIMG_20110524_200534.jpg&hash=3637fea5625b5e8d520434e0c3de0be4d1183e16)
Title: Re: Malichite Daily CRX
Post by: malichite on October 13, 2011, 03:27:59 PM: Got some more work done today. Managed to get the door sill straightened out. Used a hilift jack, braced up the passanger side door then placed another piece of steel on the inside of the drivers side sill and jacked away. Once that was straight, cut the remainder of the damage away. I then got a piece of .120 wall square tube and welded that inside. Once that was done, I got a doner sill out of another project of mine and started fitting it in. Finish wasn't perfect but once the trim is on, it should look pretty darn good. At least it is all metal now. Also patched up the antenna hole while I was at it. Picture time.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4163-2%2FIMG_20110529_122846.jpg&hash=ecf999073eebdf366a0b8d848d1ed6a114d3a95c)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4166-2%2FIMG_20110529_122859.jpg&hash=caa0be5bab3551ef4dbeade069a91374f15780f7)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4172-2%2FIMG_20110529_130556.jpg&hash=70a159451e56f5bf4021fdd774084591a8dd9e96)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4175-2%2FIMG_20110529_132734.jpg&hash=fa872cae0515306141e712ccbe15846c1287ba72)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4178-2%2FIMG_20110529_132739.jpg&hash=9c023e6fbc864cb16403af1f448bc038b183673a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4151-2%2FIMG_20110529_201537.jpg&hash=ceef3fc5b30a60a9fb5bfaea222b170f15155538)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4154-2%2FIMG_20110529_201549.jpg&hash=bf9b0515f06dbb48ce8d9621827cf3926dc572bf)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4148-2%2FIMG_20110529_201517.jpg&hash=c69afb820b63a50c332fb38b54a78240d6474f3e)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4145-2%2FIMG_20110529_201511.jpg&hash=0afe54371ad056ec02baaf5b4ecfd438cfc6d816)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4157-2%2FIMG_20110529_201609.jpg&hash=7620cd3fe34a7eb58f131e8f0e10b4cd6e182895)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4160-2%2FIMG_20110529_201651.jpg&hash=0050b11b9d4d63c6be111c51e7225bfb6d29fc2f)
Title: Re: Malichite Daily CRX
Post by: malichite on October 13, 2011, 03:28:23 PM: Well, got the body work done on it today. Isn't perfect, but not to shabby in my book. Started getting the door sill primed also. Hope to get all the door sills and hatch area primed and painted this week. Once that is done, the body goes back together and I can squirt the rest of it.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4190-2%2FIMG_20110530_194218.jpg&hash=bd318e11ebf01d61ccdc9dc917f64b9f42697699)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4187-2%2FIMG_20110530_194224.jpg&hash=181a51abbc9be82f2360907aa818a5828e879eaa)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4184-2%2FIMG_20110530_194247.jpg&hash=1830485b08224d9349866230532494aac60c41da)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4181-2%2FIMG_20110530_200135.jpg&hash=d4bcfe14a9c9767f16e0f7391c56ca2cf5e46f75)
Title: Re: Malichite Daily CRX
Post by: malichite on October 13, 2011, 03:28:39 PM: I believe sanding if only done once you give up. It seems to be never ending however I have not given up yet. I have finished scraping the glue from the joints and have started welding the seems and filing them. It is a rediculous amount of work that I will never do again but so far I am happy with it. On to the pictures.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4195-2%2F2011-09-10_15-55-49_537.jpg&hash=5830326c2a880502376a0787f7d551f869fc1fe7)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4198-2%2F2011-09-10_15-56-06_998.jpg&hash=682ffadeca3ac4131d79e7df4a5de7d14a810ff9)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4201-2%2F2011-09-10_15-56-14_444.jpg&hash=f6e10dc35a69c67ce1bca22793d26bfd77139b7a)
Title: Re: Malichite Daily CRX
Post by: malichite on October 13, 2011, 03:28:53 PM: Well, my new daughter has been keeping me super busy, but I gota little bit done. Got the rest of the un needed holes in the firewall filled, pulled all the front suspension off and got it painted. Next step is to clea up the rear cross member and get that back up and in. Just put a big order for parts in so I am waiting on those. Will be doing all new bushings, ball joints, wheel bearings blah blah blah. I did have my ARP wheel studs show up today though. Will be putting those in as soon as the wheel bearings get here.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.thezcr.com%2Fgallery%2Fdata%2F500%2Fmedium%2F2011-09-23_13-16-18_793.jpg&hash=28674c516669453e95557d9f46f85eb0332e7c2a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.thezcr.com%2Fgallery%2Fdata%2F500%2Fmedium%2F2011-09-23_14-21-12_928.jpg&hash=d8e0c018b4a41e6ce3532a3b1b727dcce7da2beb)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.thezcr.com%2Fgallery%2Fdata%2F500%2Fmedium%2F2011-09-23_14-21-36_838.jpg&hash=074c09ad405c4c6193b10ec512ce9c5674e31d30)
Title: Re: Malichite Daily CRX
Post by: malichite on October 13, 2011, 03:29:15 PM: (https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4213-2%2F2011-09-29_05-54-17_454.jpg&hash=fb3d2b032d10711bff6ca0766772ff5b84184e58)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4210-2%2F2011-09-29_05-54-31_740.jpg&hash=e7c0a0f9125852efc6d729d065f2266528e07adf)
Title: Re: Malichite Daily CRX
Post by: malichite on October 13, 2011, 03:29:29 PM: Well, got a little bit of work done. Got the rear cross member cleaned up and repainted. Also got some more parts in the mail :) Getting closer slowly.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4219-2%2F2011-10-05_05-53-32_396.jpg&hash=15caae035713370d77004b3f9722062bc9d27119)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4216-2%2F2011-10-05_05-52-36_606.jpg&hash=ba957f02eb18c982094354b47d4aee39a0029666)
Title: Re: Malichite Daily CRX
Post by: malichite on October 13, 2011, 03:29:40 PM: Got a lot done this weekend but not many pictures to show for it. I got the engine cleaned of all of its road grim. Still have a few small spots that need some work but pretty much ready to go. Had to go scrounge a bunch of bolts from the junk yard. Also had to gather a few missing trinkets (water necks, breather box...) I also picked up a new t support and windage tray cowl. Need to get those cleaned up and painted so they can go on.

