:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: Jordy53 on March 11, 2009, 12:01:09 AM
-
In honor of our new home, I think we should have a Dyno day and after, some Golden Coral..... How about sometime in MAY???? If anyone is interested let me know. I am not sure where we would DYNO but some where near Everett or Marysville or Seattle.
-
theirs no good dynos around like the old days :-\
-
theirs no good dynos around like the old days :-\
horsepower ranch in maple valley is $$$$
-
I know of a Dyno just North of the border.
-
I know of a Dyno just North of the border.
some of aren't allowed in the great white north.
-
I know of a Dyno just North of the border.
some of aren't allowed in the great white north.
Well I guess that fails that idea. Even though it is a really nice facility Leed can vouch for that.
I know Leed normally uses a dynojet around bellingham?
-
i think we need to get the master tuner himself in on this first. so we can work it around his schedule :?:
but im down... need to get my car turboed, then figure out how a slammed teggy is getting on the dyno lol
-
I know of a Dyno just North of the border.
b.d or force fed. if its force fed u can keep ur over priced cock sucking french man
-
I know Leed normally uses a dynojet around bellingham?
Meridian Performance, Lynden WA im pretty sure.... cool guy, should be plenty of parking...
-
Im sure I could get Tommy at Velocity 8 t hook up a deal for his DJ for the day... Cool mellow cat, Justins car has been in his shop a number of times... Dave has been there a number of times, and hes not a nazi... Hell let us run it however the fuck we want
Lynwood
WA
-
I know of a Dyno just North of the border.
b.d or force fed. if its force fed u can keep ur over priced cock sucking french man
Neither, and not Kinetic, and not PDR, and Not Mopac. It does however have a Brand new mustang dyno, a CNC mill, and one of the best fabricators known to man.
-
its a DynoJet 224 though isnt it? not friendly for big hp cars...?
-
Its the same one as Drift office... Low rise too. Justin put down a tick over 500 on it. Well probably end up dyno tuning my pile of shit there too as he said hed give a dirt cheap rate, and its close.... WHo alls going to make more than 700 anyways...
LOL
-
I know of a Dyno just North of the border.
b.d or force fed. if its force fed u can keep ur over priced cock sucking french man
Neither, and not Kinetic, and not PDR, and Not Mopac. It does however have a Brand new mustang dyno, a CNC mill, and one of the best fabricators known to man.
well than. sounds better than a faggot french man. im down i need dynotime
-
Its the same one as Drift office... Low rise too. Justin put down a tick over 500 on it. Well probably end up dyno tuning my pile of shit there too as he said hed give a dirt cheap rate, and its close.... WHo alls going to make more than 700 anyways...
LOL
No one :P
-
http://www.millerperformancecars.com/ (http://www.millerperformancecars.com/) and http://passengerindustries.com/ (http://passengerindustries.com/) Are the ones in the building.
-
place is only like 1/2 a block from my work, so ill probably show up lol... we should have this dyno day on a monday, cuz i can get the day off forsure lol....
-
Im sure I could get Tommy at Velocity 8 t hook up a deal for his DJ for the day... Cool mellow cat, Justins car has been in his shop a number of times... Dave has been there a number of times, and hes not a nazi... Hell let us run it however the fuck we want
Lynwood
WA
x2 on having it at 8Velocity. Tommy's a chill ass dude. Though, I don't think there would be very much parking around there considering all those other businesses around him.
-
Wheres the list so I can put my name on it...... O0
-
Tommy's dyno doesnt have enough fans or high powered fans to keep the intercooler cold like @ drift office
If we want to do this we should do it at drift office. Bob would give us a screaming deal if I go talk to him.
-
my car will be ready
hopefully
I have decided no race gas tune just yet......... unelss my car runs like a fucking top on chevron 94........... I dont want to be like spiker smashing trannys like its going out of style
-
better than 65 an hour???
Watch it Levi or ill sell your tranny 10 times for crack booze and sluts nigger
-
Bob would give us a screaming deal if I go talk to him.
bring your kneepads
-
i should be able to show up, just probably wont have a car to tune depending on how much shit i get together in the next couple months. if i do ill want to go on a shitstampeed.
