Topic: RHMT DYNO MEET WA NOW WITH POLL DATE (Read 21354 times)

Jordy53 · « **on:** March 11, 2009, 12:01:09 AM »

In honor of our new home, I think we should have a Dyno day and after, some Golden Coral..... How about sometime in MAY?

If anyone is interested let me know. I am not sure where we would DYNO but some where near Everett or Marysville or Seattle.

88dx · « **Reply #1 on:** March 11, 2009, 12:20:24 AM »

theirs no good dynos around like the old days $:-\$

j.h.christ · « **Reply #2 on:** March 11, 2009, 12:22:33 AM »

Quote from: 88dx on March 11, 2009, 12:20:24 AM

theirs no good dynos around like the old days $:-\$

horsepower ranch in maple valley is $$$$

dvst8r · « **Reply #3 on:** March 11, 2009, 12:23:10 AM »

I know of a Dyno just North of the border.

j.h.christ · « **Reply #4 on:** March 11, 2009, 12:31:10 AM »

Quote from: dvst8r on March 11, 2009, 12:23:10 AM

I know of a Dyno just North of the border.

some of aren't allowed in the great white north.

dvst8r · « **Reply #5 on:** March 11, 2009, 12:38:27 AM »

Quote from: j.h.christ on March 11, 2009, 12:31:10 AM

Quote from: dvst8r on March 11, 2009, 12:23:10 AM
I know of a Dyno just North of the border.

some of aren't allowed in the great white north.

Well I guess that fails that idea. Even though it is a really nice facility Leed can vouch for that.

I know Leed normally uses a dynojet around bellingham?

turbohf · « **Reply #6 on:** March 11, 2009, 12:42:38 AM »

i think we need to get the master tuner himself in on this first. so we can work it around his schedule

but im down... need to get my car turboed, then figure out how a slammed teggy is getting on the dyno lol

RobC · « **Reply #7 on:** March 11, 2009, 12:43:51 AM »

Quote from: dvst8r on March 11, 2009, 12:23:10 AM

I know of a Dyno just North of the border.

b.d or force fed. if its force fed u can keep ur over priced cock sucking french man

turbohf · « **Reply #8 on:** March 11, 2009, 12:44:46 AM »

Quote from: dvst8r on March 11, 2009, 12:38:27 AM

I know Leed normally uses a dynojet around bellingham?

Meridian Performance, Lynden WA im pretty sure.... cool guy, should be plenty of parking...

bigdaddyvtec · « **Reply #9 on:** March 11, 2009, 12:47:02 AM »

Im sure I could get Tommy at Velocity 8 t hook up a deal for his DJ for the day... Cool mellow cat, Justins car has been in his shop a number of times... Dave has been there a number of times, and hes not a nazi... Hell let us run it however the fuck we want

Lynwood

WA

dvst8r · « **Reply #10 on:** March 11, 2009, 12:49:44 AM »

Quote from: RobC on March 11, 2009, 12:43:51 AM

Quote from: dvst8r on March 11, 2009, 12:23:10 AM
I know of a Dyno just North of the border.

b.d or force fed. if its force fed u can keep ur over priced cock sucking french man

Neither, and not Kinetic, and not PDR, and Not Mopac. It does however have a Brand new mustang dyno, a CNC mill, and one of the best fabricators known to man.

turbohf · « **Reply #11 on:** March 11, 2009, 12:50:04 AM »

its a DynoJet 224 though isnt it? not friendly for big hp cars...?

bigdaddyvtec · « **Reply #12 on:** March 11, 2009, 12:52:04 AM »

Its the same one as Drift office... Low rise too. Justin put down a tick over 500 on it. Well probably end up dyno tuning my pile of shit there too as he said hed give a dirt cheap rate, and its close.... WHo alls going to make more than 700 anyways...

LOL

RobC · « **Reply #13 on:** March 11, 2009, 12:54:36 AM »

Quote from: dvst8r on March 11, 2009, 12:49:44 AM

Quote from: RobC on March 11, 2009, 12:43:51 AM
Quote from: dvst8r on March 11, 2009, 12:23:10 AM
I know of a Dyno just North of the border.

b.d or force fed. if its force fed u can keep ur over priced cock sucking french man

Neither, and not Kinetic, and not PDR, and Not Mopac. It does however have a Brand new mustang dyno, a CNC mill, and one of the best fabricators known to man.

well than. sounds better than a faggot french man. im down i need dynotime

88dx · « **Reply #14 on:** March 11, 2009, 12:57:23 AM »

Quote from: bigdaddyvtec on March 11, 2009, 12:52:04 AM

Its the same one as Drift office... Low rise too. Justin put down a tick over 500 on it. Well probably end up dyno tuning my pile of shit there too as he said hed give a dirt cheap rate, and its close.... WHo alls going to make more than 700 anyways...

