:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: turbohf on January 06, 2014, 12:25:14 AM
-
SET YOUR CALENDER!!!
June 7th 2014
NEW LOCATION THIS YEAR
Rich Tuned
3420 C st NE #405
Auburn, Washington 98002
click for directions (https://maps.google.com/maps?oe=utf-8&client=firefox-a&channel=rcs&q=3420+C+st+NE+%23405+Auburn,+Washington+98002&ie=UTF-8&hq=&hnear=0x549058e33ad805fd:0xec3349fcaa8e67bc,3420+C+St+NE+%23405,+Auburn,+WA+98002&gl=us&ei=Xxc-U6GhIs-GyQHfoYCYAg&ved=0CCcQ8gEwAA)
10:00 am - 6:00 pm
2wd Dyno Dynamics
$50 for 3 pulls
Bring your shitboxes tuned. Highest power this dyno has seen is 888whp. Lets see if one of you nogs can beat that!! :noel:
who is gonna run 10000% forsure?
Any questions or concerns or whatever that isnt covered here, let one of us know!
i will be updating this as updates come in
COST: FREE to come and hang out. please bring some food, drinks, etc... DYNO will be $50 for 3 runs. you need more that 3 runs, or your car is gonna be a bitch, lmk before hand and you will be towards the end. please have your car dialed before hand.
i will have "RealHomeMadeTurbo.com" stickers.
not 100% how its gonna work, or even the cost on them... I WANT ONE OF THESE ON EVERY CAR AT THE MEET! im gonna pay for these out of my pocket. think ill give one out, if you want more or color, gonna be like couple bucks each?
ill have glass cleaner and towels on hand for application of stickers :-*
so bring some extra cash for beer runs, burgers, sparkplugs, side bets, hookers, etc...
the dyno at the shop is a Dyno Dynamics (2WD)
TUNER: bring your car tuned!... im sure the master tuner LEED will be in the house for "tuning advice".... im sure others will be on hand for tuning advice also. lmk, and ill add your name to the list?
NO DRUGS. hit that shit up before/after. this is a place of business
PICK UP YOUR TRASH, BE RESPECTFUL.
COPS: Auburn, Kent, Renton & State Patrol PIGS are all up in the area. and love to pull people over. BE CAREFUL
WHO IS GONNA BE ON THE ROLLERS:
turbohf ~ turbo DC4 Integra
jdmhatchracer94 ~ turbo'ed something
ratcityrex ~ 66 NOVA!
ratcityrex ~ turbo integra
bigdaddyvtec ~ white power
92_gsr_c1 ~ turbo Integra 4dr
chevy ~ turbo 1g CRV
Jace63 ~ TT-383 NOVA!
WHO IS ALL FOR SURE SHOWING UP?
turbohf + couple others
jdmhatchracer94
ratcityrex + others
bigdaddyvtec
chevy
92_gsr_c1
Jace63
LEED
-
I'm in runing one engine or another
-
Ill bring the Truck and the car.... Run both. The truck should be making a little ower by then Id think... Almost all the bases are covered minus a fuel pump setup now to put it on EFI and make some power.
-
Maybe I will do my truck with the 454 and see what she does
-
Come on, You know I'm down to be there with the same crew of people I bring with me every year.
-
Tell them to bring some thing to dyno. Throw a kit on blue da
-
Tell them to bring some thing to dyno. Throw a kit on blue da
I'm gonna try and pick some stuff up for the nova next month. Hope I can get a tpi setup and some headers. If no headers then I'm gonna try and Scoop A turbo for it.
-
There ya go
-
Bump. Lets get this shit planned!
-
I actually wanna break 450+ this year and I will
-
Well, then make sure you put a fire ring back in your waste gate so you can actually make some boost.
-
How deep into WA will I have to drive? Might bring the turbo D15 and put down more than you all with only 1.5L of displacement. haha.
-
Well, then make sure you put a fire ring back in your waste gate so you can actually make some boost.
Ya I thank Ryan for that one
-
How deep into WA will I have to drive? Might bring the turbo D15 and put down more than you all with only 1.5L of displacement. haha.
lynnwood, wa 98026
-
How deep into WA will I have to drive? Might bring the turbo D15 and put down more than you all with only 1.5L of displacement. haha.
I wanna see the d15 do work
-
Well, then make sure you put a fire ring back in your waste gate so you can actually make some boost.
Ya I thank Ryan for that one
Flipnog will make another appearance. I will pull my fire ring off so Jeff has no more excuses!
How deep into WA will I have to drive? Might bring the turbo D15 and put down more than you all with only 1.5L of displacement. haha.
I wanna see the d15 do work
+1
-
It was in there but got unseated to win a discussion and I lost on thedyno cause of it. No biggy always this year
-
Shit eh Lynnwood aint far!!
-
Almost stopped in and said hi to Tommy today :)
-
Almost?
-
Almost stopped in and said hi to Tommy today :)
i did stop in today... he said fuck man again already? its to early to schedule something in that far out.
so he said he would/usually vaca's in May, so lets shoot for just after that. JUNE sometime!... lets give it a couple months, then pin something down solid.
we have an approx time, now you guys have a spot on the calendar to have a fuckin car DONE AND RUNNING! lets DO WORK!
-
I just have to put in for vaca at least 2months a head of time
-
I just have to put in for vaca at least 2months a head of time
tommy said we will lock this down in april. so yup.
for now, just plan to have your car done in.... APRIL... so it will be done in May, then be ready. and to the ones that like to break shit, dont drive it once its done :P
-
i will be done march-april have to events to race in may and june
-
Are you actually gonna have it tuned or you gonna run it on a 5 year old base map still?
