:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: 90dx on May 25, 2009, 08:57:18 AM

Title: Project ten second D15
Post by: 90dx on May 25, 2009, 08:57:18 AM: Well couldnt cut and paste with updates from the old thread so i will start over.

Well decided to put the VX back together this year after selling the old setup off and stripping it down.Here was the old setup

(FUCK OLDhmt!!!!) ran some 11.6 at 118mph with that and now looking to go tens. Big thanks to dvst8r for the help with the roll bar and other stuff.I decided enough of the B series shit time to get back to the dirty D :y

92 Civic VX Comp Eng roll bar kit me and Brett [dvst8r] welded in,painted by a old drunk guy in his barn/garage thing :D its stripped inside with a alum dash that cost $60 O0

Motor- D15B vtec 75mm Vitara pistons,FJT rods,Crespo springs and retainers :l, Colt cams regrind,Skank int mani,edelbrock TB

Tranny- stock SI/EX tranny replaced a couple seals and a bearing as well added a OBX diff and a LSD 6puck sprug disc heavy duty pressure plate and 12 lb steel flywheel.

Turbo- Holset HE351CW,Eville140 manifold,CDM 38mm gate,CDM 50mm blow off valve,Peakboost front mount and charge pipes from Urban Indians kit and a white tent 4" mild steel downpipe to CDM SS 3" catback :P

Fuel/Management- ECtune,chipped P28,Hondata 4bar,Precsion 880's,Walbro 255,Aeromotive regulator,LC1 WB and fuel lines half converted to -6

Suspension needs som attention its pretty much stock with Skunk 900lb rear springs will get some shocks,urethne bushing and traction bars this winter.

Pics so far.I cut most of the brake lines out when I stripped it down and was gonna do a tuck etc but then realized im way to lazy for all that bending so i bought a box of Russell Speedflex hose and made SSlines instead way easier way to make brake and clutch lines :6

Strip down and new rad support

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FCivicVXbuild08002.jpg&hash=f8cf524fed46cf5cad9fd08c9261f7405756c915)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FCivicVXbuild08004-1.jpg&hash=51612a3bd28f31ef92b428d4d41fc0ba334090b4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FCivicVXbuild08006.jpg&hash=3beb2f0cceae606f8c3dc6af9e38ab60cc95976f)

Roll bar install

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FInjectorsforsale001.jpg&hash=d9a84e88fcde2cde673d8cd3d118e9f0f1052330)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi50.photobucket.com%2Falbums%2Ff340%2F90dx%2FInjectorsforsale005.jpg&hash=4da22f2fb1adb86c29b8e8f0c600d35207845570)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi50.photobucket.com%2Falbums%2Ff340%2F90dx%2FInjectorsforsale007.jpg&hash=70cc9fcf31fb852c75414d066a0f4f6aa873905a)

Got the car back from the painter he did a great job for the price he did the body work,painted the exterior,engine bay and the interior.Installed the alum dash need to cutout more holes for 2 1/16 gauges and cut it out for the SI cluster i got.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FCivicVXbuild08006-1.jpg&hash=2c3b2a72317d9dd9646692425989b27918fe2083)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FCivicVXbuild08005.jpg&hash=07ffb085390ef46213c1bbdd70620f25c7dc1467)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FCivicVXbuild08004.jpg&hash=fc701fb91a3eef94252f541717f4f017e7ec771c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FCivicVXbuild08003.jpg&hash=148d92726116d6fd96a2c2db70b83caf86fd6a65)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FJune19006.jpg&hash=adb9280050ceeda996c81350e50f74dcd693a840)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FJune19009.jpg&hash=9940f93df2c771cb383ce73c6aa95b0191bdea7e)

Assembled the motor and tranny the piston to wall clearance is .0fuckinghuge i can damm near drop a wrench through :-X

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FD15Bbuild001-1.jpg&hash=76b9cbf1c190ba3f46d60414fb98622c22d664cb)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FD15Bbuild002-1.jpg&hash=acc47de8cdb00520733fac884d728bf19c025e09)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FD15Bbuild003.jpg&hash=ebc99012ad9a5e003497fa499452bf656321fb8c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FJune19010.jpg&hash=4ba847f6a3e0553b44816d9f48fa0081bead766e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FJune19015.jpg&hash=377ca8f13496c1e58c92953aa2649ccd5549f4c8)

Got the engine bay ready with new brake lines and dropped the motor in

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FJune19017-1.jpg&hash=bbce39f67d35edd0ec6983d91ac47a1ebe2a2847)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FJune19020-1.jpg&hash=0cc998dedbc499964ca292b2c9fbe4ac96ac71f6)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FJune19027.jpg&hash=63b8fa0a845e1a4783c3aeb5962bfbf15a180f8f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FJune19024.jpg&hash=b6a159c3ddd1567b7c18a2e15594be922af302cb)

Downpipe is gonna be tight need to get creative to fit a 4" pipe between the clutch slave

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FJune19025.jpg&hash=e3db06e134d1630f3010d6f4e2832667756daa34)
Title: Re: Project ten second D15
Post by: 90dx on May 25, 2009, 08:58:46 AM: I will post some pics today of where its at now.Just about done but i have some computer/ostrich/ectune issues :-\
Title: Re: Project ten second D15
Post by: dvst8r on May 25, 2009, 09:56:15 AM: I was wondering if this post was ever going to happen. :P
Title: Re: Project ten second D15
Post by: Dr. D-Series on May 25, 2009, 10:46:28 AM: Love your build.

Id pay a decent amount of money for a dash like that.
Title: Re: Project ten second D15
Post by: crxvtec91 on May 25, 2009, 12:00:38 PM: Nice build, simple and clean. BTW I edited out the link.
Title: Re: Project ten second D15
Post by: ratcityrex on May 25, 2009, 01:22:32 PM: pimpin ride, looks good!
Title: Re: Project ten second D15
Post by: glustic on May 25, 2009, 03:47:10 PM: I can tell this is gonna be one of my fav builds. Keep up the good work.
Title: Re: Project ten second D15
Post by: imburne on May 25, 2009, 06:40:45 PM: subscribed.
Title: Re: Project ten second D15
Post by: marcj on May 25, 2009, 07:16:18 PM: fucking baller !!!!!!!
Title: Re: Project ten second D15
Post by: 89shithatch on May 25, 2009, 07:17:57 PM: in
Title: Re: Project ten second D15
Post by: 92CXyD on May 25, 2009, 08:31:10 PM: I remember this build on OHMT ;D
Title: Re: Project ten second D15
Post by: 89shithatch on May 25, 2009, 08:54:25 PM: looks like there was not much progress between that thread and this one anyway. :?:
Title: Re: Project ten second D15
Post by: dvst8r on May 25, 2009, 09:05:04 PM: Quote from: 89shithatch on May 25, 2009, 08:54:25 PM
looks like there was not much progress between that thread and this one anyway. :?:

90dx is kinda like a bear, he is hungry and grumpy when he wakes up, and he sleeps all winter.
Title: Re: Project ten second D15
Post by: 90dx on May 25, 2009, 09:42:52 PM: Test

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture008-1-1.jpg&hash=2410c08714ae5dcab7d60c7517bf26ad9da40d54)
Title: Re: Project ten second D15
Post by: schim187 on May 25, 2009, 09:47:04 PM: Awwwww Sheeiit! Looking very nice :yes:
Title: Re: Project ten second D15
Post by: glustic on May 25, 2009, 09:47:17 PM: Sexy as fuck.
Title: Re: Project ten second D15
Post by: dvst8r on May 25, 2009, 10:01:34 PM: I liked the battery in it's old location much better. Did you throw out the mount?
Title: Re: Project ten second D15
Post by: Travis on May 25, 2009, 10:10:49 PM: :)
Title: Re: Project ten second D15
Post by: 90dx on May 25, 2009, 10:20:37 PM: Quote from: dvst8r on May 25, 2009, 10:01:34 PM
I liked the battery in it's old location much better. Did you throw out the mount?

Sold it :D
Title: Re: Project ten second D15
Post by: dvst8r on May 25, 2009, 10:22:03 PM: Judging by the huge ricer muffler, you sold the vibrant flat black too.
Title: Re: Project ten second D15
Post by: brine04 on May 25, 2009, 10:27:36 PM: I call bullshit on the ecutune. You are going 90dx style and using this
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FJune19021-1.jpg&hash=c2842ec7655a186ac888da570b4672bafa7093c6)
Title: Re: Project ten second D15
Post by: dvst8r on May 25, 2009, 10:29:33 PM: Hmm that does look like 90dx's work bench.
Title: Re: Project ten second D15
Post by: 90dx on May 25, 2009, 10:44:06 PM: Okay some updates so the car is mechanically done just needs some finishing electrical inside the car i have a 3 3/8 " tach to go in beside the Tuner View as i prefer a standalone tach even though the Tuner View has one.As well i need to finish routing the interior harness make a mount for the ecu.Last the windshield needs to go in once i know all the gauges are working properly everything is routed cleanly etc. You cant take the dash out with the glass in :D

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture010.jpg&hash=d4d331566e11016ea3c571cfb4992ac427f8f216)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture009.jpg&hash=bc46e2d8b33b01c8464f9185e5e5ed36587ada0f)

The downpipe is 4" adapter cut down then 3" looped around in a U coming back down under the pan then a flex into a vband.Its all flux core madness so i wrapped it after as its gonna cook the clutch slave its actually touching :?: The wastegate dump is 44mm stainless tube fluxcored to a 38mm mild steel flange :D Should fall off at some point but i will get some bends in to make a new pipe rerouted into the D.P later on.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture011.jpg&hash=e21998928a2be3d43717bf05e21ebf2283bde9e1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture012.jpg&hash=5942a8beb017758d2b4fdb628b02d6ebc21643fc)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture015.jpg&hash=5529e417284c16eba8301157ec275a66a8044599)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture017.jpg&hash=fedc28263d5c588c000e7fe54be910d68afbbe3c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture019.jpg&hash=73368fc55e712277f4cbdab6f85ce4b213fc9359)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture022.jpg&hash=ae911d2c4ae80bb08c5135b9a98d28128ea65bee)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture023.jpg&hash=b73b8aab4917854b237520eb94a342992c2abcb0)

Got these traction bars from skinny boys fab shop via ebay they were $199 and really well made nice quality joints etc O0

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture026.jpg&hash=c1ff763ffe02c7f98dfd455c0d81f8aa924b0ec7)

The car is running a CDM $149 3" stainless catback the fitment is good but the muffler is brutal fart cannon :-X This will be changed out for a Vibrant flat black at a later date when i have some money.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture025.jpg&hash=dc616cd1b31b82d7d14ec273772e23adbd708a3f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture027.jpg&hash=62290a2b54dd5c9a8b255088869cfb4d864a457c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture029.jpg&hash=51f2b2970fb5fd1665a35b1a4732dc62024249c3)
Title: Re: Project ten second D15
Post by: 90dx on May 25, 2009, 10:50:49 PM: Now the bad news my brand new Ostrich v2.0 is bunk i think :'( It will not show up via the Moates firmware updater or ECtune and i tested this on two computers here then on Urban Indians laptop against his Ostrich where it does not show up either. >:( I think it needs to be sent back to Moates/Xenecron to be inspected. I might toss either some stock EF 240's in and a stock map sensor to break it in or try firing up my old Willems Burner and get Crome running but i dont want to be buring ten chips to get the idle-2000 rpms at a good AFR for warm up first cycle. This fucking blows.Ectune is really nice software though i made a basemap its really user friendly and smooth interface lots of options etc. I just wish i could burn chips with it.
Title: Re: Project ten second D15
Post by: pistol on May 25, 2009, 11:06:30 PM: how late you working till tomorrow.