I also got the bushings burned out of the control arms. Got the spindles stripped down and a bunch of other parts sand blasted as well. Will need to get a fresh coat of paint on all of those so I can start assembling the suspension again. Have brand new wheel bearings sitting on the shelf. The wrong bushings were sent so those will need to be exchanged. Still need new ball joints before I can get it back on its wheels also.

Lastly I got the fuel system converted over to AN and got the bulkhead fitting installed so that is all ready to go.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4222-2%2F2011-10-10_05-56-25_694.jpg&hash=fa055a57e81287604e58a1f57d858ae767ae3cc9)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4225-2%2F2011-10-10_05-56-53_229.jpg&hash=fa4542182eb95d7f83310b8691df93d4525cf3e7)
Title: Re: Malichite Daily CRX
Post by: malichite on October 13, 2011, 08:46:00 PM: Timing belt water pump tensioner and other trinkets ordered up. should have the engine in in a few days.
Title: Re: Malichite Daily CRX
Post by: jdmhatchracer94 on October 13, 2011, 09:51:11 PM: awsomeness
Title: Re: Malichite Daily CRX
Post by: speedjunky01 on October 14, 2011, 12:05:15 AM: not a bad save at all trying to do the same on my CRX
Title: Re: Malichite Daily CRX
Post by: HiProfile on October 15, 2011, 02:15:57 AM: I hope this won't end up like the double-d buildathon. Looks promising so far.
Title: Re: Malichite Daily CRX
Post by: snm95ls on October 15, 2011, 03:55:42 AM: Holy fuck!

That is probably the worst body work I have seen.

Nice work sir.
Title: Re: Malichite Daily CRX
Post by: malichite on October 16, 2011, 11:48:33 PM: Still waiting on a few parts but got some more done today. Got some of my parts that I sand blasted all painted. Also spent some time cleaning out 20+ years of dirt from the wheel wells and got a fresh coat of undercoating put on. Love having a giant box of clean shinny parts :) It is going to be so nice to put everything together and have all new clean parts.

20+ years of dirt
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4249-2%2F2011-10-16_15-28-09_592.jpg&hash=7435030f81e75194e003f27e2ec5b40cb1890f7c)

All cleaned up
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4246-2%2F2011-10-16_15-30-25_169.jpg&hash=67353d98f3d400e3bff2ebf29c1649345f63efd6)

All Painted...That probably wont last long :(
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4231-2%2F2011-10-16_18-47-06_896.jpg&hash=09addad4f78f7cc8745d23f04e4122bf92f7c8b2)

Sandblasted parts
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4243-2%2F2011-10-16_15-42-56_234.jpg&hash=b9b7607d84af585df9d89c32097c0da5f6c408df)

Painted Spindles and Dust shields
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4234-2%2F2011-10-16_18-46-39_840.jpg&hash=e4e593085bb3b0819dc1e6e4dd32c351e396c877)

Big box of parts! :) Also have the painted shock forks and control arms in the box.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4237-2%2F2011-10-16_18-46-31_38.jpg&hash=bbea23b5324d3aea0411ac1068cafc7d6962a6b1)