-
Weoird I ususally fuck with him in FGeb to get the date, but its usually 2nd or 3rd weekend in may...
LMK if I can help
-
Are you actually gonna have it tuned or you gonna run it on a 5 year old base map still?
Prob 5 year old base map that's what I do.
-
doesnt sound like the Hyundai is coming back this year, getting parted out.
told a buddy his shit HAD to be running by May at the latest, and that he is coming to the meet. lol. hope that motivates im...
you guys do the same! lets get some cars/people forsure coming.
-
I got a couple guys that wanna come. Why part in the Hyundai?
-
at random points when i have talked to him in the past i have counted between 6-9+ cars between him and his gf. you think my attention span is bad. he just as place to put them. he has plenty of projects. i might try to kick his ass in gear to get one of them on the dyno. but he got an AWD DSM to replace the hyundai im pretty sure. i think he as a RWD thats worth of our meet. but like most times selling shit off, im sure its to put money into one of the other ones, or lessen the payments on a car.
-
Hopefully he doesn't try and have a strap melted by the waste gate dump this year and try and fall off the dyno.
-
yeah, that was gay. i have had it happen to my car before. but mine must have been over strapped down, we didnt even notice it till we pulled the car off the rollers.
-
True story
-
I pretty sure I'm in, but if the dyno is 2WD, I won't be running anything.
-
It's 2wd
-
whoever votes other needs to say what day they would like.
doesnt it say its a 2wd dyno in the first post?
-
We gotta figure out when if this is gonna go down getting a new boss so the sooner I can put in time off the better
-
5 votes, and not many people posting.... plus Tommy doesnt want to set a date 5months out. think he said 2-3.
-
Damn that's right
-
whoever votes other needs to say what day they would like.
doesnt it say its a 2wd dyno in the first post?
I voted other just to fuck with you.
Yes, the original post said 2WD dyno, and if you read my response you would have noticed I said "But if it's a 2WD dyno, I won't be running anything."
Now that we have that cleared up, I look forward to getting drunk, acting like an asshole, and starting fights with all of you for nno apparent reason other than brand loyalty issues.
-
Ill be attending even with a 2wd dyno, my shit should be tuned and dyno'd by then
-
I will be there. With something RWD and 800+hp
-
Anything set yet?
-
5 votes, and not many people posting.... plus Tommy doesnt want to set a date 5months out. think he said 2-3.
::)
-
oh yeah I am impatian
-
we need more fuckers confirmed, and voting on a day. personally id just pick the first weekend in june. but lets give it another month or so, see what happens... then ill go harass Tommy and setup a date.
-
june 1st is import face off that why voted for the following week. I have at least two people coming with me.
-
I also voted for the 7th. I know I'll be there with my nova and a buddy with my old integra.
-
IM going for sure. With a new base map and no check engine lights this time. Lol new chassis same setup. Hopefully LEED can tune my shit after the meet. Everybody should help make this happen one way or another. Lol please hahaaha
So DAVE if you see this just know Im gonna want a tune! O0
-
Im down to go, have my brother in law that will wanna go to. Hopefully we'll wanna dyno his car.
Also ill dyno my stock zc I just rebuilt. Just for kicks. depending on price.
Maybe ill have a setup by then. oh well.
Hopefully whatever date doesn't land on another big meet day.
-
I would think after last year dave shouldn't be asked to tune anything while we are there. Everyone wanted him to tune and it was ment for some hang out time.
-
Im down to go, have my brother in law that will wanna go to. Hopefully we'll wanna dyno his car.
Also ill dyno my stock zc I just rebuilt. Just for kicks. depending on price.
Maybe ill have a setup by then. oh well.
Hopefully whatever date doesn't land on another big meet day.
we have a tendency not to give a shit about the other forums/meets... lmk if any other big ones conflict. ill take that day down.
along with drag days? someone wanna double check the tracks also...
I would think after last year dave shouldn't be asked to tune anything while we are there. Everyone wanted him to tune and it was ment for some hang out time.
he has always said he is there for "tuning advice". not sure where he draws the line? i know he likes this shit, but im sure he wants to hang out and drink beer also.
-
June first is the only track day
-
I only try to go if the track is open also. Not worth walking around with all the same guys. Gotta have something to watch and drool over.
Ill have to check sites and see. People have been slacking on that stuff. Atleast last year they were. I knew about " meets " track days like 2 mayyybe 3 weeks before.
-
May 26 wood burn
June 1 Kent
April 13 Kent
First two are import face off
Last is honda - tech meet
-
Now to check which friday before is a payday :D i vote 14th. Sending vote now
-
Your vote doesn't count no. Porn
-
I would think after last year dave shouldn't be asked to tune anything while we are there. Everyone wanted him to tune and it was ment for some hang out time.
Well I'd rather have Dave tune my shit then speed factory. Rich is to far. I was hoping to see if he could tune it in the morning before the meet started or after all the dyno runs are done. But I guess fuck it. If he can't do it or doesn't want to do it I won't mention it anymore. Its not like I'm his friend or anything.
-
I would think after last year dave shouldn't be asked to tune anything while we are there. Everyone wanted him to tune and it was ment for some hang out time.