LOL

No one

dvst8r · « **Reply #15 on:** March 11, 2009, 12:58:29 AM »

http://www.millerperformancecars.com/ and http://passengerindustries.com/ Are the ones in the building.

turbohf · « **Reply #16 on:** March 11, 2009, 01:06:45 AM »

place is only like 1/2 a block from my work, so ill probably show up lol... we should have this dyno day on a monday, cuz i can get the day off forsure lol....

d112crzy · « **Reply #17 on:** March 11, 2009, 01:33:41 AM »

Quote from: bigdaddyvtec on March 11, 2009, 12:47:02 AM

Im sure I could get Tommy at Velocity 8 t hook up a deal for his DJ for the day... Cool mellow cat, Justins car has been in his shop a number of times... Dave has been there a number of times, and hes not a nazi... Hell let us run it however the fuck we want

Lynwood

WA

x2 on having it at 8Velocity. Tommy's a chill ass dude. Though, I don't think there would be very much parking around there considering all those other businesses around him.

ratcityrex · « **Reply #18 on:** March 11, 2009, 01:55:47 AM »

Wheres the list so I can put my name on it......

Random Hero · « **Reply #19 on:** March 11, 2009, 02:04:26 AM »

Tommy's dyno doesnt have enough fans or high powered fans to keep the intercooler cold like @ drift office

If we want to do this we should do it at drift office. Bob would give us a screaming deal if I go talk to him.

Urban Indian · « **Reply #20 on:** March 11, 2009, 02:06:54 AM »

my car will be ready

hopefully

I have decided no race gas tune just yet......... unelss my car runs like a fucking top on chevron 94........... I dont want to be like spiker smashing trannys like its going out of style

bigdaddyvtec · « **Reply #21 on:** March 11, 2009, 02:08:02 AM »

better than 65 an hour???

Watch it Levi or ill sell your tranny 10 times for crack booze and sluts nigger

j.h.christ · « **Reply #22 on:** March 11, 2009, 02:24:36 AM »

Quote from: Random Hero on March 11, 2009, 02:04:26 AM

Bob would give us a screaming deal if I go talk to him.

bring your kneepads

salesmonkey · « **Reply #23 on:** March 11, 2009, 02:46:52 AM »

i should be able to show up, just probably wont have a car to tune depending on how much shit i get together in the next couple months. if i do ill want to go on a shitstampeed.

widebody93 · « **Reply #24 on:** March 11, 2009, 02:47:10 AM »

Fuck everyone that has a running motor.

hatchboy · « **Reply #25 on:** March 11, 2009, 02:54:41 AM »

I will be there to see some of you nogs, I will try and get the crx done by then.....

Needs intercooler piping fabbed and my front end fitted. Anyone know how to do fiberglass? Mabey a SW Wa mini NW hmt meet to finish my car before dyno?
Couple other SMALL things left to do as well. Wire up boost controller, turbo timer, wastegate vaccume lines etc...

d112crzy · « **Reply #26 on:** March 11, 2009, 03:20:10 AM »

Shit, I'm on the east half but am willing to go anywhere were bbq/beer/turbos may be. :yes:

Spiker, you can really get Tommy down to 65 an hour? That's some straight up beaner deal. You must be making Justin suck his cock pretty good.

Super Dipper · « **Reply #27 on:** March 11, 2009, 06:57:31 AM »

figure it out bitches and ill drag the mini down. itll need some tuning love by then.

dvst8r: you talking about miller performance?

Jordy53 · « **Reply #28 on:** March 11, 2009, 09:26:58 AM »

Quote from: turbohf on March 11, 2009, 12:42:38 AM

i think we need to get the master tuner himself in on this first. so we can work it around his schedule

That sounds like a plan. I will start a list when I get off work. Pm if you intend to come and I will post it on the list.

dvst8r · « **Reply #29 on:** March 11, 2009, 11:00:30 AM »

Quote from: Super Dipper on March 11, 2009, 06:57:31 AM

figure it out bitches and ill drag the mini down. itll need some tuning love by then.

dvst8r: you talking about miller performance?

Well that's what I posted the Link too

Yeah Dave Cross (owner of Passenger Industries) and I go way back. I can get a straight

Deal on that place. Lots of parking, beautiful facility ect...

News:

Poll

What date should the dyno day be

Author Topic: RHMT DYNO MEET WA NOW WITH POLL DATE (Read 21354 times)