:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: bouncinofftherevlimiter on June 24, 2009, 07:22:41 PM

Title: getting car to idle with 3 wire IAC, drill TB blade??
Post by: bouncinofftherevlimiter on June 24, 2009, 07:22:41 PM
the intake on my car is off a F20B, (from accord sir-t) and it has a 3 wire IAC. i cant seem to find any way to make it work with OBD1 and crome. right now im just using throttle cable tension and i hate how it is unreliable, it is all over the place and you constantly have to slap the pedal coming up to a light or any sort of stop so it dosent idle at 2500...

i remember an old trick from the domestic days was to drill a small hole in the primary blades of the holley carbs to help big cam cars idle. should i try that or is it going to cause problems? dont know how it will but just thought i would ask. i think im still going to have to use cable tension, but i thought maybe this would make it better.
Title: Re: getting car to idle with 3 wire IAC, drill TB blade??
Post by: ratcityrex on June 24, 2009, 07:58:58 PM
Just disconect it, adjust your idle screw and adjust your throttlestop and call it a day.
Title: Re: getting car to idle with 3 wire IAC, drill TB blade??
Post by: chris on June 24, 2009, 10:14:22 PM
Numerous companies make a flange so you can add a 2 wire iacv to that manifold
Title: Re: getting car to idle with 3 wire IAC, drill TB blade??
Post by: bouncinofftherevlimiter on June 24, 2009, 10:25:50 PM
Quote from: chris M on June 24, 2009, 10:14:22 PM
Numerous companies make a flange so you can add a 2 wire iacv to that manifold


i searched all over with no avail.

if you could please send me a link i will appreciate it

thank you very much
Title: Re: getting car to idle with 3 wire IAC, drill TB blade??
Post by: chris on July 06, 2009, 06:26:19 PM
locashracing.com
Title: Re: getting car to idle with 3 wire IAC, drill TB blade??
Post by: glustic on July 06, 2009, 07:27:29 PM
Quote from: chris M on July 06, 2009, 06:26:19 PM
locashracing.com

http://www.locashdyno.com/store2/index.php?main_page=product_info&cPath=70&products_id=256 (http://www.locashdyno.com/store2/index.php?main_page=product_info&cPath=70&products_id=256)
Title: Re: getting car to idle with 3 wire IAC, drill TB blade??
Post by: bouncinofftherevlimiter on July 06, 2009, 09:04:05 PM
Quote from: glustic on July 06, 2009, 07:27:29 PM
Quote from: chris M on July 06, 2009, 06:26:19 PM
locashracing.com

http://www.locashdyno.com/store2/index.php?main_page=product_info&cPath=70&products_id=256 (http://www.locashdyno.com/store2/index.php?main_page=product_info&cPath=70&products_id=256)

thanks!