Well I'd rather have Dave tune my shit then speed factory. Rich is to far. I was hoping to see if he could tune it in the morning before the meet started or after all the dyno runs are done. But I guess fuck it. If he can't do it or doesn't want to do it I won't mention it anymore. Its not like I'm his friend or anything.
hey, get your car 99% ready. CEL free, etc. ill see what i can do about putting a quick little base map on it.
-
my ( if I find one ) will be on kill mode or die trying.
-
I'm in ;) boosted crv so no dyno for me
-
I'm in ;) boosted crv so no dyno for me
Bill! :noel:
-
Hope to get the CRX there this year ::)
-
Hope to get the CRX there this year ::)
Right ::)
-
Hope to get the CRX there this year ::)
I gave you an ecu to get it there this year. Don't forget the beer goggles.
-
https://www.youtube.com/watch?v=N8A0Eu7xCBk&feature=em-upload_owner (https://www.youtube.com/watch?v=N8A0Eu7xCBk&feature=em-upload_owner)
-
Well now we know it runs
-
It's slowly making progress O0
-
DO WORK! :noel:
-
It's slowly making progress O0
where is the turbo? :?:
-
First things first bitch! I need to drive this fucking thing first. :noel:
-
Bill, you can dyno the CRV, i've dont it many times. you just drop the viscous coupler off of it and your set. FWD only. the output out of the transmission is direct drive so you dont have a diff in the transmission to worry about..
-
:mexi: fantastic! i just have to get some tuning in, i got it running on my base map but its sputtering.
-
Ya buddy
-
Maybe I will take my new gas sipper there and go for lowest hp. I can imagine a b7 with a b1 cam is like 80hp crank so like 50-60 wheel maybe. But it would be worth the cruise stop in Co on the way back for some treats
-
We are trying to get the rape truck done in time. hoping for 750rwhp on a mild tune with a big single and a 4l80e
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi62.tinypic.com%2F29dg741.jpg&hash=496cf52434c56380fd3e97f8adfb75d8b85be697)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi57.tinypic.com%2F29oqukg.jpg&hash=f91dda9a64c06ee73b01da267cb4967cab9110c0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi60.tinypic.com%2F2a69i0l.jpg&hash=a5e4ee8ebf891d363a926fd0f616d5cf2f22ab1b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi57.tinypic.com%2F1553qiv.jpg&hash=b74a5792a7dd4ea52d4d649c2f828c7d440d0b46)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi57.tinypic.com%2Fn6w229.jpg&hash=bdba4b76866e12d885c4ea05c36a04ad172cea74)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi60.tinypic.com%2Fnprtk5.jpg&hash=5c1b1ecffc8b28710fcf1b1f4783d30ff71fb331)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi58.tinypic.com%2F2vbu1ef.jpg&hash=e0679ccc9a2c610461448186e543a81cdf642447)
-
We are trying to get the rape truck done in time. hoping for 750rwhp on a mild tune with a big single and a 4l80e
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi62.tinypic.com%2F29dg741.jpg&hash=496cf52434c56380fd3e97f8adfb75d8b85be697)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi57.tinypic.com%2F29oqukg.jpg&hash=f91dda9a64c06ee73b01da267cb4967cab9110c0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi60.tinypic.com%2F2a69i0l.jpg&hash=a5e4ee8ebf891d363a926fd0f616d5cf2f22ab1b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi57.tinypic.com%2F1553qiv.jpg&hash=b74a5792a7dd4ea52d4d649c2f828c7d440d0b46)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi57.tinypic.com%2Fn6w229.jpg&hash=bdba4b76866e12d885c4ea05c36a04ad172cea74)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi60.tinypic.com%2Fnprtk5.jpg&hash=5c1b1ecffc8b28710fcf1b1f4783d30ff71fb331)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi58.tinypic.com%2F2vbu1ef.jpg&hash=e0679ccc9a2c610461448186e543a81cdf642447)
fuck yes!
-
Who's truck ross?
-
My friend Brandons, hes not a forum guy. We are in the process of building a 427 lsx for it and it will be 4wd after we get the rear suspension dialed in, going for 1100-1200hp on the 4wd build, we will be doing a front half frame swap with a 9.25 out of the HD trucks. This is a bone stock 4.8 bottom end we rebuilt, shot peened the rods, upgraded bolts all new bearings. Big ass cathedral port heads (flowed 325cfm after i ported them) 2.20 intake valves 1.88 exhaust. mild cam (ls6 out of runsfromdacops ctsv) ls7 lifters. I should do a build thread on it i guess. I did take a lot of pictures.
Here is some pictures of the heads I ported that are on it.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi62.tinypic.com%2F2qlycn6.jpg&hash=afac6392963d744029051d8641a487b5249957ad)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi58.tinypic.com%2F2607q4h.jpg&hash=6f222d09c8cfadad924ec8763db616ddc064cb54)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi58.tinypic.com%2F25fq2qe.jpg&hash=a77f359b243cec94cf6ff594c30c815f9588e9ed)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi58.tinypic.com%2Fa0hp93.jpg&hash=dd5e2a810b2f87391b11f0fe1bd18c04f0859cee)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi61.tinypic.com%2F51eru8.jpg&hash=85ad613b3de2e5da690bc9ed43c42d542b50d81d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi60.tinypic.com%2Fb8214h.jpg&hash=d5675471d074cdc49c9be19a3f56141e7919ee79)
-
Beautiful, love to see the build tread on this :noel: :noel:
-
Here are a picture of the factory powder forged rods
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi60.tinypic.com%2Fivwgh3.jpg&hash=d4868b6cb4894d62d3b99e622ea5509ac173aa5d)
-
nice. this needs dyno time.
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi61.tinypic.com%2F34o8x34.jpg&hash=4a8cd1ebaaf2952dd7d4bbdef38f51292dd1aaf9)
transmission built and installed
-
So we setting this up end of this month or next still gotta put in for time off
-
fuck.... sending emails. probably change in venue... will keep you all posted. text me if you can help further...
-
Change in venue?
-
Tommy is the only one working at his shop and he has work piled up. Said he doesn't know if he can host the dyno day at his shop.
-
what that guy said. I'm at work right now. but have been trying to email a couple shops so see if they will host our event...
maybe score an awd dyno in the process..
-
Long as we do something don't even care if its a bbq
-
Long as we do something don't even care if its a bbq
Or the good old days of crashing honda tech meets.
-
so first email back is DRIFT OFFICE.
they say:
1) 8 cars Minimum
2) 12 cars Maximum
3) $60 plus tax for 3 pulls. complete with AFR and Boost if necessary
4) Dyno sheets will be emailed
5) 10:30AM Start, 5:30PM End
6) fuck your german cars....ok actually said something about the being a bitch to dyno/tie down.
DRIFT OFFICE has an AWD dyno...think its a DynoJet.
if we get a spot at a place with AWD dyno i have like 4 other cars + my Galant willing/wanting to run...
-
do what we gotta do $60 is kinda bullshit for us but new venue don't know how we roll
-
I tried having drift office do this a couple years ago and it was a massive hassle so we went with tommy. either way i will be bringing 5 cars with me. 2 of my own and 3 buddies. 12 cars max? how lazy is that? Thats the problem with Drift office.... Bob has money and does not need to make money so hes not worried about our needs in making him some money while helping us as a group out. Its his shop and that is fair, as bob is a good person and fun to be around.
-
yeah. he said maybe 15 cars. but my guess is he is allowing for 30mins a car.
still no wore back on others I emailed. think there are 2 shops up in Marysville I haven't contacted. one should have awd the other I think is 2wd.
-
anything south less drive for me lol
-
CarbConn:
We charge $85 per car for club events. $115 AWD. Usually 4 pulls or so.
:o
-
Fuckin a price just going up
-
got another email back...shop closed.. :-\
waiting on Marysville Speed Custom. its a 2wd dynojet. from what someone passed on to me, looking at like 40-50 for a couple pulls, so pretty much the same as Tommy. just waiting for some info from the shop and availability...
if this pans out, probably the best bet. but its obviously a little bit more north. buddy said to contact PINA, but thought they where closed? they have a AWD dyno.
thinking if anyone wants to run an AWD car im just gonna set up another day. more on that as this all unfolds?
-
got another email back...shop closed.. :-\
waiting on Marysville Speed Custom. its a 2wd dynojet. from what someone passed on to me, looking at like 40-50 for a couple pulls, so pretty much the same as Tommy. just waiting for some info from the shop and availability...
if this pans out, probably the best bet. but its obviously a little bit more north. buddy said to contact PINA, but thought they where closed? they have a AWD dyno.
thinking if anyone wants to run an AWD car im just gonna set up another day. more on that as this all unfolds?
What about SpeedFactory? :noel:
-
buddy said to contact PINA, but thought they where closed? they have a AWD dyno.
The guy that owns/owned pina is a fucking faggot. I hope a car came/comes unstrapped on his dyno and runs him right the fuck over.
-
What about SpeedFactory? :noel:
There dyno is gay....lol but its worth a shot. Think it will only do up to 600hp though. They use to go to drift office to tune there own shop cars because there dyno couldn't hold the power there cars made.
-
buddy said to contact PINA, but thought they where closed? they have a AWD dyno.
The guy that owns/owned pina is a fucking faggot. I hope a car came/comes unstrapped on his dyno and runs him right the fuck over.
yeah. they seem to think the same on GVR4.org also.
SF doesnt sound that appealing. we should have a couple cars with high power?.... what's the word on Jace and Alex?
we could always wait tommy out and I can keep swinging by to see what's up. schedule it later in the year...
-
buddy said to contact PINA, but thought they where closed? they have a AWD dyno.
The guy that owns/owned pina is a fucking faggot. I hope a car came/comes unstrapped on his dyno and runs him right the fuck over.
yeah. they seem to think the same on GVR4.org also.
SF doesnt sound that appealing. we should have a couple cars with high power?.... what's the word on Jace and Alex?
we could always wait tommy out and I can keep swinging by to see what's up. schedule it later in the year...
Haven't talked to ross. I talked to Jace today and he said he just finished setting up the car to cert. for the 8.50s. So I'm sure he will probably be ready. Would like to see some big numbers from him and ross.
-
Ross is a beast!
-
I can't make big numbers
-
richtuned? blood? Intec?
-
sf got new dyno as they moved location.
-
sf got new dyno as they moved location.
No shit? What are they rocking now?
-
Just got off the phone with Austin at Rich Tuned and he said we could set something up at his shop and he would be down with our antics. Rich was at one of our dyno days a few years back. Has a dyno Dynamics setup and its $50 for 3 pulls with no wideband.
-
Just talked to intec
They want $800 for the day. They open up @ 1030 and go to 7. There is a 1 hr break for lunch. So if they could do 3 cars and hour(which is hustling) 7.5 hrs @ 3 cars an hour = call it 20 cars...... it would be about $40 a car.