-
Fuck everyone that has a running motor.
-
I will be there to see some of you nogs, I will try and get the crx done by then.....
Needs intercooler piping fabbed and my front end fitted. Anyone know how to do fiberglass? Mabey a SW Wa mini NW hmt meet to finish my car before dyno?
Couple other SMALL things left to do as well. Wire up boost controller, turbo timer, wastegate vaccume lines etc...
-
Shit, I'm on the east half but am willing to go anywhere were bbq/beer/turbos may be. :yes:
Spiker, you can really get Tommy down to 65 an hour? That's some straight up beaner deal. You must be making Justin suck his cock pretty good. :?:
-
figure it out bitches and ill drag the mini down. itll need some tuning love by then.
dvst8r: you talking about miller performance?
-
i think we need to get the master tuner himself in on this first. so we can work it around his schedule :?:
That sounds like a plan. I will start a list when I get off work. Pm if you intend to come and I will post it on the list.
-
figure it out bitches and ill drag the mini down. itll need some tuning love by then.
dvst8r: you talking about miller performance?
Well that's what I posted the Link too :P
Yeah Dave Cross (owner of Passenger Industries) and I go way back. I can get a straight O0 Deal on that place. Lots of parking, beautiful facility ect...
-
apparently i dont read to well so early in the am
-
This sounds like a good idea... don't let it fall through the cracks.
-
This sounds like a good idea... don't let it fall through the cracks.
I wont let this die. I just need to know where you guys want to do it. Maybe we can hammer down a date so we can make this more oficial. Do you guys want to BBQ or what? Throw the ideas out if there gay someone will tell you :noel:
-
better than 65 an hour???
Watch it Levi or ill sell your tranny 10 times for crack booze and sluts nigger
Yes, since that is his going rate, if i got that it wouldnt be a deal... You gotta remember your just some dude that goes there, I actually helped him put the shop together :-*
-
If hes down lets DO IT!
Ya I think he nailed us like 150 when we dyno tuned my slut there (Thats deals for sure)... Shit how long were we on the dyno for??? 3-4 hours??? (Including the cut hole in floor repalce in tank Walbro operation while on it??? O0 You are black Ross - why I love you :-*)...
LMAO
Im down with the DO thing too It would be more useable info for me too to see how much more power I make since thats where my original dynoing was done.
Either way, Tommys or there, shit I could push my car home from Tommys though... LOL.
-
If hes down lets DO IT!
Ya I think he nailed us like 150 when we dyno tuned my slut there (Thats deals for sure)... Shit how long were we on the dyno for??? 3-4 hours??? (Including the cut hole in floor repalce in tank Walbro operation while on it??? O0 You are black Ross - why I love you :-*)...
LMAO
Im down with the DO thing too It would be more useable info for me too to see how much more power I make since thats where my original dynoing was done.
Either way, Tommys or there, shit I could push my car home from Tommys though... LOL.
I will bring a towdolly and a truck if you want.
-
Bah, I can take care of that myself...
Either option is completely acceptable to me.
-
Lets do it at the end of may. Like the 30th. THat way it should give all of the cheep fuckers time to get it straightened out.
-
I'm in dunno if car will be done but I will be there
-
Lets do it at the end of may. Like the 30th. THat way it should give all of the cheep fuckers time to get it straightened out.
I will be in iraq by then. For my dirty slut to get there, it will have to be at the end of april early early may. Middle of may its sand box time. AGAIN.
-
If I can get a few days off I'm down for this. I'll catch a ride with someone.
-
How many of you fags are gonna magically break something or just not show up like when we tried to have the HMT meet at Pacific this past summer when the Only people who showed up were 1 dirty indian and 1 redneck.
-
How many of you fags are gonna magically break something or just not show up like when we tried to have the HMT meet at Pacific this past summer when the Only people who showed up were 1 dirty indian and 1 redneck.
I wanted to go down with them but had to work :(
-
How about May 9th??????????????? Its a saturday????
-
How about May 9th??????????????? Its a saturday????
2010?
-
How many of you fags are gonna magically break something or just not show up like when we tried to have the HMT meet at Pacific this past summer when the Only people who showed up were 1 dirty indian and 1 redneck.
Hey there were more like 5 people there :P Yes, still weak, but that was old HMT... RHMT turnout should be much stronger.
-
i want to go but i won't go to canada
-
How about May 9th??????????????? Its a saturday????
2010?
May 9th 2009
-
How many of you fags are gonna magically break something or just not show up like when we tried to have the HMT meet at Pacific this past summer when the Only people who showed up were 1 dirty indian and 1 redneck.
Daddy is in. Fo sho. Levi bring your cousin down so I can impregnate her anus
-
if i get my vette done in time i'll be there.
-
i want to go but i won't go to canada
Its in the USA not Canada
-
Bellingham is as far north as Im going.
Auburn is as far south.
-
Bellingham is as far north as Im going.
Auburn is as far south.
Sounds good to me. Someone find a dyno
-
Drift Office or 8Velcoity.
Ross and/or I can get a DEAL,
WHats the issue, besides its more centrall than fucking The border that some of us felonious mother fuckers cant jump over anyways, nor would I want to...
But anyone coming this way, bring some valiums, viagras, and 333s
-
How many of you fags are gonna magically break something or just not show up like when we tried to have the HMT meet at Pacific this past summer when the Only people who showed up were 1 dirty indian and 1 redneck.
I WILL be there if im not in the sand box. Whether my car is done or not, i will make sure to be there.
This is the NEW RHMT, I would like to believe it will be like the old day's where everyone will show up.
-
I will be there selling Urban Indians Heat treated GSR tranny and Head to the lowest bidder, and the next lowest bidder too...
:somb:
-
As long as the date doesn't fall between March 21 through April 23rd I'm game. Will be in FL doing some work.
-
I will be there selling Urban Indians Heat treated GSR tranny and Head to the lowest bidder, and the next lowest bidder too...
:somb:
I need a tranny, il be the third lowest bidder.
-
Okay, maybe ill actually give it to you... Fuck the top bidders, obviously they coild have afforded to get one anyways.... and should have
-
Okay, maybe ill actually give it to you... Fuck the top bidders, obviously they coild have afforded to get one anyways.... and should have. Now I will go fap to noodz of myself.
Just bored :)
-
hook me up with an H trans nigger.
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fcontent.ytmnd.com%2Fcontent%2F6%2Fd%2Ff%2F6dff43e8758a58fd3a70356f658b74b5.gif&hash=54ef3a67beb3dde72847b9762bf2a832418fb1fd)
-
holy shit
-
Okay, maybe ill actually give it to you... Fuck the top bidders, obviously they coild have afforded to get one anyways.... and should have
Deal, getting in the sexpedition as we speak. Be there in two hours.
-
hook me up with an H trans nigger.
That I can do, Yo have monies???
-
How much?
-
How much?
7.5 hookers from Pac Hwy should suffice for negotiation purposes
-
How much?
say 400
-
How about May 9th??????????????? Its a saturday????
Any weekend except the 1st-3rd and the 8th-10th. Ill be in mexico getting shitty drunk bitches!!!!
-
Don't drink the water and unless you know it's good.
-
Does anyone have a location hammered down yet?
-
Need location and date so i can make sure im not flying/working that day...
-
I'm going to speak with bob @ drift office on monday and see what deals I can pull for the end of may.
-
I'm going to speak with bob @ drift office on monday and see what deals I can pull for the end of may.
damn, well i won't be there then. End of may and i will be back in the sand box. Yall better make it good, and take plenty of panty ripper vid so i have something to watch in the sand box!
-
Goddamn a dyno meet needs I need to do some more work.. Havent done shit since the last dyno :?:
-
Anyone know how to do fiberglass?
I do, what exactly are you needing done?
