:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: crxvtec91 on November 26, 2014, 01:19:19 PM
-
Pick fuckers, going to try and change the front page weekly!
-
just got another idea. we vote on those above... post suggestions for next weeks voting...
-
just got another idea. we vote on those above... post suggestions for next weeks voting...
W3rd :noel:
-
Bro dozer this week, gringo next week.
-
You selected too many options. For this poll, you may only select 2 options.
FUCK YOU! I want all of them. Make a goddamned collage of excellence.
-
collage
-
You selected too many options. For this poll, you may only select 2 options.
FUCK YOU! I want all of them. Make a goddamned collage of excellence.
You make it ill post it!
-
Bro dozer this week, gringo next week.
Awwwwww Thanks!
-
Bro dozers getting data-logged tonight and the tune tweaked. Still on the basemap from Anarchy. Hes been bugging me about getting him files LOL :)
Tune hasnt been touched yet but EVERYTHING is solid. Setups got 3000 miles on it so far. Super happy it s a shit ton of fun to drive :)
Sticks at tax time then final numbers with big dick boost and fuel :)
New final numbers after that.... :) See what it runs.
Right now there's ALOT of focus on the car for the first time in a couple years O0
I haven't gave a fuck about it for a while. Thats changing this year.
Bigger injectors acquired (Old FIC 1150s to LEED)
ChroMo hoop bent
All ChrMo material plates and swing-out setups acquired..
Shopping for turbos (The T04ZR is for sale)
275s will be under the fenders (hubcaps of course)
New prototype Sequential shifter setup with K cables and K to H cable /trans bracket...
-
Bro dozers getting data-logged tonight and the tune tweaked. Still on the basemap from Anarchy. Hes been bugging me about getting him files LOL :)
Tune hasnt been touched yet but EVERYTHING is solid. Setups got 3000 miles on it so far. Super happy it s a shit ton of fun to drive :)
Sticks at tax time then final numbers with big dick boost and fuel :)
New final numbers after that.... :) See what it runs.
Right now there's ALOT of focus on the car for the first time in a couple years O0
I haven't gave a fuck about it for a while. Thats changing this year.
Bigger injectors acquired (Old FIC 1150s to LEED)
ChroMo hoop bent
All ChrMo material plates and swing-out setups acquired..
Shopping for turbos (The T04ZR is for sale)
275s will be under the fenders (hubcaps of course)
New prototype Sequential shifter setup with K cables and K to H cable /trans bracket...
Sir. Hamburglar get the pic's back up!
I wanted to test change the front pic so up is gringotegra for now.
-
Fuck the tank, its not worthy yet! Wait till I'm done guys O0
-
(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/984250_10152343879185378_5702578085959098702_n.jpg?oh=359e9cf2f5465a9d8e8445e2d21ed965&oe=55163DC5&__gda__=1423219631_d5541f5dc10cb0f0c41692a00de7babd)
(https://scontent-b-sea.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10599205_10152177071360378_5679179235653738219_n.jpg?oh=40671355030254f1295da0a7d598c996&oe=54D5A7C6)
-
Damn does that look badass!
-
Damn does that look badass!
Yes
-
Needs more mspaint.
-
You know... those options just aren't good enough. They aren't rhmt enough.
we need shit that has pie cuts, bird shit flux welds, junkyard salvage, zip ties, jb weld, and orange chicken to be on front page
-
Yuo dumb queer.. EVERYTHING you mentioned is n that truck, except the shitty orange chicken from Panda. Fuck panda.. Get some Ezells in your life.
-
New prototype Sequential shifter setup with K cables and K to H cable /trans bracket...
Who the fuck are you getting a sequential shifter from? I wonder if its anything like the one I have been designing! That would really piss me off if someone else come out with the same thing I've been working on before I get to finish mine. P.S. Mine is designed for the 94 accord I have, no k shifter cable bullshit... AKA you should buy one from me. The design for a functional pro-type is 90% done, I just gotta jet my shop finished so I can get the CNC running again.