maybe try and come supervise me and levi put in his motor
Title: Re: Project ten second D15
Post by: dvst8r on May 25, 2009, 11:08:49 PM: Looks good, when you come out to castrol, we can fix the fluxcored madness, and put a vibrant on it. Even if I have to drag the tig all the way to Edmonton.
Title: Re: Project ten second D15
Post by: glustic on May 26, 2009, 04:56:55 PM: Nice work. Just remember man, you always run into problems when messing with your car. I got my shit turboed finally, and my 5th get syncro sleeve took a shit after the bearing above it decided to take a shit. Shitty thing is I was on the way the get it tuned. Good luck with the build, its coming together nicely.
Title: Re: Project ten second D15
Post by: d112crzy on May 26, 2009, 05:11:28 PM: Send the Ostrich back to Moates. They'll fix it for you, fo free. Just get in contact with them first before you send it to them.

http://support.moates.net/ (http://support.moates.net/)

http://www.moates.net/index.php?cPath=52 (http://www.moates.net/index.php?cPath=52)
Title: Re: Project ten second D15
Post by: HiProfile on May 26, 2009, 08:19:52 PM: Have you viewed that tunerview at an angle before? You may want to box it out (or in) so you view it flat instead.
Title: Re: Project ten second D15
Post by: Joseph Davis on May 26, 2009, 11:08:25 PM: You need to buy a nitrous kit. Haven't you heard? 9's are the new 10's.
Title: Re: Project ten second D15
Post by: 92CXyD on May 27, 2009, 12:03:28 AM: Quote from: Joseph Davis on May 26, 2009, 11:08:25 PM
You need to buy a nitrous kit. Haven't you heard? 9's are the new 10's.

Nice ;D
Title: Re: Project ten second D15
Post by: dvst8r on May 27, 2009, 12:10:36 AM: Quote from: Joseph Davis on May 26, 2009, 11:08:25 PM
You need to buy a nitrous kit. Haven't you heard? 9's are the new 10's.

I think that turbo has enough in it for 9's, but I doubt that transmission does.
Title: Re: Project ten second D15
Post by: 90dx on May 27, 2009, 01:41:01 AM: Verified the Ostrich is bunk tonight so pack it up to ship out tommorow :'( I'm not sure what to run the car on for the mean time or just wait to get the Ostrich back, I could use Crome and my Willems burner but that shit is getto. I will get the wiring finished up after my 4 day tour on the weekend.Went to help Urban Indian out this evening but it was total cluster fuck/failure scene there :D
Title: Re: Project ten second D15
Post by: Passenger on May 27, 2009, 02:16:41 AM: Quote from: dvst8r on May 25, 2009, 11:08:49 PM
Looks good, when you come out to castrol, we can fix the fluxcored madness, and put a vibrant on it. Even if I have to drag the tig all the way to Edmonton.

::)

You know you are a lazy bastard when...
When you call picking up your 45lb dynasty200dx "dragging it around".

:-*
Title: Re: Project ten second D15
Post by: Passenger on May 27, 2009, 02:18:44 AM: Quote from: 90dx on May 27, 2009, 01:41:01 AM
Verified the Ostrich is bunk tonight so pack it up to ship out tommorow :'( I'm not sure what to run the car on for the mean time or just wait to get the Ostrich back, I could use Crome and my Willems burner but that shit is getto. I will get the wiring finished up after my 4 day tour on the weekend.Went to help Urban Indian out this evening but it was total cluster fuck/failure scene there :D