-
Trying to button everything up today minus the DP to exhaust situation.
:noel:
-
Anyone know how to do fiberglass?
I do, what exactly are you needing done?
Just a 2 inch by 2 inch area fiberglassed onto my fender that broke off during shipping...
Trying to button everything up today minus the DP to exhaust situation.
:noel:
Pics or it didn't happen brian.
-
WASHINGTON(God's Country.Where HMT was founded)
1fast68 - Seattle
5thGenlx - Bellevue
70Challenger - Seattle
86crxZ6T - Mount Vernon
88dx - Bellingham
90boostedteg - Bellingham
91' LS-VTEC - Yakima
Abaz - Everett (The Creator)
D112crazy - Yakima
Ba4turbo - Auburn
Beerbongskickass - Longview
Bigdaddyvtec - West Seattle
Blacksi - Everett
Boostforlife - Kent
Buckaroo Banzai - Tacoma
Colt45 - Tacoma
Eghatch95 - Yakima
Fastspec2 - Vancouver
hatchbox90 - Tri Cities
Hatchboy - Battle Ground/Oak Harbor
Hondawagonsts - Spokane (Spocompton)
J. H. Christ - Kirkland
Jacer63 - Graham
jdmhatchracer94 - Graham
Jeffsciv23 - Yakima
Jordy53 - Oak Harbor
Kenny Rogers - Kitsap
Leed - Bellingham (Tuner Extrordinare)
Losesomethinbra - lynwood
Malichite - Port Orchard
Niko360 - Oak Harbor
Perfek360 - Longview
Random Hero - Kent
Ratcityrex - Paulsbo
Runsfromdacops - Federal Way
Ryan89crx - Pasco
Salesmonkey -
ScorpioMK - Lynwood
TurboHF - Everett
VadimkaG - Auburn
Check the fuck in for the meet/
-
Do we have a date locked down yet?
-
I'm trying to take care of that tomorrow after work.
I can do fiberglass anything. Thats what I do everyday.
-
I'm trying to take care of that tomorrow after work.
Right on, Hope it works out and everyone showes up.
BTW, Did you get a payment from your insurance company for you shop yet? Hope you get a check that will cover your loss.
-
I'm trying to take care of that tomorrow after work.
I can do fiberglass anything. Thats what I do everyday.
then help me out ya fucker.
-
I'm trying to take care of that tomorrow after work.
Right on, Hope it works out and everyone showes up.
BTW, Did you get a payment from your insurance company for you shop yet? Hope you get a check that will cover your loss.
Got a check for the shop only, and it was about 25k under what its going to cost to rebuild it (maxed out the coverage)
They told us to get all the snap on bills and tool bills together and pictures of the trashed ones and mark down everything.
Including toolbox's its 38600 so far, and we have yet to sift through all the tools.. Our business insurance told us to not touch anything else after we got a lawyer involved, they weren't trying to cover anything.
-
Man that sucks. Dealing with insurance companys and lawyers sucks. My dad is still going through fighting with the two of them over a clame thats 1 1/2 years old. :-X
-
Front end back on.
Redid the fuel return from the rail to the regulator.
Bosch 044 installed, wired and plumbed.
Noggle wired to ECU for high boost goodness.
Boost solenoid wired.
Tranny filled.
New plug installed for ect sensor.
Chargepiping all done (just left it like it was Josh, I liked how it looked to... I figured out a way to get the air ratchet on the top clamp easy).
Front suspension tightened up (New lower ball joint)
Wheels back on
Just need to get the feed lline done (I need to get the back end in the air too and dont have 2 more jackstands- Just need to trim the line to length, install the tank AN fitting, clean it and final tighten), then drive the car to Marcus' for the final DP to exhaust fab. I have the 4" flex, and 4" Vbands...
You ready nig???
O0
\
Lets do this.
Drift office sounds good.
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff4%2Fbigdaddyvtec%2FJap%2520Slut%2FNew%2520hotness%2FIMG_1721.jpg&hash=90ef4c59da1eb14584489576558f58f6ada37252)
Got any better pics of this crazy ass manifold? That shit is looking good. O0
-
Looks better and you saved time :-*
-
yessir
-
Damn, drift office does sound good.