-
AJ with the win!
updates coming.
-
SET YOUR CALENDER!!!
June 7th 2014
NEW LOCATION THIS YEAR
Rich Tuned
3420 C st NE #405
Auburn, Washington 98002
10:00 am - 6:00 pm
2wd Dyno Dynamics
$50 for 3 pulls
Bring your shitboxes tuned. Highest power this dyno has seen is 888whp. Lets see if one of you nogs can beat that!! :noel:
-
Fuck ya no 2hr drive for me
-
your welcome :P
-
fuck ya ill be there
-
PLEASE POST AND/OR LET ME OR AJ KNOW IF YOU WOULD LIKE SOME TIME ON THE ROLLERS GUYS!!
would like to get an decent headcount of who is serious about being on the dyno.
-
You know I will be on the rollers
-
Me + 1 for sure.
-
whats up with bros da?
-
whats up with bros da?
He's just daily driving the cleanest stock da ever.
-
Should have let me talk to Tommy... I didnt know there was an issue till yesterday when AJ txted me.
Rich is cool, but im not into it there. Nor do I care for like at least 80 percent of his clientelle
LOL have fun.
-
Should have let me talk to Tommy... I didnt know there was an issue till yesterday when AJ txted me.
Rich is cool, but im not into it there. Nor do I care for like at least 80 percent of his clientelle
LOL have fun.
Comon nigro........ bring that big ass hillbilly twin charged setup down and roll some smoke in that fucking place! Then do some dirty rippers as you leave!
-
Should have let me talk to Tommy... I didnt know there was an issue till yesterday when AJ txted me.
Rich is cool, but im not into it there. Nor do I care for like at least 80 percent of his clientelle
LOL have fun.
he is simply overbooked.
its our dyno day there. don't worry about his clientele.
-
I want to go just to see the rippers leave. And some numbers.
-
His clientele is quite ghetto.. i bought a chipped ecu a while back and i was thankful i had my pistol.
Rich is a good dude, i wouldnt let that stop people from having a dyno day there...
The only downside IMO is the dyno he has it reads nothing like what most people have been on.
-
just like we told one of the newbies last year, we all have guns. your shit will be legit at the meet...
cant really believe people are siting his clientele as a problem... i have bought/sold shit from arlington to puyallup and all stops between, and have been thankful i had my gun just in case.... we live in a fucked up world.
every shop is gonna have them... and I HAVE SEEN SHADY PEOPLE AT OUR MEETS AT TOMMY's SHOP ALSO... so dont think its 'safe' there.... ::)
the dyno has been called a 'heart breaker'... but i think that dyno dynamics read like 15% low? im sure Josh has numbers to compare/confirm the %?
-
Havn't missed a year yet....I'm pretty shaddy.
-
its not really a problem, just agreeing about the ghettoness.. I'll be there, but dont really have anything to dyno
-
Should have let me talk to Tommy... I didnt know there was an issue till yesterday when AJ txted me.
Rich is cool, but im not into it there. Nor do I care for like at least 80 percent of his clientelle
LOL have fun.
he is simply overbooked.
its our dyno day there. don't worry about his clientele.
Im thinking I have a much better idea whats going on at both locations than you do by your tone.
Jew :O)
:Jew: :Jew: :Jew: :Jew: :Jew: :Jew: :Jew: :Jew:
-
Can streetbikes dyno @ rich's place? I have an old ass cb1000 I'm curious about.
-
its no secret i wonder this world lost and with no care about politics or bs..... im here for the cars, thats all.
i just wanna have a meet/dyno day...
AJ got us a location hosted by a cool guy.
so everyone fuckin show up.
thats all.
thanks.
:Jew:
-
Okay...... who's bringing food?
I'm gonna bring my hibachi bbq and hotdogs, buns and mustard and ketchup. I'll probably bring some paper plates too.....
-
I will bring my dutch oven and make some carnitas! :mexi: Probably make about 10lbs so I can share.
-
I will go out and off a cow so we got burgers
-
I will bring my dutch oven and make some carnitas! :mexi: Probably make about 10lbs so I can share.
I will go out and off a cow so we got burgers
Mmmmnnnn. I'm hungry....
-
Nothing new from the NW Fluffy crew :-*
I will bring my dutch oven and make some carnitas! :mexi: Probably make about 10lbs so I can share.
I will go out and off a cow so we got burgers
Mmmmnnnn. I'm hungry....
-
cant wait for this day to come already. :mexi:
-
True story
-
Would be cool to break the dyno their.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi58.tinypic.com%2F19tduw.jpg&hash=d6bd06e23e9dd25fa634261c9dee160fef511b1f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi57.tinypic.com%2Fbge33o.jpg&hash=0c411531af29ee7d741f110109bbf000ecf25a47)
-
doesnt look like im gonna need to look for porn tonight... :noel:
-
Would be cool to break the dyno their.
DO IT!
-
Might as well break it every one of the cars at the track yesterday ran terrible
-
Should i make the trip up guyz?
-
Should i make the trip up guyz?
yes. you are more than welcome to show up.
-
Should i make the trip up guyz?
I would love to see your integra in person.
-
Might show my vagina if i get my welfare check before then.
-
get your piles of shit ready!!!! you got 1 month fuckers... O0
-
Work in on it
-
forgot to let you guys know I won't be able to make it this year.
maybe next year
-
One month mother fuckers. Get your shit together.....