Resting for the night waiting for more parts.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4240-2%2F2011-10-16_18-46-20_995.jpg&hash=f13bda8887bd92a662ec790c7e48a5a15386764c)
Title: Re: Malichite Daily CRX
Post by: ratcityrex on October 17, 2011, 01:19:05 AM: Looks good man. Can't wait to see it all done
Title: Re: Malichite Daily CRX
Post by: crxvtec91 on October 17, 2011, 09:16:37 AM: Quote from: ratcityrex on October 17, 2011, 01:19:05 AM
Looks good man. Can't wait to see it all done
Title: Re: Malichite Daily CRX
Post by: shogun on October 17, 2011, 09:22:38 AM: Quote from: ratcityrex on October 17, 2011, 01:19:05 AM
Looks good man. Can't wait to see it all done
Title: Re: Malichite Daily CRX
Post by: jdmhatchracer94 on October 17, 2011, 09:16:52 PM: I wanna see it at next years dyno day. Missed not seein the sol there.
Title: Re: Malichite Daily CRX
Post by: crxrocks on October 17, 2011, 11:26:20 PM: I'll give you $.50 for those kick ass rims.
Title: Re: Malichite Daily CRX
Post by: malichite on October 17, 2011, 11:33:31 PM: Quote from: crxrocks on October 17, 2011, 11:26:20 PM
I'll give you $.50 for those kick ass rims.

They match your yellow honda logo on the front of your crx
Title: Re: Malichite Daily CRX
Post by: crxrocks on October 17, 2011, 11:41:26 PM: haha - that's long gone - haha
Title: Re: Malichite Daily CRX
Post by: turbohf on October 18, 2011, 12:24:30 AM: goddamn i hate those wheels... :mexi:
Title: Re: Malichite Daily CRX
Post by: malichite on October 18, 2011, 08:42:52 AM: I hate them to. The original owner of the car wants them back. I have a set of Kosei K1s to go on it :evil:
Title: Re: Malichite Daily CRX
Post by: crxvtec91 on October 18, 2011, 10:15:25 AM: Quote from: crxrocks on October 17, 2011, 11:26:20 PM
I'll give you $.50 to blow them up!

Fix it for you!
Title: Re: Malichite Daily CRX
Post by: ratcityrex on October 18, 2011, 10:25:50 AM: Quote from: crxrocks on October 17, 2011, 11:41:26 PM
haha - that's long gone - haha

I know your kinda og on some other sites and all but where is your intro post nagga??
Title: Re: Malichite Daily CRX
Post by: HiProfile on October 22, 2011, 12:50:17 PM: Quote from: malichite on October 18, 2011, 08:42:52 AM
The original owner of the car wants them back.

Tell him to pay for your time working the door sill and they're his. ;)
Title: Re: Malichite Daily CRX
Post by: SQ is the SQUAD on October 22, 2011, 04:08:34 PM: good start
Title: Re: Malichite Daily CRX
Post by: malichite on October 24, 2011, 10:30:24 AM: Forgot to get pictures, but I did get a little bit of work done this weekend. Being held up waiting for other parts to arrive, but I did get the knuckles all assembled with new wheel bearings, ARP wheel studs, and ball joints. Small bit of progress but progress none the less.
Title: Re: Malichite Daily CRX
Post by: malichite on October 28, 2011, 10:19:26 PM: Teaser

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4253-2%2Fteaser.jpeg&hash=5d8cba64c40231f2f88835ec9f8ad215612fa588)
Title: Re: Malichite Daily CRX
Post by: malichite on October 31, 2011, 11:58:33 AM: ERrr, I hate wiring!

(https://lh6.googleusercontent.com/-KeTszYWS4hE/Tq665fBGRUI/AAAAAAAAAIk/qUeEnoyOn0c/s912/2011-10-31_05-59-20_302.jpg)
Title: Re: Malichite Daily CRX
Post by: jdmhatchracer94 on December 20, 2011, 04:02:10 AM: anything new??
Title: Re: Malichite Daily CRX
Post by: malichite on December 21, 2011, 12:36:02 PM: Got it running a couple weeks ago. Wiring is just laying all over right now. Wanted to make sure it all worked before I started cutting in. Been busy with holiday and new born shit. Hope to get back on it next week. Have most the week off. As far as remaining work, the outside of the car still needs paint, still need to assemble the front suspension. Need to buy brakes for the front. Not sure if I am going to go fastbrakes or just cobble some shit together, or go stock crx stuff.

Also ordered a Wier traction bar kit so I am hoping that will show up soon. Depends on how fast canada post goes I guess.
Title: Re: Malichite Daily CRX
Post by: malichite on December 21, 2011, 02:27:10 PM: Forgot. I also need to figure out springs and shocks situation. Thinking I might just go with the Tokico Blues and Tokico Springs for now. Had them on an old hatch and they were pretty nice for a daily. Will see. Money is adding up quick and this O0 is going broke!
Title: Re: Malichite Daily CRX
Post by: ratcityrex on December 21, 2011, 02:46:25 PM: Ex knuckles, mini cooper rotors, and legend calipers and brackets.
Title: Re: Malichite Daily CRX
Post by: malichite on December 21, 2011, 02:49:57 PM: You have EX knuckles??? I just finished putting fresh ball joints and wheel bearings in the stockers. Hmm, I should take a look at making my own brakets to adapt the legend calipers. I may look at doing the 03 CL calipers on. Supposedly they fit the dx knuckles.
Title: Re: Malichite Daily CRX
Post by: 92CXyD on December 21, 2011, 03:09:50 PM: Quote from: malichite on December 21, 2011, 02:49:57 PM
I may look at doing the 03 CL calipers on. Supposedly they fit the dx knuckles.

If ya find out for sure, post up I'm interested. :noel:

On my '88 CRX Si can I put the mini cooper rotors and legend calipers? Or do I still need adapters?
Title: Re: Malichite Daily CRX
Post by: ratcityrex on December 21, 2011, 05:06:22 PM: Quote from: malichite on December 21, 2011, 02:49:57 PM
You have EX knuckles???

No I dont, But I do have those upper ball joints for a crx, lower ball joints for a da, and those wheel bearings for a da still int he box that I gave to you.
Quote from: 92CXyD on December 21, 2011, 03:09:50 PM
Quote from: malichite on December 21, 2011, 02:49:57 PM
I may look at doing the 03 CL calipers on. Supposedly they fit the dx knuckles.

If ya find out for sure, post up I'm interested. :noel:

On my '88 CRX Si can I put the mini cooper rotors and legend calipers? Or do I still need adapters?

Has to be the hubs that are for the 10.xx" rotors. Like ex/da/dc/eg....ect

As far as the CL calipers I have no idea
Title: Re: Malichite Daily CRX
Post by: jdmhatchracer94 on December 22, 2011, 12:26:32 AM: best upgrade I did was a da booster and mc thats all.
Title: Re: Malichite Daily CRX
Post by: HiProfile on December 22, 2011, 12:00:20 PM: If you have 9.4" knuckles, you can use ITR/Legend calipers & brackets with 10.3" civic rotors.

I'd like to hear more about the mini cooper rotors tho.
Title: Re: Malichite Daily CRX
Post by: ratcityrex on December 22, 2011, 12:30:31 PM: Quote from: HiProfile on December 22, 2011, 12:00:20 PM
I'd like to hear more about the mini cooper rotors tho.

Ask and you shall receive

http://www.team-integra.net/forum/19-projects-diy-article-talk/209631-diy-no-bs-bolt-big-brakes-rs-gs-ls-gsr.html (http://www.team-integra.net/forum/19-projects-diy-article-talk/209631-diy-no-bs-bolt-big-brakes-rs-gs-ls-gsr.html)
Title: Re: Malichite Daily CRX
Post by: malichite on December 27, 2011, 11:32:52 PM: More work on the wiring harness today. Not done yet but getting close.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4282-2%2FIMG_0001.JPG&hash=ef1467e94f22ad4b915fff0b2c6ed0cafe493f3d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4298-2%2FIMG_0006.JPG&hash=1105747f32e7b9e234279cdf46f8afac4ea9027a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4295-2%2FIMG_0005.JPG&hash=575c7619f652b474ed98f5467845d7ad7c06fde8)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4292-2%2FIMG_0004.JPG&hash=687aaf6250842e9ecf629fa7a82a21191528543a)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4289-2%2FIMG_0003.JPG&hash=b13392317d4281f09cad5a5acbb3281e49305b44)
Title: Re: Malichite Daily CRX
Post by: ratcityrex on December 27, 2011, 11:36:15 PM: looks good!!
Title: Re: Malichite Daily CRX
Post by: jdmhatchracer94 on December 28, 2011, 12:06:52 AM: lookin better every pic
Title: Re: Malichite Daily CRX
Post by: malichite on January 10, 2012, 04:13:09 PM: Still fucking wiring. I cant wait to finish this part!

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4316-2%2Fwiring.jpeg&hash=cd62f46616f91a9770f88257176f64725b74b47b)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4319-2%2Fwiring2.jpeg&hash=083685c4b98be999f42a3a1b28f308004b35b747)
Title: Re: Malichite Daily CRX
Post by: JACER63 on January 17, 2012, 08:19:22 PM: fucking hate wiring!! keep up the good work,it is looking good though ..

on the brakes aj suggested, i do have some gsr knuckles, hubs,rotors,and calipers.. thats is if it will work for your project needs.
Title: Re: Malichite Daily CRX
Post by: ratcityrex on January 17, 2012, 10:40:53 PM: He text me some pics last night. Engine wiring harness is done. Just needs to finish up the resistor box. And then do the headlights and all that shit.
Title: Re: Malichite Daily CRX
Post by: jdmhatchracer94 on January 17, 2012, 11:04:36 PM: can't wait to see it
Title: Re: Malichite Daily CRX
Post by: malichite on January 22, 2012, 10:45:55 PM: Got some more work done over the last few days. Finished up the engine wiring harness and got i all hooked up. Hooked up a battery temporarily and she fired up first try so big win there. Also started putting the interior together a little but it is hard to tell. Slowly putting all the wiring back in place and fixing little bits here and there. Also got the new heater core put in and all the blower assembly back in. Lastly, got the new valve cover cleaned up and painted. Next steps are to finish getting the dash put in. Mount the steering rack, come up with some type of cooling system and final install suspension and brakes. Lastly will be paint for the outside.