20minutes for me to walk there, or 5 minute drive on a car.
Hopefully my del sol will be painted and sold by then, and the ZC Crx will get boosted.
I'm down and will come to at least watch if a turbo car won't be in my possesion at that time. My brother will be down if he finishes his beastly integra by then.
-
So, could we nail down a date and get an address?
-
Brian, I am not afraid to admit when i am jealous. You are a bitch.
I wish i had the time and resources to work on my pile of shit up here where i live, instead of once every two months 4 hours south... Ughhh..
None the less, you shit looks great and im sure there are many more trashed tranny's in it's future.
-
This car is such a pain in the ass that some times I cant even look at it.
I just hope this year it actually lets me enjoy it instead of not wanting to touch it. I dont wish the fucking troubles i go through with this pile of shit on anyone, but theres not another car Id want to own... Im a masochist like that.... Its like a really hot shitty slutty girlfriend....
It could have never happened without this site (Or a number of my friends on this site), one of the reasons Im so glad that the true sprit of the REAL HMT is alive and well...
Ill be at the dyno meet.
-
This car is such a pain in the ass that some times I cant even look at it.
I just hope this year it actually lets me enjoy it instead of not wanting to touch it. I dont wish the fucking troubles i go through with this pile of shit on anyone, but theres not another car Id want to own... Im a masochist like that.... Its like a really hot shitty slutty girlfriend....
It could have never happened without this site (Or a number of my friends on this site), one of the reasons Im so glad that the true sprit of the REAL HMT is alive and well...
Ill be at the dyno meet.
If the meet ends up happening at the end of may, we should have a mini get together at the very end end of this month or early april. My daughter is due around that time so hopefully thatw on't spoil any fun, but i really have to get my pos going.
Have to do some wiring and fab intercooler piping and drop tank and instal fuel pump, then should be ready to go...
You down for driving 2 hours south to hang out and get shit done?
-
This car is such a pain in the ass that some times I cant even look at it.
I just hope this year it actually lets me enjoy it instead of not wanting to touch it. I dont wish the fucking troubles i go through with this pile of shit on anyone, but theres not another car Id want to own... Im a masochist like that.... Its like a really hot shitty slutty girlfriend....
It could have never happened without this site (Or a number of my friends on this site), one of the reasons Im so glad that the true sprit of the REAL HMT is alive and well...
Ill be at the dyno meet.
If the meet ends up happening at the end of may, we should have a mini get together at the very end end of this month or early april. My daughter is due around that time so hopefully thatw on't spoil any fun, but i really have to get my pos going.
Have to do some wiring and fab intercooler piping and drop tank and instal fuel pump, then should be ready to go...
You down for driving 2 hours south to hang out and get shit done?
Where do you live at?
Centralia/Olympia area?
-
I am going to be there with my hot dirty fucking Holset slut
if its near the end of may that is
:noel: :noel: :noel:
:yes:Rachel will most likely be down for all this aswell :yes:
:-\ because 88dx seems to have this big hardon for seeing her :?:
-
i got the rest of your shit from dustin... get this b series shit away from me.... lol
-
i got the rest of your shit from dustin... get this b series shit away from me.... lol
pm'd you with address
Plus
Answer my txt msg's or I will have to spam phone you
-
If you guys wanted we could go to Marysville Speed and Customs (aka little monsters) they are a block away from me and beaus house.
I really want to see beaus car on the dyno, we took it for a ripper yesterday... very nice.
-
Im down for wherever... Hopefully if all goes well, should have the 700 before then... What kind of Dyno is it Jeff?