You know... those options just aren't good enough. They aren't rhmt enough.
we need shit that has pie cuts, bird shit flux welds, junkyard salvage, zip ties, jb weld, and orange chicken to be on front page
My car has all this but no orange chicken. Just sayin
-
You know... those options just aren't good enough. They aren't rhmt enough.
we need shit that has pie cuts, bird shit flux welds, junkyard salvage, zip ties, jb weld, and orange chicken to be on front page
I'm sure we're all well beyond bird shit flux welds and shitty worn out junkyard parts...Still rocking the JB weld though. But times have changed. We've all grown up and made more money, China manufacturing has gotten better since then and shit is much cheaper now days. Even the shittiest Lincoln welder will make very nice looking flux core welds. Just because something is homemade doesnt mean it has to look like shit and fall apart on the way to work.
Done with lowest end Lincoln 140 welder using china brand .035 flux core wire.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi265.photobucket.com%2Falbums%2Fii225%2FXirus83%2FM4A2%2520Build%2FDSCF0411_zpsa0049263.jpg&hash=fab88ac8b8a12e41a1ab7a99c155eedce2d1195e) (http://s265.photobucket.com/user/Xirus83/media/M4A2%20Build/DSCF0411_zpsa0049263.jpg.html)
-
well said.
-
well said.
Agreed. Most of us are in our 30 ' s now except for a few. More money, more power.....
-
New prototype Sequential shifter setup with K cables and K to H cable /trans bracket...
Who the fuck are you getting a sequential shifter from? I wonder if its anything like the one I have been designing! That would really piss me off if someone else come out with the same thing I've been working on before I get to finish mine. P.S. Mine is designed for the 94 accord I have, no k shifter cable bullshit... AKA you should buy one from me. The design for a functional pro-type is 90% done, I just gotta jet my shop finished so I can get the CNC running again.
You know... those options just aren't good enough. They aren't rhmt enough.
we need shit that has pie cuts, bird shit flux welds, junkyard salvage, zip ties, jb weld, and orange chicken to be on front page
My car has all this but no orange chicken. Just sayin
Ill take one!
well said.
Agreed. Most of us are in our 30 ' s now except for a few. More money, more power.....
27, more money, and more experience does help!
-
Truck got retuned a couple nights ago.. She get down. Wants fuel soo fucking bad and its maxxed injectorwise now... EGTs in the 1350 range all the way up top... Sticks and CP3 upgrade at tax time... Its makin about 525-550/1000-1100 right now Im sure... Pulls most excellent :)
She wants to eat BAD.... Kinda cool, Anarchy Diesel (Who tunes it) put it up on their page :)
New prototype Sequential shifter setup with K cables and K to H cable /trans bracket...
Who the fuck are you getting a sequential shifter from? I wonder if its anyth ing like the one I have been designing! That would really piss me off if someone else come out with the same thing I've been working on before I get to finish mine. P.S. Mine is designed for the 94 accord I have, no k shifter cable bullshit... AKA you should buy one from me. The design for a functional pro-type is 90% done, I just gotta jet my shop finished so I can get the CNC running again.
You know... those options just aren't good enough. They aren't rhmt enough.
we need shit that has pie cuts, bird shit flux welds, junkyard salvage, zip ties, jb weld, and orange chicken to be on front page
My car has all this but no orange chicken. Just sayin
Why would I buy one when someones GIVING me one ;) . Its not a new concept, People have adapted Evo Seq shifters and built their own before... You're far from the first my man LOL :)
R&D is done already, prototypes built. They are 3 going to different people... Im the Honda Guinea pig, theres a Neon, and an Evo too...its shipped and on the way to me right meow. Its a big company, well known across motorsports :).
.. This is a functional beta test of prototype hardware, I cant (WONT) say who here (yet) as doing so has fucked me before.
Im CHOOSING to run "K cable bullshit" because they are a fuckload stronger than Accord/prelude shit and mine are smoked anyways, that and Im getting these on the low too, with Spherical solid billet ends...
Also that way if I dont like the Seq setup, I can swap the Ktuned billet race shifter I already have in it without a lot of fucking around. Thinking 3 steps ahead, just like always sir O0
The car is apart and getting a moly cage (Josh Ross - Random Hero here is doing it), bigger turbo, bigger injectors 275 M&Hs on the front of it( Will be doing bodywork to the fenders to make them sit like booboo under the fenders, slight turning radius loss but on caps still ).