Engine Harness
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4334-2%2FIMG_0639.JPG&hash=1da136425896ee12078961845904bf9d709375c5)

Inside Shot of the engine harness
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4325-2%2FIMG_0642.JPG&hash=bfb4984e8d115f55fde555c8ca0dba17fe57946c)

Still a big ass mess
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4328-2%2FIMG_0641.JPG&hash=15025f97f604ed19136f85563ee820510bafbb18)

All wired up in running form. Still need to make permanent grounds.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4340-2%2FIMG_0637.JPG&hash=182723c627445c63e32de252fa73fdd0b38ddd91)
Title: Re: Malichite Daily CRX
Post by: crxvtec91 on January 23, 2012, 12:05:47 AM: Do work!
Title: Re: Malichite Daily CRX
Post by: jdmhatchracer94 on January 23, 2012, 12:49:09 AM: awsome
Title: Re: Malichite Daily CRX
Post by: turbohf on January 23, 2012, 12:58:46 AM: looks like that needs some cams and a ported intake manifold....

btw. i have those forsale. :Jew:
Title: Re: Malichite Daily CRX
Post by: malichite on January 23, 2012, 12:59:54 AM: Quote from: turbohf on January 23, 2012, 12:58:46 AM
looks like that needs some cams and a ported intake manifold....

btw. i have those forsale. :Jew:

Fuck, I would love to pick them up from you. Just dont have coin right now :( Still need to buy springs, shocks and brakes for this bitch, plus my first day care bill is due next week.
Title: Re: Malichite Daily CRX
Post by: turbohf on January 23, 2012, 01:01:52 AM: Quote from: malichite on January 23, 2012, 12:59:54 AM
Quote from: turbohf on January 23, 2012, 12:58:46 AM
looks like that needs some cams and a ported intake manifold....

btw. i have those forsale. :Jew:

Fuck, I would love to pick them up from you. Just dont have coin right now :( Still need to buy springs, shocks and brakes for this bitch, plus my first day care bill is due next week.

that didnt have an A6 swap in it by chance? i need a D16A6 for my CRX...
Title: Re: Malichite Daily CRX
Post by: malichite on January 23, 2012, 01:20:23 AM: No, but I have an A6 short block that needs a rebuild. Also have a complete d15 with mpfi shits in it. Could probably piece something together.
Title: Re: Malichite Daily CRX
Post by: HiProfile on January 23, 2012, 10:56:42 AM: OBD2 VC and OBD0 IM? Please tell me you're just waiting on a chris m ported IM and bored TB...

In any case, looks good so far.
Title: Re: Malichite Daily CRX
Post by: Towdogg on January 23, 2012, 12:23:56 PM: Quote from: ratcityrex on December 22, 2011, 12:30:31 PM
Quote from: HiProfile on December 22, 2011, 12:00:20 PM
I'd like to hear more about the mini cooper rotors tho.

Ask and you shall receive

http://www.team-integra.net/forum/19-projects-diy-article-talk/209631-diy-no-bs-bolt-big-brakes-rs-gs-ls-gsr.html (http://www.team-integra.net/forum/19-projects-diy-article-talk/209631-diy-no-bs-bolt-big-brakes-rs-gs-ls-gsr.html)

Ratcity... Have you done this to your car?
Title: Re: Malichite Daily CRX
Post by: ratcityrex on January 23, 2012, 12:28:44 PM: Not yet. In the next month or two I'm gona give it a shot. Worst that can happen is it don't fit and I return the rotor back to the auto parts store. I already have the caliper and brackets.
Title: Re: Malichite Daily CRX
Post by: malichite on January 26, 2012, 12:53:28 PM: Ok, looking at springs and shocks now. Tokico Blues and Tokico Springs, or Skank 2 Shocks and springs...probably not coil overs though. This will be a daily so I want something comfy. I know to tokicos are really nice, but may be willing to look at others.

http://store.skunk2.com/suspension-tuning/sport-shocks.html (http://store.skunk2.com/suspension-tuning/sport-shocks.html)
Title: Re: Malichite Daily CRX
Post by: ratcityrex on January 26, 2012, 01:22:47 PM: I wouldn't go with the skank9 suspension stuff. Ive "HEARD" ::) that its total crap.