NM... DJ huh???
i got the rest of your shit from dustin... get this b series shit away from me.... lol
pm'd you with address
Got it. Ill pack it up tonight... Get it out by Wednesday
-
How many of you fags are gonna magically break something or just not show up like when we tried to have the HMT meet at Pacific this past summer when the Only people who showed up were 1 dirty indian and 1 redneck.
the only two hmt members i saw were the dirty indian working on his purple mobile and ratcityrex. but both me and my friend was there and supposibly there were lots of others that showed up. i said hey to them and then took off haha. that track was a bust that day
that failed because of poor planning. there was none. ill be showing up as long as i dont get ran over by a semi or something strange
-
I was over there but was kind of new to HMT and didn't know who was who.
VadimkaG was there as well.
-
How many of you fags are gonna magically break something or just not show up like when we tried to have the HMT meet at Pacific this past summer when the Only people who showed up were 1 dirty indian and 1 redneck.
the only two hmt members i saw were the dirty indian working on his purple mobile and ratcityrex. but both me and my friend was there and supposibly there were lots of others that showed up. i said hey to them and then took off haha. that track was a bust that day
that failed because of poor planning. there was none. ill be showing up as long as i dont get ran over by a semi or something strange
I was there in the POS Del Suck. Talked to the indian and the redneck for a while. I was right next to the guy with the blazer that backed into the neon full throttle in the pits :somb:
-
<-----redneck, I don't recall speaking to you ......
-
Doh, different redneck. :) There was a bunch of us there then. jdmhatchracer is the guy I was talking about
-
wow ass I may live on the woods but no redneck.
yeah I was there with the coupe
-
If you guys wanted we could go to Marysville Speed and Customs (aka little monsters) they are a block away from me and beaus house.
I really want to see beaus car on the dyno, we took it for a ripper yesterday... very nice.
Marysville is good. Jeff How much will this cost to rent out?
-
loosesomethinbra was there also. gues everyones paths just didn't cross.
-
if leeann pops before the date i'll go.
what is the date... is it set?
-
If you guys wanted we could go to Marysville Speed and Customs (aka little monsters) they are a block away from me and beaus house.
I really want to see beaus car on the dyno, we took it for a ripper yesterday... very nice.
is this behind a workout place?
-
when and where the hell is this place
-
Let Ross talk to Bob at DO too...
I mean shit lets see what kind of price we can get between him, Tommy, and your northend boys...
We need a date and a list.
Im in.
Wherever/whenever (Im going to Northern Califas (CHICO, hii Chris) first weekend of June though))... Ill bring the slut with 10 gallons of 114 in her gut.
-
I'm in also, whenever wherever excpet may10-16th
-
How many of you fags are gonna magically break something or just not show up like when we tried to have the HMT meet at Pacific this past summer when the Only people who showed up were 1 dirty indian and 1 redneck.
the only two hmt members i saw were the dirty indian working on his purple mobile and ratcityrex. but both me and my friend was there and supposibly there were lots of others that showed up. i said hey to them and then took off haha. that track was a bust that day
that failed because of poor planning. there was none. ill be showing up as long as i dont get ran over by a semi or something strange
I was there in the POS Del Suck. Talked to the indian and the redneck for a while. I was right next to the guy with the blazer that backed into the neon full throttle in the pits :somb:
haha fuck i missed that, ya me and my buddy searched around for a bit when we first got there looking for some hmt cars. and didnt fine shit besides a few maybes with no one around. i think the end of may would work out great. memorial weekend might be a good time to do it sense most of everyone would have a nice long weekend off.
-
This car is such a pain in the ass that some times I cant even look at it.
I just hope this year it actually lets me enjoy it instead of not wanting to touch it. I dont wish the fucking troubles i go through with this pile of shit on anyone, but theres not another car Id want to own... Im a masochist like that.... Its like a really hot shitty slutty girlfriend....
It could have never happened without this site (Or a number of my friends on this site), one of the reasons Im so glad that the true sprit of the REAL HMT is alive and well...
Ill be at the dyno meet.
If the meet ends up happening at the end of may, we should have a mini get together at the very end end of this month or early april. My daughter is due around that time so hopefully thatw on't spoil any fun, but i really have to get my pos going.
Have to do some wiring and fab intercooler piping and drop tank and instal fuel pump, then should be ready to go...
