:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: walter on September 19, 2009, 12:15:00 PM

Title: start up, not idle ..
Post by: walter on September 19, 2009, 12:15:00 PM
well today i tried to start up my SOHC ZC (A6) engine, injectors 460cc, everything is stock.

i just made a basemap using NG62 final map , sometimes engine idles roughly , i was checking for  leaks, only found one in sandwich for oil gauge.. but that's not the problem i think, i checked one spark plug and was black, i think it's soo rich.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg245.imageshack.us%2Fimg245%2F1104%2Fdscf6519.jpg&hash=f2fd49ef10f4884f1694db3a90cb296064acd690)

i can't upload my map here, im using PR4 chipped ecu

im uploading a video of how start it.
Title: Re: start up, not idle ..
Post by: walter on September 19, 2009, 12:36:23 PM
btw, not CEL.
Title: Re: start up, not idle ..
Post by: walter on September 19, 2009, 12:46:13 PM
video.

SOHC ZC Turbo... (http://www.youtube.com/watch?v=quv8sRSx1pw#normal)
Title: Re: start up, not idle ..
Post by: walter on September 19, 2009, 01:11:17 PM
yes, i did, cam mark is fine and crank mark is off just but like 1mm maybe.. anyway i think that shuold runs better even..
Title: Re: start up, not idle ..
Post by: walter on September 19, 2009, 01:13:33 PM
btw, another weird thing is rpm sometimes doesnt works in the cluster.....engine has +125K miles.
Title: Re: start up, not idle ..
Post by: walter on September 19, 2009, 02:40:40 PM
Ok, tried with stock map and stock injectores and start up and idles very good, ill try to upload my map ..
Title: Re: start up, not idle ..
Post by: PhilStubbs on September 19, 2009, 05:05:22 PM
PM me your email address and i will send you a good basemap i have. should run ok. it was made for 440's, but i can lean it a touch
Title: Re: start up, not idle ..
Post by: speedjunky01 on September 19, 2009, 07:54:08 PM
Quote from: walter on September 19, 2009, 01:11:17 PM
yes, i did, cam mark is fine and crank mark is off just but like 1mm maybe.. anyway i think that shuold runs better even..


have you checked using the oil pump mark? Ive had the crank pulley be off a tad
Title: Re: start up, not idle ..
Post by: walter on September 20, 2009, 06:15:36 AM
Quote from: speedjunky01 on September 19, 2009, 07:54:08 PM
Quote from: walter on September 19, 2009, 01:11:17 PM
yes, i did, cam mark is fine and crank mark is off just but like 1mm maybe.. anyway i think that shuold runs better even..


have you checked using the oil pump mark? Ive had the crank pulley be off a tad

yes, of course.

SecksyPeePee, PM sent!
Title: Re: start up, not idle ..
Post by: ApexSilver06MR on September 20, 2009, 04:20:08 PM
post you bin here
Title: Re: start up, not idle ..
Post by: walter on September 20, 2009, 07:00:52 PM
fuel map

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg268.imageshack.us%2Fimg268%2F710%2Fgenamap.jpg&hash=f54f8cd2f6353821fa5d533b222a18de9608c78c)

timing

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg62.imageshack.us%2Fimg62%2F9536%2Fgenamap1.jpg&hash=790a05dd5b450cbf009ccc62c7b4f28a4073b626)
Title: Re: start up, not idle ..
Post by: walter on September 21, 2009, 02:34:41 PM
nobody?   :-\
Title: Re: start up, not idle ..
Post by: walter on September 21, 2009, 06:39:34 PM
i was doing somethings wrong, ill try another map i did tomorrow.  :noel:
Title: Re: start up, not idle ..
Post by: hotrex on September 21, 2009, 06:55:31 PM
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.brokenoff.com%2Fanus1e.jpg&hash=a8d049c67f83b12f87e5d83789c93c92682566ca)
Title: Re: start up, not idle ..
Post by: walter on September 22, 2009, 06:28:14 PM
u sucks  :noel: