:::RHMT::: Real Home Made Turbo
General Category => Forced Induction => Topic started by: danz on August 11, 2012, 02:58:46 AM
-
so a lot of you dont make it over to d-series.org so i figured id post this shit up here so you all could check it out
plan is a non-vtec d15b2 setup with a pm3 head. and a colt cam i got for free in a motor i got for free. turned out to be overbored to 76mm so i couldnt use it (lol what are the odds)
ebay turbo. home made mild steel manifold. mig welded. mild steel charge piping. dsm BOV. hopefully some hiprofile injectors. all the shit that makes shit awesome. ebay tial knockoff WG. etc etc.
got some forged rods from FJT for testing, and some vitara pistons from a homie on honda-tech of all places. NovisSomethingOrother. tricky name, but nice guy.
rods in
(https://lh3.googleusercontent.com/-AQXdRrsYuao/UBWqoeG8hGI/AAAAAAAAD8g/FqXkrHqzsi0/s800/02232011107.JPG)
bosch fuel pump in tank like a muhh
(https://lh6.googleusercontent.com/-yFmPWuRjVCQ/UBWmVVSnmCI/AAAAAAAAD6w/QALuc43iT8M/s800/Bosch%2520fuel%2520pump%2520install%2520028.jpg)
DIY port job
(https://lh4.googleusercontent.com/-IAyBWnePUvg/T9jBRVIiAQI/AAAAAAAAD0w/O0zzFyIaMG8/s800/06102012674JPG_.JPG)
(https://lh6.googleusercontent.com/-6xXIfTl8iCY/T9jBQ76qLJI/AAAAAAAAD0g/68SMBqjwZoQ/s800/06102012676JPG_.JPG)
(https://lh6.googleusercontent.com/-34g7qYJVmlQ/T96oqbnWpAI/AAAAAAAAD2o/TDse28oxo2o/s800/_DSC9751.JPG)
(https://lh3.googleusercontent.com/-9m8Zbo6k7NU/UBWwyTlgZ3I/AAAAAAAAD9Y/CZpa5C8lFQY/s800/_DSC9760.JPG)
(https://lh5.googleusercontent.com/-ClaD1jY_Ix4/T96oq2xzNEI/AAAAAAAAD2w/Ef2sb4z7020/s800/_DSC9748.JPG)
reworked CC
(https://lh4.googleusercontent.com/-M9OkLQ3RrxY/UBWofgxEWxI/AAAAAAAAD8A/3j749pIBqc8/s800/2012-07-28%252001.06.09.jpg)
(https://lh5.googleusercontent.com/-FjZPHwFpP7A/UBWoeBE7qSI/AAAAAAAAD7o/2cp9l2ZScEg/s800/2012-07-28%252001.05.42.jpg)
.095 milled off the head. should give me about 9:1 CR with vitaras on the D15 setup with pm3 head.
(https://lh3.googleusercontent.com/-iZ2B_siAcN0/UCV66-GaZSI/AAAAAAAAD_g/GeoIzMSKxWk/s800/IMG_1467.jpg)
collector jig for manifold collectors. took 15 minutes to make.
(https://lh4.googleusercontent.com/-DL9uoeBBqIw/T_skJcqfqUI/AAAAAAAAD3Y/eHJwOiMooik/s800/06302012705.JPG)
(https://lh3.googleusercontent.com/-Oa4cXYL-A2s/T_skJaFGG1I/AAAAAAAAD3Q/qvJuLos4SKs/s800/06302012708.JPG)
my friend darin and i (farmyard crew what haha) got busy and started tacking shit up. i wanted to use a full rad, fuck overheating in traffic. that was my biggest problem with my old holset 10 sec setup.
so i made a mini ram
(https://lh4.googleusercontent.com/-nPaPxzY8n28/UBWg5OI62TI/AAAAAAAAD6I/uXM8LqdP-4M/s800/07102012710.JPG)
(https://lh6.googleusercontent.com/--JGcIbXItYc/UBWg6PwkCSI/AAAAAAAAD6Y/ETGVcr-nQ-8/s800/07102012712.JPG)
(https://lh5.googleusercontent.com/-VkAGzrjW3L4/UBWf5Oqrc4I/AAAAAAAAD44/UD6e6RYDC38/s800/07102012714.JPG)
(https://lh6.googleusercontent.com/-HEge-BQVnmg/UBWf7ufKsdI/AAAAAAAAD5Y/BERYf-2zAIs/s800/2012-07-20%252022.18.23.jpg)
(https://lh3.googleusercontent.com/-6fvr06MlAcA/UBWf5-GCeAI/AAAAAAAAD5A/oSuW9qpd5J0/s800/2012-07-20%252022.19.21.jpg)
gangster oil drain flange/fitting i made so the oil drain would work. basically slit the fuck outa some 5/8ths .065 wall ERW and pinched it in a vice then laced it with weld to seal it up. worked like a champ.
(https://lh3.googleusercontent.com/-vrqX9N5nrz8/UBWogZyUKkI/AAAAAAAAD8Q/_Ae17Q8KI_s/s800/2012-07-28%252022.01.31.jpg)
and a fully assembled shot, with the RT4WD oil cooler installed as well
(https://lh5.googleusercontent.com/-_lxOH7lnCRQ/UCNDmuiTIfI/AAAAAAAAD-4/CgE_CRkoipc/s800/2012-08-07%252022.47.19.jpg)
gonna use the ebay turbo and see how it goes. waiting on the head back from the machine shop, needs some new exhaust valves so ill get them to the shop and ill get the head back and toss it all together
then its waiting on hiprofile to send me some injectors so i can start tuning and helping him make some loot. haha
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fnaked-galls.info%2Fwp-content%2Foriginal%2F2012_04%2FFiery-blonde-babe-with-tasty-pussy-and-hot-tits.jpg&hash=7d04c65c991a909d34a0daf548a6130678f0f2bc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fftop.ru%2Flarge%2F201206%2F33740.jpg&hash=8a2c836c4a13c844ec5504ab7cbe19c9f369302c)
-
thats awesome. you will get lots of life out of that ebay turbo if you stay 10psi or less. since you want 300whp i know you arent. you will get 3-4 months out of that turbo if you drive it daily
-
looking good poopsie :)
-
FUCKING WINNING!
-
Fuck yea, I want to see this thing RIP!
BTW I just realized that fuel pump is bigger then my walbro 400!
-
Hey Danz:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg163.imageshack.us%2Fimg163%2F4203%2Fev1401.jpg&hash=4b75c8b329f8380976e164bd130f22ab1ce0fec5)
That is all. ;)
-
Hey Danz:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg163.imageshack.us%2Fimg163%2F4203%2Fev1401.jpg&hash=4b75c8b329f8380976e164bd130f22ab1ce0fec5)
That is all. ;)
Well played. lol.
-
Hey Danz:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg163.imageshack.us%2Fimg163%2F4203%2Fev1401.jpg&hash=4b75c8b329f8380976e164bd130f22ab1ce0fec5)
That is all. ;)
Well played. lol.
-
paid up mah fucka. cant wait to get the injectors then i can start it
the head is ready to pick up, as well as a lightened flywheel
also got some ARPs ready to pick up.
already got the head gasket and shit. gotta grind down the dowels if they are too tall and then slap it together with the colt cam.
-
Do you plan to clay the motor to see where the limits are?
-
Do you plan to clay the motor to see where the limits are?
nah. if i decide to play with the cam timing ill just advance/retard till it hits something, and then ill pull back a few degrees. hah :D
well maybe ill clay depends how i feel when its going together and if i have clay around i guess more so than anything.
-
Do you plan to clay the motor to see where the limits are?
nah. if i decide to play with the cam timing ill just advance/retard till it hits something, and then ill pull back a few degrees. hah :D
well maybe ill clay depends how i feel when its going together and if i have clay around i guess more so than anything.
if your kid has play-doh, steal it and use that.
-
whatever happened to fjt I dont see their website up anymore
-
whatever happened to fjt I dont see their website up anymore
He ran into a lot of problems and back off for now.
-
pics of the hiprofile injectors. cant wait to try em out. im pretty stoked.
nog email me the offsets dont make me do it the hard way!! lol
(https://lh3.googleusercontent.com/-xU_iFSmdeYM/UDbw4KJM1RI/AAAAAAAAED4/daClaUuIyBs/s800/Aug%252023%252C%25202012%2520007.jpg)
(https://lh5.googleusercontent.com/-mzmnUn6LkUU/UDbw39hLf-I/AAAAAAAAEDw/hEzzrua5uQs/s800/Aug%252023%252C%25202012%2520009.jpg)
(https://lh3.googleusercontent.com/-t0yNw1a27Fs/UDbw3GyUiVI/AAAAAAAAEDs/Q42W_EzGq1w/s800/Aug%252023%252C%25202012%2520010.jpg)
(https://lh5.googleusercontent.com/-wj-hDMUi2n4/UDaMHFHGTOI/AAAAAAAAECw/5xx4efsU2FE/s800/2012-08-22%252021.00.02.jpg)
(https://lh4.googleusercontent.com/-pYYOymWiUc4/UDaMH_NyuJI/AAAAAAAAEC4/h1ooDRPaYKU/s800/2012-08-22%252021.14.29.jpg)
(https://lh6.googleusercontent.com/-HkE2ndQsQuQ/UDaMIzfAKJI/AAAAAAAAEDI/8H0ohETrq7Y/s800/2012-08-22%252021.33.00.jpg)
(https://lh3.googleusercontent.com/-EC4Km9cZRss/UDaMGDdITNI/AAAAAAAAECg/251mWD9WNqQ/s800/2012-08-22%252020.56.30.jpg)
(https://lh3.googleusercontent.com/-OQSAR0DDPIs/UDaMGlCKAWI/AAAAAAAAECo/tXNdPn0jkgo/s800/2012-08-22%252020.56.06.jpg)
(https://lh3.googleusercontent.com/-ThigL4FLyec/UDVooPjJx3I/AAAAAAAAEBo/-7NV7nFELtc/s800/2012-08-21%252022.58.12.jpg)
-
Do work son!
;DDD
-
Fuck yeah!
-
these obx lsds are junk i cant even run a shim the clearance is .014 without one. wtf?? lol
-
it runs bitches.
forged d15b2 vitara turbo build start up video (http://www.youtube.com/watch?v=mQmcGKK3WWc#)
plus, DIY garage balanced light weight flywheel.
O0
(https://lh3.googleusercontent.com/-f3QICMpWNz4/UET7iYrdfrI/AAAAAAAAEGM/I7rVk_X_SOg/s800/2012-09-02%252019.08.33.jpg)
-
A+ for the balance.... an old tire balancer does wonders. Most peeps do it diy and wonder why it vibrates =)
Good to see your pushing the limits once again =)
-
i had the machine shop surface off as much as they could so its around 13lbs or so. it could be lighter but i am happy.
i balanced it then i put a stock flywheel in the balancing rig after mine was done, and the stock one was so fucked. it had an even worse heavy spot than the light one did before i balanced it. lol
-
i had the machine shop surface off as much as they could so its around 13lbs or so. it could be lighter but i am happy.
i balanced it then i put a stock flywheel in the balancing rig after mine was done, and the stock one was so fucked. it had an even worse heavy spot than the light one did before i balanced it. lol
I found the oem fw part funny since you where able to balance it better :noel:
-
flywheels holding up well so far.
got like 2000km on the build, ripping it on 6psi right now. gonna toss the 3 bar on sooner or later then turn it up a bit.
heres a me-he-co ripper
Turbo D15B2 pull (http://www.youtube.com/watch?v=k_V1m4r4D4k#)
also modified the clutch cable to delete the bullshit rubber bushing on the end of it. im sure it made things a nightmare since the clutch is so stiff. also extended the top of the clutch pedal for a bit more throw on the cable. clutch is MUCH better now and the TOB doesnt have to be riding on the clutch 100% of the time as it did before.
(https://lh3.googleusercontent.com/-WuXrBZhyFo0/UHNAUToKwqI/AAAAAAAAEUU/IZUd3-25dvw/s800/2012-10-08%252011.38.48.jpg)
(https://lh3.googleusercontent.com/-2MUZhsHFtC0/UHS49uAwGPI/AAAAAAAAEU4/UbfWiSe3rHw/s800/2012-10-09%252016.01.36.jpg)
(https://lh5.googleusercontent.com/-p8dkmWNOOLA/UHS4-OBE72I/AAAAAAAAEVA/K61tQ79Y12g/s800/2012-10-09%252016.25.17.jpg)
(https://lh4.googleusercontent.com/-FaCkn4zEYOI/UHNAU33pTBI/AAAAAAAAEUc/XzrFHFWaN1g/s800/2012-10-08%252011.35.38.jpg)
(https://lh3.googleusercontent.com/-U7cbykRYN1c/UHHJBa84YeI/AAAAAAAAETw/Pmr1MilWCHg/s800/2012-10-06%252018.24.13.jpg)
(https://lh5.googleusercontent.com/-ubTDUPtJkBU/UGuhEn1rbyI/AAAAAAAAESA/-JkMttsYP2o/s640/2012-10-02%252018.33.51.jpg)
future muffler.
(https://lh4.googleusercontent.com/-DkPOtxOiIuI/UGEI46tP3JI/AAAAAAAAEMQ/2gcHKZ0GUsA/s800/2012-09-22%252018.41.40.jpg)
-
Clean hatch.
-
Your oil cap is pretty clever. I like!
-
oil cap is gone... come up to mission raceway some time next year, remind me, and its yours! ;DDD
-
oil cap is gone... come up to mission raceway some time next year, remind me, and its yours! ;DDD
So is that in Canada or on this side of the boarder?
-
Mission is in Canada. Super close to the border, 10 mins from the border.
PS, the diy balanced flywheel still working to this day! lol
Sorry about the pics.
-
Heres some pics of the car and shit so this thread at least makes a little sense.
(https://lh6.googleusercontent.com/-zzlWe1d82Lc/UitbqFS-bUI/AAAAAAAAFwk/H_-8vegEM9I/s800/IMG_20130906_180847.jpg)
(https://lh3.googleusercontent.com/-EPJJRKIP1bQ/Uewf9LuGllI/AAAAAAAAFkM/zwPSCRcYuDo/s800/July%252021%252C%25202013%2520002.jpg)
Paint cut polish. DIY of course. 3m rubbing compound and medium foam pad on PC7424
(https://lh6.googleusercontent.com/-gNe1MHWRs8o/UiaNYzksK4I/AAAAAAAAFpE/BISR5JLdR3w/s800/IMG_20130903_182232.jpg)
(https://lh4.googleusercontent.com/-5A2HToku27Y/Uitbs9y9riI/AAAAAAAAFp0/N4_90iTG-YU/s800/IMG_20130906_180903.jpg)
(https://lh5.googleusercontent.com/-Ov86ky5Ko5Q/Uewf6Uyr8aI/AAAAAAAAFkE/TWtz6vZVlaQ/s800/July%252021%252C%25202013%2520011.jpg)
The setup
(https://lh5.googleusercontent.com/-MI1uSUyMdRg/Uewf8IHIM3I/AAAAAAAAFjI/ueHj7xgNBIY/s1280/July%252021%252C%25202013%2520007.jpg)
First problem. Blown HG. I had it tuned SUPER agressive, trying to hit 11's on 12psi on a 1.5L non-vtec... then I left that tune on, it was running WICKED, but got super cold one dry night, pavement was warm still, air super cool and dry, racing a porsche up a 14% hill, and well... you know.
(https://lh6.googleusercontent.com/-bkG9BjaLHh0/UlmV6zQ9QTI/AAAAAAAAF3g/pZICZfWQngw/s800/IMG_20131011_185421.jpg)
(https://lh3.googleusercontent.com/-HeZ3mSBM7DI/UlmV7oTH9CI/AAAAAAAAF3o/Xts8oYhKnr8/s800/IMG_20131011_184445.jpg)
What the pistons carbon looks like. I dont like it.
(https://lh3.googleusercontent.com/-QnAjukBA5Ak/UlmV-p2vpeI/AAAAAAAAF4A/OF4RNwMjP_I/s800/IMG_20131011_184514.jpg)
I know you egg nogs will like this.
Nylon reinforced muffler support buffers. :)
(https://lh4.googleusercontent.com/-DQp_6-khsyM/Udtzga_3t-I/AAAAAAAAFg4/v1T6e1zW9zQ/s800/IMG_20130707_170350.jpg)
-
Oh and this little innovation on my 10 second race car turned winter beater.
Race mount. LOL
Threaded a cut up boost coupler through a hole i drilled through the rubber
(https://lh6.googleusercontent.com/-xSx8TY8QOEE/UnaWogZ93JI/AAAAAAAAF-I/ZI1wxJEtZj8/s1280/IMG_20131102_171129.jpg)
(https://lh4.googleusercontent.com/-wyrAVeUJqac/UnaWnCAdE9I/AAAAAAAAF94/-y4cvgG0ucU/s1280/IMG_20131103_090604.jpg)
(https://lh4.googleusercontent.com/-DNOgnoVNCI4/UokE2ZuNEuI/AAAAAAAAF_8/nF80LliQNoA/s1280/IMG_20131116_153703.jpg)
(https://lh3.googleusercontent.com/-_KBTBXHNTos/UokExTy4AYI/AAAAAAAAF_M/FMxKPvRfxSM/s800/IMG_20131116_153821.jpg)
And a sweet air block off plate I made for MPG.
(https://lh4.googleusercontent.com/-tKaQa1NBKew/UokE4blNZ2I/AAAAAAAAGAM/7dvur5utd_E/s800/IMG_20131116_153635.jpg)
(https://lh3.googleusercontent.com/-pob4xx3q9Lw/UokEzl3rVBI/AAAAAAAAF_k/sc0ZB_g9Opo/s800/IMG_20131116_153625.jpg)
(https://lh4.googleusercontent.com/-BWZTMsf9Qzc/UokE3hDQLtI/AAAAAAAAGAE/GcwtUCMQ3aY/s800/IMG_20131116_153718.jpg)
-
I like this post
-
That poor car is begging for a swap!
-
Yeah once JD answers all my n00b questions, then I can make the F swap happen.
;)
-
I like this build :noel:
-
Ok so heres the pics of the head work again. I rehosted them so I might as well share.
I'll try to post them in order but some might be mixed up.
(https://lh4.googleusercontent.com/-mgcw-BCZi24/UktKN1ApeQI/AAAAAAAAF2A/XEuX2H-uTZU/s800/06102012674.JPG)
(https://lh6.googleusercontent.com/-nl2dRit1gG4/UktKNLb-4dI/AAAAAAAAF14/l-vLDQUE1ws/s800/06102012675.JPG)
(https://lh3.googleusercontent.com/-JeGjPGnwPJE/UktKMaRqx_I/AAAAAAAAF1w/D0Kz7RR3e5c/s800/06102012676.JPG)
(https://lh3.googleusercontent.com/-SG7LPQsSMmg/UktKLyOMHNI/AAAAAAAAF1o/I5VU3kXHYno/s800/06162012692.JPG)
(https://lh6.googleusercontent.com/-VABRpbLYPRU/UktKLUHdqAI/AAAAAAAAF1g/q6HxA93Rebk/s800/06162012694.JPG)
(https://lh6.googleusercontent.com/-EJQZWx4GIp4/UktKKqBoPZI/AAAAAAAAF1Y/gdDBjteqYRE/s800/06162012697.JPG)
(https://lh3.googleusercontent.com/-L4QKnzU13dg/UktKJ3BQaII/AAAAAAAAF1Q/9-SiJPdL6UU/s800/06162012698.JPG)
(https://lh3.googleusercontent.com/-EHN7ZZcF1rs/UktKJM3rm1I/AAAAAAAAF1I/RrenXYa355I/s800/06162012699.JPG)
(https://lh4.googleusercontent.com/-Cnu2nnjNYoU/UktKIb9z5mI/AAAAAAAAF1A/XrL22ihR3wM/s800/06162012700.JPG)
(https://lh4.googleusercontent.com/-Cnu2nnjNYoU/UktKIb9z5mI/AAAAAAAAF1A/XrL22ihR3wM/s800/06162012700.JPG)
(https://lh3.googleusercontent.com/-5XKSwAEBiOA/UktKG23goYI/AAAAAAAAF0w/gcm-aPlUKjo/s800/2012-07-28%252001.06.02.jpg)
(https://lh4.googleusercontent.com/-hQx2zYYNsAA/UktJtEnoNZI/AAAAAAAAFyY/4VCnfnEzsVo/s800/_DSC9762.JPG)
(https://picasaweb.google.com/lh/photo/KIgFnl7ULls9x2FOPTQZBqWS8lAhdOt2aUlEPXUuARw?feat=directlink)
(https://lh3.googleusercontent.com/-LseKob-Jssk/UktKGTo2eVI/AAAAAAAAF0o/SNybc5L4lCw/s800/2012-07-28%252001.06.09.jpg)
(https://lh5.googleusercontent.com/-Vye2C9LUp54/UktKFSmMN_I/AAAAAAAAF0g/La5Fi3_hNfI/s800/IMG_1467.jpg)
(https://lh4.googleusercontent.com/-SptPoIEkyZo/UktKDFH4UyI/AAAAAAAAF0Y/LyGPDB-VKIM/s800/2012-08-22%252021.00.02.jpg)
(https://lh6.googleusercontent.com/-NNGeN6eGjUA/UktJvHcShQI/AAAAAAAAFyo/0j_F7zTuzCI/s800/_DSC9765.JPG)
(https://lh4.googleusercontent.com/-KX3I8X3NJzE/UktJvlOmLeI/AAAAAAAAFyw/6OgwU9ay_3w/s800/_DSC9766.JPG)
(https://lh6.googleusercontent.com/-7UU1RE_mvxI/UktJwXuRm8I/AAAAAAAAFy4/JnURO83Pm_c/s800/_DSC9743.JPG)
(https://lh4.googleusercontent.com/-av3GtkN2aXM/UktJxHTEhMI/AAAAAAAAFzA/UAq6w91AWWs/s800/_DSC9744.JPG)
(https://lh4.googleusercontent.com/-yKtgJKbHWUA/UktJx3sR3ZI/AAAAAAAAFzI/BmTUncfE8K8/s800/_DSC9745.JPG)
(https://lh6.googleusercontent.com/-3grk3u8nd-c/UktJymEQlpI/AAAAAAAAFzQ/4vDfB5p-NP0/s800/_DSC9746.JPG)
(https://lh5.googleusercontent.com/-m1m0NEigc-g/UktJzJU1EdI/AAAAAAAAFzY/Wqn_RQ_1gR0/s800/_DSC9748.JPG)
(https://lh5.googleusercontent.com/-Yh8S74QEBg8/UktJ0CVFnNI/AAAAAAAAFzg/08k__T1Fy84/s800/_DSC9751.JPG)
(https://lh3.googleusercontent.com/-mSpCENya9lw/UktJ0o0hWCI/AAAAAAAAFzo/_8C3JO4qAZA/s800/_DSC9752.JPG)
(https://lh6.googleusercontent.com/-ZvJ7sG9qUt8/UktJ1a09-QI/AAAAAAAAFzw/qAKT-sI9Z6Y/s800/_DSC9753.JPG)
(https://lh5.googleusercontent.com/-yvx-YqbYuDs/UktJ18g-1dI/AAAAAAAAFz4/9FPADdUV9tM/s800/_DSC9754.JPG)
(https://lh4.googleusercontent.com/-x4aYoscIpIY/UktJ2rlSQoI/AAAAAAAAF0A/KOaaymC3PuI/s800/_DSC9755.JPG)
(https://lh4.googleusercontent.com/-_FxWlWvGseg/UktJ3L7ce8I/AAAAAAAAF0I/rtEjaLoH9qM/s800/_DSC9756.JPG)
(https://lh4.googleusercontent.com/-XefYT648yAw/UktJ33x9JTI/AAAAAAAAF0Q/tOSgHqGcI00/s800/_DSC9759.JPG)
-
Lol i just realized that cylinder head was cast in 1987. Lol!! Almost as old as me but a few years off still. Lol.
-
How much did you take off when resurfacing it? Looks like a huge amount
-
.095 milled off the head. should give me about 9:1 CR with vitaras on the D15 setup with pm3 head.
Fuck you Scott. :-*
If you do put an F22 with a K20 IM in that car, post pics on DSO w/o captions. I want to see their responses. "Why does that B7 valve cover look so weird?" "Your IM is on upside down..."
-
Man, reading is kicking my ass lately.
-
DSO will see the F2B2K engine. Most guys there are pretty smart and will figure it out quick. Its the local kids that will have no idea why I have a single cam GSR. Lol.
-
Given th displacement I'm sure one could run 10s on pump 93!
-
Its the local kids that will have no idea. Lol.
Aint that the truth.
-
Drove it again today.
Honestly it has more torque everywhere than the stock Z6 that I had in my EK that I just sold.