You down for driving 2 hours south to hang out and get shit done?
Where do you live at?
Centralia/Olympia area?
All my car stuff and my car is at my parents house in Battle Ground,Wa. It is an hour south of olympia. Exit 14
-
i got the rest of your shit from dustin... get this b series shit away from me.... lol
I want some b series shit, what you got.
-
How does april 25th sound? I had to come up with a date. But i'm trying to work with everyone..
-
If you guys wanted we could go to Marysville Speed and Customs (aka little monsters) they are a block away from me and beaus house.
I really want to see beaus car on the dyno, we took it for a ripper yesterday... very nice.
I am down with marysville, i will have to trailer my car up though, and tune it on the dyno if we have time (as long as it is before the middle of may).
I need a basemap burned for me.. leeeeeeeeeeeeeeed!
(cues crx lit over city picture)
-
How does april 25th sound? I had to come up with a date. But i'm trying to work with everyone..
Im down! I will have to clear that with work... But im kind of a big deal, so if i ask for something off, i get it off.
-
Bah, marysville is soooo far north :-P
Does little monsters have a 4wd dyno?
I know we have a couple subaru nuts here.
-
Bah, marysville is soooo far north :-P
Does little monsters have a 4wd dyno?
I know we have a couple subaru nuts here.
One of them is from Portland rite? did he ever make it over here? red devil or some shit rite?
-
How many of you fags are gonna magically break something or just not show up like when we tried to have the HMT meet at Pacific this past summer when the Only people who showed up were 1 dirty indian and 1 redneck.
the only two hmt members i saw were the dirty indian working on his purple mobile and ratcityrex. but both me and my friend was there and supposibly there were lots of others that showed up. i said hey to them and then took off haha. that track was a bust that day
that failed because of poor planning. there was none. ill be showing up as long as i dont get ran over by a semi or something strange
I was there in the POS Del Suck. Talked to the indian and the redneck for a while. I was right next to the guy with the blazer that backed into the neon full throttle in the pits :somb:
haha fuck i missed that, ya me and my buddy searched around for a bit when we first got there looking for some hmt cars. and didnt fine shit besides a few maybes with no one around. i think the end of may would work out great. memorial weekend might be a good time to do it sense most of everyone would have a nice long weekend off.
meh i was there, working on UIs ride prior to 11.75 goodness.
I'm in for a WA dyno day. My car will need tuned by then. Will rock BBKA on vitaras till then.
-
Im in. May sounds good. Sat or Sun is probably the best day of the week I assume?
-
Im in. May sounds good. Sat or Sun is probably the best day of the week I assume?
Saturday!!! :yes: Do you have any recomendations for a place to dyno?
-
See, we are not set on a date. someone start a new thread with a vote for a date and then we will go from there.
-
Can a mod add a poll to this thread?
-
See, we are not set on a date. someone start a new thread with a vote for a date and then we will go from there.
Can a mod add a poll to this thread?
POLL ADDED Now Vote Bitches
-
SHould make it so you can change your vote so that we can see how many people can agree on a date after seeing what others think... It will make it alot easier.
Im voting, but just to see whats been voting on so far... It would be nice to be able to change it as Im open....
-
SHould make it so you can change your vote so that we can see how many people can agree on a date after seeing what others think... It will make it alot easier.
Im voting, but just to see whats been voting on so far... It would be nice to be able to change it as Im open....
I dont know how to do that....
-
I voted the 9th cause its the only day we don't have local racing events.
-
ok lets hurry up and get this set so i can rent the dyno for the day
-
Were are you renting the dyno from ? How much is it?
-
EARLIER in May, even late April.... pleasekthx...
ok lets hurry up and get this set so i can rent the dyno for the day
We havent even decided on where yet......
So WHERE are we doing this???? Marrysville, Lynnhood or Auburn???
I think price should be the factor, All three are Dynojets.... Ill find out how much from Tommy, but DO would work out too.... In fact Id rather go to DO as my numbers will mean more.
IDK or Care, what do you nogs think?