(https://scontent-b-sjc.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/10458795_10152363999325378_7439983634812819307_n.jpg?oh=9a5230e21a1618a70086aef01998ee42&oe=54D18DE3)
(https://scontent-a-sjc.xx.fbcdn.net/hphotos-xpa1/v/l/t1.0-9/10392449_10152380348385378_7019089189003983508_n.jpg?oh=5e1f6cf2be84e25666af89385ab90b3c&oe=55050374)
Ill post a couple pics of progress probably. No shit show build thread.
-
Truck got retuned a couple nights ago.. She get down. Wants fuel soo fucking bad and its maxxed injectorwise now... EGTs in the 1350 range all the way up top... Sticks and CP3 upgrade at tax time... Its makin about 525-550/1000-1100 right now Im sure... Pulls most excellent :)
She wants to eat BAD.... Kinda cool, Anarchy Diesel (Who tunes it) put it up on their page :)
We have some 5.9 injectors out of the race truck for sale right meow: http://www.competitiondiesel.com/forums/showthread.php?t=175898 (http://www.competitiondiesel.com/forums/showthread.php?t=175898) They will run nice and cool and max those turbo's right out at ~900hp or so, and still give you lot's of room to grow.
We have moved on to 6.7 style and bigger, and are buying bigger yet again this spring.
-
Im looking at like 120-150s max sir.. Too bookoo for me, and my wallet id immagine ;)
-
BDV FTW!
-
Fuck yeah!!!! I love it when bdv put updates on the site. Just wish he would do his whole build as it goes along.
-
Im looking at like 120-150s max sir.. Too bookoo for me, and my wallet id immagine ;)
They are like 150's... 12 of them... LOL
We also have some 54lpm ddp nozzles around that I am sure we would let go cheap.
Just remember putting a large injector in a diesel is no different than putting a 1000cc injector in a 300whp Honda. It doesn't hurt anything, just gives you room to grow, or for nitrous.
-
I want to have a brodozzer race off with you.
-
Im looking at like 120-150s max sir.. Too bookoo for me, and my wallet id immagine ;)
They are like 150's... 12 of them... LOL
We also have some 54lpm ddp nozzles around that I am sure we would let go cheap.
Just remember putting a large injector in a diesel is no different than putting a 1000cc injector in a 300whp Honda. It doesn't hurt anything, just gives you room to grow, or for nitrous.
My buddy Jareds a tech out at Dynomite, Im actually headed out there after work :) Im looking at like 120-150s i think :)
-
I want to have a brodozzer race off with you.
I would like that, loser wears a Monster Flat billed hat for a month
-
Im looking at like 120-150s max sir.. Too bookoo for me, and my wallet id immagine ;)
They are like 150's... 12 of them... LOL
We also have some 54lpm ddp nozzles around that I am sure we would let go cheap.
Just remember putting a large injector in a diesel is no different than putting a 1000cc injector in a 300whp Honda. It doesn't hurt anything, just gives you room to grow, or for nitrous.
Talk to me about hte nozzles so around 200s????
are they compatable with stock 07 boduys?
-
I want to have a brodozzer race off with you.
I would like that, loser wears a Monster Flat billed hat for a month
t
Haha!!! I'd be in for that as ruff as it would be. Would be a good race.
-
Well, I dam sure can't beat free.
Its all good though. Honestly, I would have been surprised if no one else had thought of it.
-
Brett... By my math that makes those tips 100s? Im into that ghook up the rdirty ass deal
-
Brett... By my math that makes those tips 100s? Im into that ghook up the rdirty ass deal
They would be a bit bigger than 100's probably more like 150's. Yes they will work with stock 07 bodies. I will talk to Torrey tomorrow once he gets home from the bush, and let you now what he wants for those.
-
Brian, I sent you a text with the nozzle price.
-
I want to have a brodozzer race off with you.
I would like that, loser wears a Monster Flat billed hat for a month
t
Haha!!! I'd be in for that as ruff as it would be. Would be a good race.
I would like to see this race.
-
I believe I would be in trouble after you get some fuel in that thing. I'm pretty sure I have you covered now.