And when it spools up, its so fun. Hahaha. Oh man the F22A is gonna be sick but this is pretty good too. :D
-
This should be going in before 2015. :)
(https://lh4.googleusercontent.com/-upB9HYJFUZk/UyZMKK7ppBI/AAAAAAAAGpk/DKpUCNpzo9w/s800/March%252016%252C%25202014%2520010.jpg)
-
what manifold is that? :noel:
-
Thats a K series PRB IM on a F22Ax head ???
-
Thats a K series PRB IM on a F22Ax head ???
Oh shit, I knew that!! :?: :-\ :'( 8) :noel:
-
Looking tasty!
-
Better than cheap cheeseburgers..
-
Haha never got a chance to brag about this in here.
But.... flux cored pie cuts ftw.
(https://lh4.googleusercontent.com/-JVkfW3Z_efw/U0H3KgLsYMI/AAAAAAAAGxo/IoHLX-2Hatg/s800/April%252006%252C%25202014%2520015.jpg)
-
Haha never got a chance to brag about this in here.
But.... flux cored pie cuts ftw.
(https://lh4.googleusercontent.com/-JVkfW3Z_efw/U0H3KgLsYMI/AAAAAAAAGxo/IoHLX-2Hatg/s800/April%252006%252C%25202014%2520015.jpg)
ghetto fab FTW. Love it ;DDD
-
17psi. Knocked like a mother fucker and made more power than this, but this is what it made without any det. The little engine is hurting for more octane. 94 pump gasonline.
(https://lh4.googleusercontent.com/-UQxM5SdTZss/U-AjYTIqBwI/AAAAAAAAHLg/pfMzfTfgIVw/s800/304.4whp%2520dan%2520d15b2.jpg)
6psi. Pretty rad for 6psi. Linear as fuck!
(https://lh6.googleusercontent.com/-g_74Pe1_K1w/U-AjXovPheI/AAAAAAAAHLY/kHzgJZGyWK4/s800/204whp%25206psi%2520d15b2%2520dan.jpg)
-
Water/Meth in the future? :noel:
-
Very possible. I will probably do water meth if I can get a kit for free to super cheap. Or I will just pour meth in the gas tank. Maybe even go and pick up a few jugs of E85...
-
Track opened last night, and I forgot my helmet. Damn! Next time.
-
Better picture of pie cuts. Lol
(https://lh3.googleusercontent.com/-cBgrgltGO90/U0tN7UeeJaI/AAAAAAAAGzw/jj8eWkpyugg/s800/April%252013%252C%25202014%2520013.jpg)
(https://lh3.googleusercontent.com/-QQCrbXb73S4/U0tN9t8dk3I/AAAAAAAAGz4/xa6ZMZoWPuQ/s800/April%252013%252C%25202014%2520011.jpg)
(https://lh3.googleusercontent.com/-GNr2dpxgO70/U0tN__uQetI/AAAAAAAAG0A/fo6FNuad1KU/s800/April%252013%252C%25202014%2520010.jpg)
-
Pie cuts are fucking gangster. Love the whole build.
-
what turbo is on this?
-
Chinese "57trim" I believe
-
what turbo is on this?
Genuine Garret T3/T4 50 trim .60 AR compressor housing, .63AR 4 bolt turbine housing stage 3 wheel.
Changed the oil. Crushed the DSM BOV a bit more with my finesse hammer. Should be good for 20psi or so now. Still contemplating how I will add octane. Next friday the track is open.
-
Can't you buy those octane booster at canadian tire? Few bottles, full 94 tank from petro, absolutely unknown octane rate, profit. :noel:
-
Order up a case of www.race-gas.com (http://www.race-gas.com)
-
Trying to put together a water meth tank for free to cheap. Will probably make the reservoir out of stainless steel. Just need a pump and controller and nozzle. lol.
-
This took for fucking ever. Never again.
(https://lh5.googleusercontent.com/-_Yo7bjVsIzU/VAUHuiphMZI/AAAAAAAAHNs/uzQBb_05uVU/s800/IMG_20140901_161942.jpg)
(https://lh4.googleusercontent.com/-sEWNbBfGsuE/VAUHypaQnoI/AAAAAAAAHN8/9iQyS8WBaQk/s800/IMG_20140901_161901.jpg)