Edit: After looking at them they look like kyb gr2's
Title: Re: Malichite Daily CRX
Post by: malichite on January 26, 2012, 04:08:13 PM: Yeah, kind of forgot about the GR2s also. Toss those on the list O0
Title: Re: Malichite Daily CRX
Post by: crxvtec91 on January 27, 2012, 12:00:35 AM: Quote from: malichite on January 26, 2012, 04:08:13 PM
Yeah, kind of forgot about the GR2s also. Toss those on the list O0

Koni and gc is what most crx guys buy.
Title: Re: Malichite Daily CRX
Post by: turbohf on January 27, 2012, 02:11:56 AM: thats a spendy setup tho, 850-1150bucks...
Title: Re: Malichite Daily CRX
Post by: jdmhatchracer94 on February 16, 2012, 01:07:06 AM: anything new? H&R full coils and springs. Put them in a eg the other day and they ride fuckin nice.
Title: Re: Malichite Daily CRX
Post by: malichite on January 13, 2013, 10:44:51 PM: Well, havn't done much in a long time on this, but finally got my lazy ass into the garage today and got it back on all 4s. Have to order some swedged tube to finish the traction bar, figure out brakes, get a new ECU and a few little touches and this bitch is on the road again.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4412-1%2F735644_4622207111110_399813960_o.jpg&hash=84981792203af6a4192c3a921aa622d52801bd99)
Title: Re: Malichite Daily CRX
Post by: ratcityrex on January 13, 2013, 11:23:48 PM: Man, that looks clean....
Title: Re: Malichite Daily CRX
Post by: crxvtec91 on January 14, 2013, 10:46:25 AM: Damn she clean!
Title: Re: Malichite Daily CRX
Post by: malichite on January 21, 2013, 11:32:44 PM: Got some more time on it this weekend. First time I did any welding in 6 months so my welds look like crap but they still hold. Got the traction bar just about complete. Also worked on making new mounts to get the 1/2 width radiator in. Forgot to order jam nuts but those are on orders now. Still have a few welds to finish up but pretty much ready to go.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4420-2%2F2013-01-18_19-18-32_242.jpg&hash=42de52bda0ad109cab2da2e4fa8f897f64bad983)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4426-2%2F2013-01-21_14-44-13_907.jpg&hash=1e49efe82856865682b024b84dccf696df839d5e)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4429-2%2F2013-01-21_14-44-25_908.jpg&hash=a3ab5f2be0b65ab8e147e010975de0b429b1faf9)

Needed to make some new tabs to put the radiator isolators on. Only sheet metal I had was this old computer so I just cut a chunk out of the case.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4432-2%2F2013-01-21_15-03-19_837.jpg&hash=bfff04130390cc31150114d51fe0c5374bd521d4)

roughed in the new tabs for the radiator mounts.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4435-2%2F2013-01-21_15-19-31_923.jpg&hash=ea1aae0a817fd3a3e9763e7ba6a49c0656a643fa)

tabs tacked in for a test fit.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4447-2%2F2013-01-21_16-21-46_167.jpg&hash=24f8efd685adc5c963f93ff053837106edb165f1)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4444-2%2F2013-01-21_16-21-24_566.jpg&hash=07f57d384f92346bf2fe810d20cb3eaf0b4c6336)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4438-2%2F2013-01-21_16-19-35_216.jpg&hash=e05cee055e6a99ba5c0f0dfd89c5f777291bb179)

EG Fan shroud is close but I think it will be enough clearence.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4441-2%2F2013-01-21_16-19-58_185.jpg&hash=7db4f2a54153875428afff08b63f9753297f0d9b)

Still need to make an upper mount but looks like it is supposed to be there
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F4450-2%2F2013-01-21_18-28-15_924.jpg&hash=a41fc90e1bdfbbac310b0030e54083ef71e68689)
Title: Re: Malichite Daily CRX
Post by: turbohf on January 21, 2013, 11:38:46 PM: where you get the rods and stuff for the crossmemeber? my CRX needs one too...
Title: Re: Malichite Daily CRX
Post by: malichite on January 21, 2013, 11:39:50 PM: Speedway motors. They are 1/2" swedged tubes and 1/2" heims.
Title: Re: Malichite Daily CRX
Post by: PhilStubbs on January 21, 2013, 11:48:38 PM: Is that the weir kit? I can't find 2" tubing that isn't crazy expensive to put mine together.
Title: Re: Malichite Daily CRX
Post by: malichite on January 21, 2013, 11:51:39 PM: Yeah, its the weir one. Tube was pretty cheap here.
Title: Re: Malichite Daily CRX
Post by: PhilStubbs on January 22, 2013, 12:14:25 AM: I might just have to nut up and spend the money ordering something online. There is no metal in my area to be found except the shitty Home Depot selection.