-
Sold. I want.
-
going to try and change the front page weekly!
well that lasted for exactly 1 week.
-
Lol!!
-
get me them nozzles Brett.
-
get me them nozzles Brett.
7 Nozzles and tool shipped today.
-
nice
-
get me them nozzles Brett.
7 Nozzles and tool shipped today.
Ya paypal sent. He sent me a 7th brand new one too... Ill put the arson 3 in tomorrow :) Phil knows whatsup and is working on getting me a set of CSP5 tunes for it next week.
Thanks BRett
-
"poor pedestrians" - MAtt Kaiser
-
I need some vids of a boosted launch when it's all setup. :noel:
-
I need some vids of a boosted launch when it's all setup. :noel:
So a picture of a broken input shaft?
-
Im not dumb with it... I htink the highest ive brake boosted it on a dig is like 5 pounds...
-
Well then you will have allot of trouble getting around mine then lol.
-
I leave by rpm, too hard to try to keep boost at a certain number, all over the map
-
I want to see this race!!! Chad would have to drive down here though.
-
id do it. warranty would pay for 90% of the billet parts anyways lol
-
(https://scontent-b-sea.xx.fbcdn.net/hphotos-xap1/v/l/t1.0-9/1234516_10152525923795378_8614348816861246982_n.jpg?oh=302fc708e60eb0e8e2b6e65a16342959&oe=556952E9)
(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/10983397_10152525923905378_7731842123444941341_n.jpg?oh=31dd97d25c2103ab73014ebf289d4996&oe=5558E5B0&__gda__=1431837397_a3a8956e47e3ae86107ab99f9e63e029)
;) Thanks Brett, thank torrey for me too.. I have a tune in my email too... :)
-
Nice!
Now do work!
I will text Torrey right meow.
-
Big man front page is yours! :noel:
-
Nextto change after fuel upgrades will be a bigger secondary at which point my fresh as fuck HE351CW with Billet Wicked Wheel compressor wheel (And deleted WG sol) will be up for sale ;)
-
Nextto change after fuel upgrades will be a bigger secondary at which point my fresh as fuck HE351CW with Billet Wicked Wheel compressor wheel (And deleted WG sol) will be up for sale ;)
I would go to a billet 80mm compressor on the primary before upgrading your secondary, but that is just me. I would also put a billet input shaft in the trans before any of it.
Did you get that bag of CP3 parts in yet? How about those sticks?
-
havent put shit in yet
-
havent put shit in yet
:'(
-
Bump for spiker needing to get that shit in his truck.
-
bump for no rippers posted.... ::)
-
bump for no rippers posted.... ::)
Ran 13.41 at 100.8
-
bump for no rippers posted.... ::)
Ran 13.40 at 100.
With the Cp3 upgrade and sticks?
-
No sir. 10 PSI launch max effort tune Stock sticks and CP3 still... 13.41... 1st hit 5 PSI launch 13.58 at 100.36... 2nd hit 10 psi launchg 13.49 @100.72... 3rd hit 15 PSI launch 13.41@100.71
(https://scontent-sea.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/10392279_10152578462335378_7771733149490685687_n.jpg?oh=38d1b3960a84e38153ce487c31e57cef&oe=55875998)
https://fbcdn-video-c-a.akamaihd.net/hvideo-ak-xta1/v/t42.1790-2/11061160_428731070628227_1089635059_n.mp4?rl=351&vabr=195&oh=0cc6ba5400058e1a0abc57b1088b4134&oe=54FD3BE2&__gda__=1425883092_b21d7ba08c8355bcd7b44f71cf8c7c90
Now ive run it I need to dyno it on stock setting and max setting to see what it gained over the edge and single...
I have a stock and hot-unlock dyno sheet for the EDGE, SO this will be the dyno for what the efi and compounds did stock and max effort, then When I get it back from repair (Oh, did i not mention i broke the output shaft... Or somehting in the trannsfer case on the last 20 pound launch? Hence no 12.90-13.10 lol;) )
... Im putting the nozzles and arson it and will run it and dyno it again.. I WILL NOT 20 PSI launch it agian.. It felt amazing, but I dont need the problems. I ONLY wanted it to dip the 12s, and its gonna do that EASY on those nozzles and Arson kit withouut havinhg to launch it hard and break shit :)
She feels goo, Im sure with some 33s on it or somehting it would dip 12.99-13.1... Its def making 500... I was thinking 520? Phil at Anarchy thought t was around 540 by t he numbers vs 7250 weight of the truck... compensating for 1/2 tank of fuel and lighter ri/ tire pkg...