-
Just need head gasket and a few odds and ends will be ready
-
Ordered up some locking header bolts. A new power valve and some carb gaskets. Gonna try and slap the headers on this weekend. Hope it makes more power than last year....lol powerless wonder.
-
you can find a used nos kit for cheap probably
-
3.5 day bus ride from CT...coast to coast???? 3200 miles :mexi:
-
There ya go
-
Damnit, plans altered, I have to be home for the epoxy floor guys....guess I'll wonder around New York a day or two then.
-
Shit bone if you went I would have to go just to argue with you about stuff. lol
-
Worst thread ever.
-
Shit bone if you went I would have to go just to argue with you about stuff. lol
PNW is on my list to get lost at for a week or three. Figure be a no bald nog hippy and get around as needed, mail my tools out or home as needed.
-
Anyone have a comp elbow for holset?
-
Soon
-
less than a week bitchez.... O0
-
Who is actually gonna show?
-
I'll be there......
-
For the nay saysers that said I wouldn't be there :noel:
https://www.youtube.com/watch?v=HVwvA5GDIwU (https://www.youtube.com/watch?v=HVwvA5GDIwU)
-
Best car I ever met? Awesome when the kids watch and like what they see
-
The only tuning I will be doing is slamming the dizzy to the firewall O0. Bring yer' shit boxes yo!
-
The man has spoken!
-
I'm pretty stoked for Saturday. Beautiful weather, brewskies, friends, and sweet rides!
-
I agree. Now if dave shows up before noon I'll be surprised. Anyhow, should be great times.
-
I'm pretty stoked for Saturday. Beautiful weather, brewskies, friends, and sweet rides!
truth.
-
I will be there with rape truck. hoping for 700+
-
I will be there with rape truck. hoping for 700+
Oh fuck yes........... I just got a chubby........ I want to see this fucker on full tilt! Nignog!
-
Ross, bring your tuning shit too. I might know someone that might want a tune. My bro always says he will bump power later but where we're all at the dyno peer pressure is a bitch....lol
-
Ross, bring your tuning shit too. I might know someone that might want a tune. My bro always says he will bump power later but where we're all at the dyno peer pressure is a bitch....lol
I'm sure there is to race gas near by also? ;DDD
-
I'll pack my vice grips and check valves O0
-
I got the hello kitty lappy reay
-
3 days nigros. I got to pull my carb tomorrow and figure out what's up with it and see why it won't idle below 1200rpms.
-
Couple days left get that shit together
-
Couple days left get that shit together
or... couple days left, so keep your shit together lol.
-
Mine is fine kinda lol
-
Mine is fine kinda lol
Sounds about right. That wrench still holding?
-
Yup
-
Sweet. Any body know if there is a welder there or should I bring mine? :noel:
-
ill have a bag of tools, laptop, couple tuning things. RHMT stickers. sunburn/vampire lotion.
someone bringing a BBQ?? or can i turn some jumbo jacks for a good profit? :Jew: :-*
-
Don't me trying to squeeze in on my jack racket. I will have the dutch oven therw ftbough making 10lbs of carnitas :mexi:
-
If someone is confirmed to bring a BBQ, I'll bring dogs/buns, maybe even a burg or two.
Anyone?
-
Bring Tortillas! Nothing worse then a bunch of grown men choking down on hotdogs. We wouldn't want to get Spiker to excited.
-
If someone is confirmed to bring a BBQ, I'll bring dogs/buns, maybe even a burg or two.
Anyone?
I'll bring my bbq, shit I'll even bring the vice grips to turn the hot dogs with.
-
Tomorrow bitches I will bring beer and water any requests
-
Frontpage Updated!
-
Frontpage Updated!
Awesome pict of Dave doing work on my car '12 Meet :noel:
-
Winning. Russ, why aren't you coming this year? Your failing with no vice grip distributor action.
-
Winning. Russ, why aren't you coming this year? Your failing with no vice grip distributor action.
I think I can pick up the slack :) But serious, why aren't you coming Russ?
-
anyone have a stock 99-00 B16 throttle body and an OEM bseries fuel rail?
-
Going out in a few to finish up the high boost tune. wideband sensor took a shit on Wednesday when we where tuning. Hopefully it stays together! I'm just a rookie tuner.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi57.tinypic.com%2Fe88zv5.jpg&hash=06e51a06372862d597561b0282116308f750e359)
FYI - I will not be bringing any honda tuning stuff with me. I will be bringing EFIlive and hptuners. I'm not coming down to tune, just want to kick it with all you nigs.
-
Shit, I was gonna bring you a tranny to rebuild ;DDD
-
Shit, I was gonna bring you a tranny to rebuild ;DDD
I got one of them to
-
Going out in a few to finish up the high boost tune. wideband sensor took a shit on Wednesday when we where tuning. Hopefully it stays together! I'm just a rookie tuner.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi57.tinypic.com%2Fe88zv5.jpg&hash=06e51a06372862d597561b0282116308f750e359)
25 psi of FUCK YEAH! Can't wait to see this beast.
I'm all ready for the road trip. All packed up with tools, bbq, chairs and a cooler.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140606_205623_zpse6cd6bf7.jpg&hash=5c49344d0c7cef932c70bb135dbd712863b59792)
You bitches better not forget your camping chairs.
-
Fuck gotta dig out chairs
-
fuck yeah, BRING CHAIRS!!!
i got some tools, timing light, laptop, misc shit... oh and RHMT stickers... not many left...
excited ;DDD
-
Jesyus fuck, I talked to rich... aFTER SEEING LIKE 4 POSTS ON fb ABOUT THIS THING... hE DIDNT TELL ANYONE BUT PEOPLE WERE ADVERTISING IT AND SHIT.