I have a JK bar on my turbo EF hatch, but the big block crx needs one and I figure ill put the weir kit on it
Title: Re: Malichite Daily CRX
Post by: ratcityrex on January 22, 2013, 01:03:00 AM: I think weir sells a 1.5" kit now, not the 2". He didnt offer the 1.5" when I got mine for my crx back in the day. Wish i could have got the 1.5" instead.
Title: Re: Malichite Daily CRX
Post by: turbohf on January 22, 2013, 01:07:07 AM: http://www.weir-tech.com/honda/honda-traction-bar-flange-kit-3/8-mild-steel/ (http://www.weir-tech.com/honda/honda-traction-bar-flange-kit-3/8-mild-steel/)

it doesnt say...
Title: Re: Malichite Daily CRX
Post by: ratcityrex on January 22, 2013, 01:30:16 AM: I can tell you that its not the 2" kit. Mine were way larger than that.
Title: Re: Malichite Daily CRX
Post by: malichite on January 22, 2013, 06:22:28 AM: Mine is the 1 1/2. No way it is 2" Still pretty solid though.
Title: Re: Malichite Daily CRX
Post by: PhilStubbs on January 22, 2013, 08:13:26 AM: 1.75" would be perfect cause that tubing is everywhere. I'm sure 1.5-2" are all plenty strong enough. I jack my car up with my JK bar and it doesn't look like it even flexes, I think that's 1.25" square tubing.
Title: Re: Malichite Daily CRX
Post by: crxvtec91 on January 23, 2013, 03:30:08 PM: Quote from: PhilStubbs on January 22, 2013, 12:14:25 AM
I might just have to nut up and spend the money ordering something online. There is no metal in my area to be found except the shitty Home Depot selection.

I have a JK bar on my turbo EF hatch, but the big block crx needs one and I figure ill put the weir kit on it

I used black iron pipe from home depo, it was $15 and SUPER thick! I can jack up the car from the middle of the tube and there is ZERO flex!
Title: Re: Malichite Daily CRX
Post by: PhilStubbs on January 23, 2013, 05:11:48 PM: I couldn't find any the right size. I'll have to look again.
Title: Re: Malichite Daily CRX
Post by: malichite on March 26, 2014, 11:52:02 AM: Well, been a while sense I posted up here. Still slowly working on this pile. Got some time in over the last two days to work on painting it. Sprayed it with 3 coats of high build primer, wet sanded, and put on 4 coats of color. Then started working on the doors and hatch. Will try to get paint on those tonight. Here is where it sits so far.

(https://lh3.googleusercontent.com/-p-vARJHdPjk/UzLynrTbMJI/AAAAAAAAMxk/mv-OP56jRYk/w949-h712-no/IMG_20140324_112521.jpg)

(https://lh5.googleusercontent.com/--jY8QMZmv2M/UzLz2OYLSOI/AAAAAAAAM0U/6qExcLaB_TM/w949-h712-no/IMG_20140324_130757.jpg)

(https://lh3.googleusercontent.com/-1rMMX3bZmQw/UzLyzhIRrcI/AAAAAAAAMx8/nFmVswKsqV4/w949-h712-no/IMG_20140324_130805.jpg)

(https://lh3.googleusercontent.com/-7OyJXRgyS2U/UzLyeOuz1jI/AAAAAAAAMxM/h0Nsgz50N9M/w949-h712-no/IMG_20140324_145313.jpg)

(https://lh5.googleusercontent.com/-Ss7waxue_fU/UzLzpP6BFuI/AAAAAAAAMz8/egjJ3kjdJrM/w949-h712-no/IMG_20140324_164454.jpg)

(https://lh3.googleusercontent.com/-5CeW2TVfA1I/UzLzA-QsMkI/AAAAAAAAMyc/imYY1QiOzYs/w949-h712-no/IMG_20140324_173016.jpg)

(https://lh3.googleusercontent.com/-gFyGqcjgllU/UzLzclldt1I/AAAAAAAAMzk/kIeuqsRbwn8/w949-h712-no/IMG_20140324_173023.jpg)

(https://lh3.googleusercontent.com/-TULFnUZXGtc/UzLyjhHlTuI/AAAAAAAAMxc/L2tqZwn2PFk/w949-h712-no/IMG_20140324_183205.jpg)

(https://lh6.googleusercontent.com/-rcSW3D7wCmY/UzDeRNVEDZI/AAAAAAAAMw4/L42qo0VDKDU/w949-h712-no/2014-03-24)

(https://lh6.googleusercontent.com/-NrqvU3EQYJQ/UzLzs8PNXBI/AAAAAAAAM0E/NSK-aYiwhXs/w949-h712-no/IMG_20140324_193523.jpg)

(https://lh3.googleusercontent.com/-uYcVfgYSmMY/UzLzPWiYT-I/AAAAAAAAMzE/hegfoJCi_-A/w949-h712-no/IMG_20140325_080955.jpg)

(https://lh4.googleusercontent.com/-25EUtAKBKQU/UzLzD2e7RAI/AAAAAAAAMyk/X_EdhtoVpPg/w949-h712-no/IMG_20140325_081010.jpg)
Title: Re: Malichite Daily CRX
Post by: ratcityrex on March 26, 2014, 11:57:15 AM: So fucking clean...... I love it.
Title: Re: Malichite Daily CRX
Post by: 92CXyD on March 26, 2014, 12:16:16 PM: Quote from: ratcityrex on March 26, 2014, 11:57:15 AM
So fucking clean...... I love it.