Im happier than shit LOL.
-
About 510whp on the compd calculator at that weight. Which is a solid number on those big tires.
It will be an easy 12sec truck with the upgraded fuel.
-
24.3 @ 52mph... who was in the left lane? lol.
-
24.3 @ 52mph... who was in the left lane? lol.
other than you, Who Cares?
-
I only cared for the moment I noticed it. don't care so much now. but that's slow. must have been a golf cart....
-
About 510whp on the compd calculator at that weight. Which is a solid number on those big tires.
It will be an easy 12sec truck with the upgraded fuel.
pEOPLE ON ANOTHER FORUM WERE SAYING THE VID WASNT AWORKING...
Vid of the 13.41 Pass :
https://www.facebook.com/video.php?v=428730787294922&set=vb.100004740130059&type=3&theater (https://www.facebook.com/video.php?v=428730787294922&set=vb.100004740130059&type=3&theater)
-
people on other forums are also faggots, video worked fine here.
-
Buddy got a good pic of the 13.41 hit...
(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10544368_10152583128940378_8206964396494603304_n.jpg?oh=25a3110136eb932016eefc8be95abc40&oe=5573245B&__gda__=1434959652_09699864ca76cc9be8c7ac4230c54d4c)
-
Killer photo. Need one with you leaving the line with boost set on nog!!!
-
Boost is always set on nog. The only thing that limits boost is how much fuel you feed the bitch.
-
Awesome pic! good times for such a heavy beast. I want the SC kit for my Tacoma so I can do this: https://www.youtube.com/watch?v=nkL7JXS6Q6I (https://www.youtube.com/watch?v=nkL7JXS6Q6I)
-
Going twins on the 06 Mega I'm picking up at the end of the month. Already has a BD Killer B, gonna throw an S480 in there for good measure. Phil did the tuning on the current setup, TRE full built fatshaft trans.. Gonna be fun!
-
Going twins on the 06 Mega I'm picking up at the end of the month. Already has a BD Killer B, gonna throw an S480 in there for good measure. Phil did the tuning on the current setup, TRE full built fatshaft trans.. Gonna be fun!
Need some injectors? We just found a slightly bigger set than we just sold spiker in a box in the race trailer. I think his were 55lpm and these are 60 or 65? We are not sure if we ever even ran them or if we bought them and then swapped the exergy 300% in before we had a chance. Those exergy's just sold, slowly cleaning up the race trailer.
-
Good numbers for stock fuel and brodozzer tires!!
-
Going twins on the 06 Mega I'm picking up at the end of the month. Already has a BD Killer B, gonna throw an S480 in there for good measure. Phil did the tuning on the current setup, TRE full built fatshaft trans.. Gonna be fun!
Need some injectors? We just found a slightly bigger set than we just sold spiker in a box in the race trailer. I think his were 55lpm and these are 60 or 65? We are not sure if we ever even ran them or if we bought them and then swapped the exergy 300% in before we had a chance. Those exergy's just sold, slowly cleaning up the race trailer.
Probably. What else ya got?
-
Going twins on the 06 Mega I'm picking up at the end of the month. Already has a BD Killer B, gonna throw an S480 in there for good measure. Phil did the tuning on the current setup, TRE full built fatshaft trans.. Gonna be fun!
Need some injectors? We just found a slightly bigger set than we just sold spiker in a box in the race trailer. I think his were 55lpm and these are 60 or 65? We are not sure if we ever even ran them or if we bought them and then swapped the exergy 300% in before we had a chance. Those exergy's just sold, slowly cleaning up the race trailer.
Probably. What else ya got?
Sorry was on vacation in the DR didn't really look at the internet for a week.
Let me check with Torrey and see what all is still available / what more he has found.