Expect a shit show. Ill be there in the truck. and wanted to dyno it for baselines before i put the twins on it but evidently it wont fit ont he dyno:( Lame
-
Sweet. We get to make fun of pink dildo shifters. And herral frushc cars.
-
A fucking crx doing a wheelie
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_091330_zps715ef2e9.jpg&hash=091ffe1542200f93b5ebd3be60223f5b59e15ddb)
-
We're here
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_101357_zps97f12e4f.jpg&hash=92dc905ce518961aafd734a1dfc6427e6e57ab0c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_101434_zpse1e10816.jpg&hash=4062534dfcfd819b41a02f52647720724eeb9f59)
-
Ryan just pulled 128hp/122tq. Bone stock ls with open exhaust.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_105233_zps808e0802.jpg&hash=29b062a8825618f2f6102c5a8ea1d7e945bdd930)
-
I dyno day even has midgets........ WINNING!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_113015_zps05470bdf.jpg&hash=db7549b616fd373baf5bfaa0475c40d2ef758d79)
-
My nova made 196hp 280tq.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_114843_zps4a8cd677.jpg&hash=ec362ea77e118c23eb5f30fd7138eb395777ba1b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_114355_zpsce3cd9a4.jpg&hash=5a9571ba3a58e52b56d3d1f989b9ec60fc454f42)
-
72 nova did 312hp 330tq
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_115654_zpsab487312.jpg&hash=4086bb52234de683ffde8474eb9450bc223864f8)
-
Fresh Carnitas in the parking lot.....lol
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_120824_zps4d1274d0.jpg&hash=0447530da2e00440fe478536c029ee9dd1342bf0)
-
Rape truck about to go on the dyno
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_121344_zps48baf53e.jpg&hash=7d9c68e83554ad0d1e958052a402fe98390444cd)
-
On 13 lbs.....
Rape truck
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_123745_zps32cc03b7.jpg&hash=3de2d0fab2e9308e0f82dace48370255eea42f06)
-
Brodozer is about to make a pass
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_125647_zps064fddb7.jpg&hash=1df38a23308aab20b3d471637cdbcc886212dfef)
-
Brodozer made 360hp 822tq
-
Bills about to make a pass. Pulled the driveline to the rear.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_135627_zpse9b1aca2.jpg&hash=a1fe68072e5a3e0dc9794819a80ba44133b106fc)
-
Bills crv made 224hp 220tq
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_141214_zpsb3c0231e.jpg&hash=c7eb78f952d9e770eaaf58d5d29d39234fe3af43)
-
Brodozer is about to make a pass
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_125647_zps064fddb7.jpg&hash=1df38a23308aab20b3d471637cdbcc886212dfef)
Is Spiker really that short? lol
-
Jeff jdmhatchracer94 just made 267hp 211tq
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_150553_zpsb0efb18d.jpg&hash=6211608daa3b57805d435009d0a97d28447831c6)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_150606_zps097f2701.jpg&hash=753d127748327d659359e10fcfad53aae9804dbc)
-
Brodozer is about to make a pass
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_125647_zps064fddb7.jpg&hash=1df38a23308aab20b3d471637cdbcc886212dfef)
Is Spiker really that short? lol
Nope, he's assuming the position of being railed by John Michael.
-
Dustin made 290hp 258tq
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_154343_zps585e5b85.jpg&hash=d3bed23fcab9c7135459a69427a9aed1828e1ecc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_154401_zpsafd2c837.jpg&hash=7e471362fae7a2947e41573f4912b5e47184ca05)
And mitch showed up in the 240
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi1223.photobucket.com%2Falbums%2Fdd518%2Fratcityrex%2F20140607_154439_zps7043e41d.jpg&hash=a3f127b4f4c05c7c4cd2db7bfcd15af8a2cee6b6)
-
Good shit guys. Keep em coming.
-
Someone go flip spikers tow mirrors up for me when he's not looking O0
-
was a great day. i would like to thank everyone for showing up!!! and Rich at RichTuned Motorsports for letting us have our event at his shop!
im glad Bill dropped the driveshaft on the CRV. was cool to see it run. must be a fun DD.
was hoping to see bigger numbers from the 72 Nova...needs more LSx...
same goes for Jeff's car... next year needs new build, chassis, everything...and/or Nova.
:mexi:
-
Save a sticker for me, I forgot to get one from yah for the CRX
-
Was a bad ass spot. Like Rich's shop alot. Way better parking than tommy and he ended up hooking us up with the prices.
Pretty mellow meet this year. Kinda like it a little more because you get to hang with everyone and talk shit.
Day was summed up with......
Ryans shitbox crx with a stock ls made great power and it took the Russ award this year
My nova proved that points suck and then when you swap them out for a pertronix ignightor there good for an extra 20hp and 60tq
That 72 nova sounded fucking healthy as fuck. B <But like said needs boost an lsx or a little of both
Rape truck needs more cam.
Brodozer makes mad tq and is flat bill approved
Bills crv was a cool fucking build and for what it's got I'm sure it surprises the fuck out of people when he hammers on it
Jeff ' s da needs a match and some gas, and a tune.
Dustin ' s car sounded real clean with the twin tuners in it...lol
All in all a epic day.
And I almost forgot about the mexi food ryan cooked up........... WINNING!