+1, Looks good :noel:
Title: Re: Malichite Daily CRX
Post by: crxvtec91 on March 26, 2014, 12:55:48 PM: Amazing!
Title: Re: Malichite Daily CRX
Post by: turbohf on March 26, 2014, 12:59:41 PM: I hate those wheels you have on the rear....

crx is looking awesome otherwise. :noel:
Title: Re: Malichite Daily CRX
Post by: malichite on March 26, 2014, 01:02:56 PM: Those came with it. I have Kosie K1s for it (already on the front) Just need to get a key to get the rears off and swapped out. I fucking hate them too.
Title: Re: Malichite Daily CRX
Post by: turbohf on March 26, 2014, 01:05:57 PM: what size tires are those? I could use some 17's if they are good... :Jew:
Title: Re: Malichite Daily CRX
Post by: malichite on March 26, 2014, 01:06:56 PM: 205 40 17 I think. They are not mine. I need to give them back to the guy I got the CRX from once I take them off. I will let him know though. I know he wants to sell the wheels.
Title: Re: Malichite Daily CRX
Post by: malichite on April 05, 2014, 10:28:10 PM: Doors and hatch body worked, painted and hung.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F12825-2%2FIMG_20140405_184702.jpg&hash=d4665b0c301abd99f8a2d91ccae808f8b6907fef)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F12828-2%2FIMG_20140405_184710.jpg&hash=6b7e4768ea7eaa63aa5fa2e616278c302ff0d398)
Title: Re: Malichite Daily CRX
Post by: ratcityrex on April 06, 2014, 01:57:56 AM: Looks good man. I need to get my gas tank down to you so we can tig up the sump. Are you gonna have this thing ready for the dyno day?
Title: Re: Malichite Daily CRX
Post by: malichite on April 06, 2014, 02:02:14 AM: I'm trying. That's my goal
Title: Re: Malichite Daily CRX
Post by: malichite on April 06, 2014, 12:03:46 PM: When do you want to bring that debauchery down so we can get it welded up? :mexi:
Title: Re: Malichite Daily CRX
Post by: ratcityrex on April 06, 2014, 12:07:53 PM: I got to pull the tank and wash it really good b4 i bring it down because the last thing I want to do us weld in a tank with fumes in it and blow our selfs up....lol
Title: Re: Malichite Daily CRX
Post by: malichite on May 26, 2014, 08:52:21 PM: Just drove this POS for the first time. Only drove it about 5 feet but hey, thats progress. Got the not charging issue and oil pressure issues figured out. Need to hook up the fan and brakes and hopefully take it out for a ripper.
Title: Re: Malichite Daily CRX
Post by: turbohf on May 26, 2014, 10:00:39 PM: ;DDD
Title: Re: Malichite Daily CRX
Post by: malichite on May 26, 2014, 10:05:49 PM: It WILL be at the dyno day :noel:
Title: Re: Malichite Daily CRX
Post by: ratcityrex on May 26, 2014, 10:44:05 PM: What was the charging issue?
Title: Re: Malichite Daily CRX
Post by: malichite on May 26, 2014, 11:42:40 PM: Moar grounds!
Title: Re: Malichite Daily CRX
Post by: malichite on July 01, 2014, 05:48:23 PM: Ok, this piece of shit is finally on the road. Made it to the dyno day and did Meh on the stock b18. Only issue right now that is driving me crazy is a nasty vibration when I accelerate or turn one way. Bushings, Ball joints, wheel bearings are all new. Thinking it's the axles so I got to get up to ratcityrex to get them swapped out. Hoping to work the rest of the bugs out over the next month, then it's time to start building a manifold..... :)
Title: Re: Malichite Daily CRX
Post by: malichite on July 01, 2014, 05:56:26 PM: Here is it's current state

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F13608-2%2F20140621_203734.jpg&hash=14ae508b7271c167d156f64b772f5dcd4ecf62d7)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F13611-2%2F20140621_203755.jpg&hash=6d74bd36c8f4c805a70642e4c7c0cf38fa50596e)
Title: Re: Malichite Daily CRX
Post by: ratcityrex on July 02, 2014, 11:31:18 AM: Kosi's look good. Come grab my lifetime receipt from the auto parts store and we will swap them out. Everyone around me has gotten free axles....lol. I have 3 different lifetime axle receipts. Hydro b series, cable b series, and cable d series.