So honestly, is it going to be ready for the weekend? Or is there just all sorts of Indian Fail going on?
Title: Re: Project ten second D15
Post by: caged on May 27, 2009, 02:30:57 AM: The build is looking good :)
Title: Re: Project ten second D15
Post by: trevor72 on May 27, 2009, 01:42:39 PM: Can't wait to see some colour in that hot mini ram mani or w/e its called. Looks awesome dude, glad you got back on this.
Title: Re: Project ten second D15
Post by: Joseph Davis on May 27, 2009, 06:28:31 PM: INDIAN FAIL LOL

ok
Title: Re: Project ten second D15
Post by: 90dx on May 28, 2009, 04:46:22 AM: Okay RMA from Moates done he is good to deal with as always unfortunetly though the shipping is gonna cost me $100 to get it there and back in a faster then the USPS tuna boat method :-X As far as running a 9 i am pretty leary about this SSR 4.7 final drive i have in the tranny along with the general D series shitty trannyness that is always looming :?:
Title: Re: Project ten second D15
Post by: Joseph Davis on May 28, 2009, 09:03:41 AM: So you'll shear a FD trying to launch super hard on anything bigger than a 24.5" slick, or trying to bang gears. Do like the rest of the world and pile on the power to offset mild driving.
Title: Re: Project ten second D15
Post by: dvst8r on May 28, 2009, 10:11:54 AM: Quote from: 90dx on May 28, 2009, 04:46:22 AM
Okay RMA from Moates done he is good to deal with as always unfortunetly though the shipping is gonna cost me $100 to get it there and back in a faster then the USPS tuna boat method :-X As far as running a 9 i am pretty leary about this SSR 4.7 final drive i have in the tranny along with the general D series shitty trannyness that is always looming :?:

You should grab the Indian's Burn1 and at least get it fired on a chip.

I just saw that turbo make 545WHP on a CR Cummins, So it should have no problem making 600+ on a Honda.
Title: Re: Project ten second D15
Post by: onlyflash944 on May 31, 2009, 09:52:05 PM: whats the over under for how long that bay stays pearly white?

nice build tho, still a little skeptical about the cage and the rear shock towers.
Title: Re: Project ten second D15
Post by: dvst8r on May 31, 2009, 10:05:51 PM: Quote from: onlyflash944 on May 31, 2009, 09:52:05 PM
whats the over under for how long that bay stays pearly white?

nice build tho, still a little skeptical about the cage and the rear shock towers.

I am a little skeptical about the bars tying into two 1/8th plates sandwiching the floor, but it pass's NHRA tech... The shock tower is probably the most reinforced place on the car, as it has to carry the weight of the car. I could have put the bars to the floor, but having built a number of off-road cages that have been flopped and rolled, I would trust my life to that setup. Albeit I wish we would have done the front half and not just the roll bar, but that was 90dx's call not mine.
Title: Re: Project ten second D15
Post by: danz on June 09, 2009, 02:45:15 AM: (https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi170.photobucket.com%2Falbums%2Fu247%2F90dx_2007%2FPicture029.jpg&hash=51f2b2970fb5fd1665a35b1a4732dc62024249c3)

POWER FUCKING FIST.

i didnt know u were local. nice.
Title: Re: Project ten second D15
Post by: tandrew23 on June 09, 2009, 07:47:54 AM: this may be hmt but orange rtv will not hold up on that there wastegate buddy
Title: Re: Project ten second D15
Post by: Lowerit on June 09, 2009, 08:49:13 AM: Power Fist...

WTF?

You rocking the P.A Ching Chong goodness?
Title: Re: Project ten second D15
Post by: dvst8r on June 09, 2009, 10:11:43 AM: Quote from: danz on June 09, 2009, 02:45:15 AM
POWER FUCKING FIST.

i didnt know u were local. nice.