-
Bitch is smouldering in the field as we speak
-
Bitch is smouldering in the field as we speak
Take pics of it.
-
i knew i should have brang stuff for smores...
-
The fire or your car? I thought I put those coals out.
-
You guys should post up the pics you got today. I know all you fuckers took some.
-
(https://scontent-b-sea.xx.fbcdn.net/hphotos-xap1/t1.0-9/10268501_10152047338535378_4314558237816397982_n.jpg)
WUB :)
Stock tune vs Programmer (Edge Juice with Attitude) for baselines before I put the twins on it and tune it. It picked up 120ish WHP and over 300 TQ :) Pretty happy with it for a 250 dollar mod :O). We nigger rigged a lockup wire for the converter to lock it in 3rd so it wouldnt down shift... The 22 inch wheels and 37s werent helping the numbers at all LOL... But Riches dyno isnt exactly known for being generous :)
https://www.youtube.com/watch?v=5wP0v6hqIZ0&feature=youtu.be (https://www.youtube.com/watch?v=5wP0v6hqIZ0&feature=youtu.be)
(https://scontent-a-sea.xx.fbcdn.net/hphotos-xpf1/t31.0-8/10333813_10152047543035378_9085935404596940455_o.jpg)
I had a good time, glad I came out :)
Next time rHMT Compound twin setup will be in effect and all this shit will be stuck on it:
(https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/10152625_10152023243445378_7763712133597246338_n.jpg)
I bought this to make sure I had a way to get shit pigfiucked together (Im in the entire setup under 200 bucks with wire mask and tank :):
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xaf1/t1.0-9/10341833_10152030392085378_5758348418490141081_n.jpg)
(https://scontent-a-sea.xx.fbcdn.net/hphotos-xpa1/t1.0-9/10271493_10152028843945378_8060780814638507175_n.jpg)
-
Wow brian. That's a smoking deal on the welder. Now you just have to Lear how to use it ;-)
-
Where did Dustin get that teg? Clean..
-
Where did Dustin get that teg? Clean..
thanks.
it came from BFE where they make the meth... was stored indoors so the methheads didnt strip it...
it still needs some work. i have a fresh OEM bumper, ITR lip. wanna pick up a couple more things. then get shit color matched/resprayed. now that the power has been made, ill probably start working on that and/or getting the galant running right.
-
That picture of spiker is funny. They sat there for a good minute like that. Haha
I remember seeing on fb you selling a wirefeed and tank setup I wanted :(
-
Ya I sold the 110 setup i picked up... Stoile this one brand new...
-
Brian your truck kicks ass :noel:
-
Looks like a good turn out, any vids?
-
I've got a couple that I'll try and upload later
-
turbohf @ RealHomeMadeTurbo.com dyno day 2014 (http://www.youtube.com/watch?v=i6g4crLeDHU#ws)
:Jew:
-
turbo 5.3L LSx truck @ RHMT dyno day 2014 (http://www.youtube.com/watch?v=9qv2BeLX1ys#ws)
Rape Truck O0
-
Working on uploading to youtube.
-
Thought the rape truck was a 4.8?
-
Thought the rape truck was a 4.8?
thought I heard 5.3 with 4.8 rods or someshit.... Josh get me full info I'll update correctly lol.
-
Rape truck spinning tires on the rollers,
http://youtu.be/xXfODARA1Jc (http://youtu.be/xXfODARA1Jc)
-
Thought I had more videos, guess not....
http://youtu.be/IwMVdVQblKU (http://youtu.be/IwMVdVQblKU)
-
Rape truck is a 4.great get your shit right ;)
-
Where did Dustin get that teg? Clean..
thanks.
it came from BFE where they make the meth... was stored indoors so the methheads didnt strip it...
it still needs some work. i have a fresh OEM bumper, ITR lip. wanna pick up a couple more things. then get shit color matched/resprayed. now that the power has been made, ill probably start working on that and/or getting the galant running right.
Is that the one you were trying to trade the EK for or whatever deal you had going..lol
-
Where did Dustin get that teg? Clean..
thanks.
it came from BFE where they make the meth... was stored indoors so the methheads didnt strip it...
it still needs some work. i have a fresh OEM bumper, ITR lip. wanna pick up a couple more things. then get shit color matched/resprayed. now that the power has been made, ill probably start working on that and/or getting the galant running right.
Is that the one you were trying to trade the EK for or whatever deal you had going..lol
yup. traded the ek for it... post is in my signature.
-
I didn't get shit for pics and videos. Was to busy hanging out, drinking beer and eating :) I did get these though.
CRX on the dyno pulling the ghetto card. Wish I got a pic of Rich trying to drive it on the dyno. He wasn't to thrilled about the lack of brakes.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F13511-2%2F20140607_111026.jpg&hash=25793f957c7027925e7ba2ae95c6f951ca55e4ec)
Rape truck being all rape-y
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F13515-2%2F20140607_121346.jpg&hash=dbc4737991821c97154e1727fc9281b88c374956)
Beer and turbos
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ftheforgottenserver.com%2Fgallery2%2Fd%2F13515-2%2F20140607_121346.jpg&hash=dbc4737991821c97154e1727fc9281b88c374956)
CRX getting a shitty ripper in and setting the low bar for the day.
http://youtu.be/Z2YVfqixbyo (http://youtu.be/Z2YVfqixbyo)
-
Good turn out for you guys... The Beast Coast meet should be the same.
-
Rape truck is a stock 4.8 short block with studs