How long do we need the dyno for???
Jeff can you check into the Marysville spot, Josh can ask bob... And ill ping ChingChong.......
-
Let's have another poll for dyno location as well, unless one is cheaper than another.
I vote auburn.
-
Okay:
Tommy will give us the Dyno from 10-6 for 500 bux, and hes willing to deal below that, he asked what I THOUGHT was fair... LOL.... Obviously it would be less if we dont need it that long.
But it has to be a Saturday.
DynoJet
-
Okay:
Tommy will give us the Dyno from 10-6 for 500 bux, and hes willing to deal below that, he asked what I THOUGHT was fair... LOL.... Obviously it would be less if we dont need it that long.
But it has to be a Saturday.
DynoJet
$50/hour, so if we can get 16 cars, assuming everyone is just making pulls and not tuning, $25 a person. Damn cheap. Not sure about dynoing the N/A dart, 4600rpm converters and dynos don't get along. Maybe bring the turbo car down though.
-
its whatever, im trying to get on a dyno i know what alot of cars have, and sin.ce drift offices dyno is new it still has badass rollers 4 traction. dunno if any of you guys have had to worry about that tho.
no marysville, more people live down this way.
ive got 7 cars that are set in stone to go whenever.
im trying to get 10:30 - 8
and with me running it we should be way under 500.
just food for thought
-
Find out nig... Im down for wherever... 500 was for the WHOLE day, obviously its cheaper if we dont run that long...
My nephew will be in town from California at the end of May (22nd) so will the queen of carrot cake son, hed dig it. Shit Im going to have the mom make 10 carrot cakes and slang that shit by the slice... LOL
If people are going to worry about going to Auburn, Tommys is an option... Id rather not go to Marrysville myself, but would. Shit its actually probably closer to my place anyways (actually I kknow it is),,,
BUt Id rather go to Bobs
-
saturday sucks, but i might be able to get the day off...
-
spiker, tommy's shop is a bit crowded for an hmt meet dont you think? bobs new one is 5 bays +
-
Im down any way we go...
Whatever everyone votes for, hell im in even if I gots to goto Marystwat.
Id rather be closer to home than Auburn though.
But ya if Tommy has a bunch of cars in his shop it would be tight, if not (I went there today and he had 1 car in the shop-im sure hed roll them out for us...) Theres absolutely no difference IMO. Unless Bob has 2 dynos now... LOL. IM not going to make a shitstink about it.... WHatever everyone wants to do is fine with me... HAve you got a quote from him yet???
Sooo is it about money, or whats our priority as far as location?
Lets fucking vote already and get thios done.
Wish we were doing it closer to the beginiing of the month though... Or even the week before the 30th, fuck thats a holiday weekend...
-
Wish we were doing it closer to the beginiing of the month though... Or even the week before the 30th, fuck thats a holiday weekend...
So do i. Like in the first week of may, or last week of april. I would be able to go and bring the rex and try and squeeze 500 out of that turbo. If it is mid or after may i will be on deployment again..
-
Updates? May 30th or not?
-
im in.. i need some tuning....been needing it for over a year now... lol :somb:
-
ill be there possibly take leave but yall need to settle on something since the military gets annoyned with changing paperwork lol
also lets make it a whole day so we can get some tunning shit all those brains and expertise with no tunning would be gay.
fuck make it closer to montana :P
we need to redo the poll i voted 31st but really a friday to sunday meet would be even better!!
1 hanging out day
1 tunning day
1 racing day
-
Up for some orginization ans specifics... Ok, whatever date, Josh, you get ahold of Bob???? Lets get her done...
Illl hopefully have had a chance to get with Dave for the big boost tune by then....
-
naa, I'll go over tomorrow and set it up for the 30th since thats the vote.
-
where @
-
who the fuck are you noob.
-
who the fuck are you noob.
martirw on ohmt & d series
-
8)
-
Im going to be a little late
-
Im going to be a little late
+1
-
I thought it was Sunday? I waited around for two hours and then said fuck it and went to Panda Express.