:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: marcj on July 18, 2009, 10:53:07 PM

Title: S13 hatch KA24DET budget build
Post by: marcj on July 18, 2009, 10:53:07 PM
picked this up for $400 cash.. a little steep, but they are hard to find in this condition under $1200 around here
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fc1.ac-images.myspacecdn.com%2Fimages02%2F75%2Fl_97979af5842d40198b73086e2229768c.jpg&hash=1acaba982527d95df8a0083e8ae4da250b54fab3)
the hood isn't latched or bolted down for that matter.. it all lines up nice when it is

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fc1.ac-images.myspacecdn.com%2Fimages02%2F107%2Fl_be94da3224974388994774cca733f360.jpg&hash=1c24bcf787e6dec1c91a6bc247c3be4fe53bfcb3)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fc4.ac-images.myspacecdn.com%2Fimages02%2F67%2Fl_c7c8e7b13c424cf186d1442dd38f9ceb.jpg&hash=8691ca1fa1534dc09d1cc2549a940c840fc3c169)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fc1.ac-images.myspacecdn.com%2Fimages02%2F68%2Fl_076880988e1d45fc948a68f569466b0c.jpg&hash=62a23d7f95dff755cb0e64b7fb5a77219c03a1fd)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fc3.ac-images.myspacecdn.com%2Fimages02%2F106%2Fl_9dd97ce4e8b94d8ca27ea36219dc7b1a.jpg&hash=73ab53147cded863f903607183464214418eba37)
in need of a heart transplant

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fc2.ac-images.myspacecdn.com%2Fimages02%2F78%2Fl_0ed5552aed11499d999b445fa68ce95d.jpg&hash=88b42506c19cf4ebd42655103a13aa03728d0878)
picked this up for $90.. guy said it shifts perfectly; he literally had a YARD FULL of 240's and parts, silvias, etc.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fc1.ac-images.myspacecdn.com%2Fimages02%2F73%2Fl_fd4775dee17446cab4f1c39cefcb41e8.jpg&hash=113c2cfe3a6d3ed167fe59e534392844874da21b)
converting it from side feed to top feed..

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fc1.ac-images.myspacecdn.com%2Fimages02%2F102%2Fl_8bf6a8bb5a3a43c6944fed371e8e7d9c.jpg&hash=a0324e5815f33d02ab6f79056fab7852e557ba63)
Mike@LSD made me a clutch capable of 400tq on a budget  :evil:

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fc3.ac-images.myspacecdn.com%2Fimages02%2F1%2Fl_ac83887406354006a404fb461d5773c6.jpg&hash=ad603803786ade76212b54e1a30bac5b26222627)
the snail of choice: Holslut HX-35 12cm^2

for now it's going to be a stock KA24DE boosted around 10psi, tuned on NIStune using a daugherboard/emulator.. hopefully I can get JD out this way, otherwise i'll just pray I don't blow it up  :-\  should be good for 300whp 300tq as a daily driver. 

I'm being really picky about the motor, so I haven't found one yet. Looking for one I can test drive before I buy (harder than you would think). I go to Officer Candidate School in about 10 months, so it has to be done by then, hence no rod/piston build.
Title: Re: S13 hatch KA24DET budget build
Post by: Joseph Davis on July 18, 2009, 11:38:27 PM
ok
Title: Re: S13 hatch KA24DET budget build
Post by: marcj on July 19, 2009, 04:19:55 AM
Mup da doo didda po mo gub dat tum muhfugen bix nood cof bin dub ho muhfugga.
Title: Re: S13 hatch KA24DET budget build
Post by: marcj on July 19, 2009, 07:25:27 PM
EMS of choice.. waiting on some spare funds to get the board I need

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.plmsdevelopments.com%2Fimages_rt%2Fnistune_screen3.jpg&hash=eced685504d4e6dbcc2f12b4cc7357ccfc11a238)
Title: Re: S13 hatch KA24DET budget build
Post by: soontobeDA on July 19, 2009, 07:32:49 PM
yo how much was that clutch?
my spec 3 is the shitzor going out i think
Title: Re: S13 hatch KA24DET budget build
Post by: marcj on July 19, 2009, 07:44:11 PM
is that an eBay clutch? if so, man you should know better than that.. they paint oem replacement and put stage 9 label on it.
Title: Re: S13 hatch KA24DET budget build
Post by: soontobeDA on July 19, 2009, 09:58:12 PM
is that an eBay clutch? if so, man you should know better than that.. they paint oem replacement and put stage 9 label on it.

naw im not that ghettttoo

spec stage 3 6 puck
Title: Re: S13 hatch KA24DET budget build
Post by: Joseph Davis on July 19, 2009, 09:59:40 PM
Spec paints OE replacement pressure plates and calls them Stage 4
Title: Re: S13 hatch KA24DET budget build
Post by: flat_black on July 21, 2009, 03:39:57 AM
I have a KA for sale 68K original miles, still sitting in my 98 240sx automatic... that motor will be coming out soon.. runs perfect

I live in Washington state if by some chance you do