90dx is the pg crew, OG.
Title: Re: Project ten second D15
Post by: 90dx on June 09, 2009, 10:24:54 AM: Quote from: tandrew23 on June 09, 2009, 07:47:54 AM
this may be hmt but orange rtv will not hold up on that there wastegate buddy

Its copper high temp exh sealant ;) Still nothing back from Moates :'( I have to head to school for a couple weeks on Sunday so i dont think there will be any updates for a while.And Danz yes I go by 89hatch on VCC and this would be home made setup number 5 been doing this for quite a while now O0
Title: Re: Project ten second D15
Post by: hotrex on June 11, 2009, 05:35:03 AM: Quote from: tandrew23 on June 09, 2009, 07:47:54 AM
this may be hmt but orange rtv will not hold up on that there wastegate buddy

stfu nigger
Title: Re: Project ten second D15
Post by: Loki on June 11, 2009, 10:23:15 PM: Looks good Matt.
Title: Re: Project ten second D15
Post by: Travis on June 11, 2009, 11:26:11 PM: Quote from: Loki on June 11, 2009, 10:23:15 PM
Levi and I will give you mad road head/jerk session for a ride

:?:
Title: Re: Project ten second D15
Post by: yamaha6611 on June 12, 2009, 12:44:13 AM: i havent read 100% of this, but... is this a race only car? if so, ditch that exhaust

looks good though, very clean
Title: Re: Project ten second D15
Post by: dvst8r on June 12, 2009, 12:53:30 AM: Quote from: yamaha6611 on June 12, 2009, 12:44:13 AM
i havent read 100% of this, but... is this a race only car? if so, ditch that exhaust

looks good though, very clean

90dx plans to drive it on the street as well. It will be a street legal race car, as such is kind of trying to keep it "low profile"
Title: Re: Project ten second D15
Post by: Loki on June 12, 2009, 01:01:55 AM: Quote from: Travis on June 11, 2009, 11:26:11 PM
Quote from: Loki on June 11, 2009, 10:23:15 PM
Levi and I will give you mad road head/jerk session for a ride

:?:

:-X
Title: Re: Project ten second D15
Post by: brine04 on November 07, 2009, 06:44:46 PM: Bump
Title: Re: Project ten second D15
Post by: Joseph Davis on November 07, 2009, 07:40:55 PM: ok
Title: Re: Project ten second D15
Post by: dvst8r on November 07, 2009, 07:56:37 PM: Rumor has it, this was sold before completion, and all that is left is fail. :-\
Title: Re: Project ten second D15
Post by: boosted 00 black si on November 07, 2009, 09:40:32 PM: i like
Title: Re: Project ten second D15
Post by: 90dx on November 08, 2009, 01:04:52 AM: No it runs and motor is just about broke in. Needs a tune soon but that will be done in spring. I will post some pics soon.
Title: Re: Project ten second D15
Post by: Loki on November 09, 2009, 07:18:19 PM: Quote from: 90dx on November 08, 2009, 01:04:52 AM
No it runs and motor is just about broke in. Needs a tune soon but that will be done in spring. I will post some pics soon.

Good work.
Title: Re: Project ten second D15
Post by: brine04 on November 09, 2009, 10:57:05 PM: Quote from: 90dx on November 08, 2009, 01:04:52 AM
No it runs and motor is just about broke in. Needs a tune soon but that will be done in spring. I will post some pics soon.
But is it still your car?
Title: Re: Project ten second D15
Post by: 90turboteg on November 10, 2009, 12:35:44 AM: ya update nog :P
Title: Re: Project ten second D15
Post by: 90dx on November 10, 2009, 11:26:30 AM: No I sold it to someone i know. He will let me take it for some passes at the track in spring when they open up. Got 4500 and a super JDM style LS/Vtec EF for it :?: The new owner ordered some wide front fenders for it should look really good. The Tunerview is giving me a little grief getting it working right but other then that it runs nice no leaks sounds good too.
Title: Re: Project ten second D15
Post by: dvst8r on November 10, 2009, 11:37:52 AM: How about an update with pics and vid... :P