:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: Kain on October 14, 2009, 02:22:27 PM
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fphotos-e.ak.fbcdn.net%2Fhphotos-ak-snc1%2Fhs220.snc1%2F8734_556636903732_71100752_32771551_3948720_n.jpg&hash=e8ca6535c213350614f966279023a90ac8d64751)
-
Judging this book by its cover, and the car on the cover, id say it contains little to no technical information.
-
Aaron Cake would dissapprove. How do you incorporate more reliability into an already bulletproof design?
-
aaron cake is mentioned in this book in the special thanks section.
however the deepest gratitude goes to jim downing, paul yaw, and rotary god.
hm...
our engines can be very reliable if you know what your doing. you cant muscle fuck it like hotrex and expect it to live.
-
An engine that can't be muscle fucked is hardly an engine at all.
sigh.
-
Sir, reliable is a butt fucked 20+ year old mustang 5.0 with twin t-bird 60trims and an fmu that refuses to die.
Try this with a rotary, then get back to me on this whole "reliable" bit.
-
Reliable is a product of over engineering. It takes place on the drawing board and the factory production line, and can't be added in after the fact in a 90% stock part rebuild.
-
Sir, reliable is a butt fucked 20+ year old mustang 5.0 with twin t-bird 60trims and an fmu that refuses to die.
Try this with a rotary, then get back to me on this whole "reliable" bit.
obviously you have yet to see the 12a turbos. 30 years old, worn housings, turbo making 600 hp.
-
Sir, reliable is a butt fucked 20+ year old mustang 5.0 with twin t-bird 60trims and an fmu that refuses to die.
Try this with a rotary, then get back to me on this whole "reliable" bit.
obviously you have yet to see the 12a turbos. 30 years old, worn housings, turbo making 600 hp.
How many quarts of oil per mile?
:P
-
Sir, reliable is a butt fucked 20+ year old mustang 5.0 with twin t-bird 60trims and an fmu that refuses to die.
Try this with a rotary, then get back to me on this whole "reliable" bit.
obviously you have yet to see the 12a turbos. 30 years old, worn housings, turbo making 600 hp.
And it was running race gas.
Sir, a geo metro could make 600hp running race gas. This proves nothing.
-
Sir, reliable is a butt fucked 20+ year old mustang 5.0 with twin t-bird 60trims and an fmu that refuses to die.
Try this with a rotary, then get back to me on this whole "reliable" bit.
obviously you have yet to see the 12a turbos. 30 years old, worn housings, turbo making 600 hp.
How many quarts of oil per mile?
:P
what do you mean? 12A's have 3,, apex seals that aren as long as the 13b apex seals wich are like... 2mm. they ocmpleatly wear off all the wear surfaces and shit and still run great. mazda didnt even deem it necessary to make rotor housings for them any more since they re soo hard to blow the fuck up.
-
what do you mean? 12A's have 3,, apex seals that aren as long as the 13b apex seals wich are like... 2mm. they ocmpleatly wear off all the wear surfaces and shit and still run great. mazda didnt even deem it necessary to make rotor housings for them any more since they re soo hard to blow the fuck up.
Pretty sure they are longer than 2 mm, but I bet they aren't any wider than 2mm.
:P
Just trying to get your panties in a bunch.
-
what do you mean? 12A's have 3,, apex seals that aren as long as the 13b apex seals wich are like... 2mm. they ocmpleatly wear off all the wear surfaces and shit and still run great. mazda didnt even deem it necessary to make rotor housings for them any more since they re soo hard to blow the fuck up.
Pretty sure they are longer than 2 mm, but I bet they aren't any wider than 2mm.
:P
Just trying to get your panties in a bunch.
12a apex seals are shorter and wider than most 13b's.
-
looks like great toilet reading... I mean paper... Glosssy pages take some finesse though to get the ole pooper clean.... but I can think of nothing better than to wipe my ass with than a publication dedicated to the wankel engine and its glory in FAIL...
Can you smell the premix.....
-
Sir, reliable is a butt fucked 20+ year old mustang 5.0 with twin t-bird 60trims and an fmu that refuses to die.
Try this with a rotary, then get back to me on this whole "reliable" bit.
You seem to have a Rustang Fetish here lately.
-
He drools over the blower car I've been driving. He misses his old one.
-
Sir, reliable is a butt fucked 20+ year old mustang 5.0 with twin t-bird 60trims and an fmu that refuses to die.
Try this with a rotary, then get back to me on this whole "reliable" bit.
You seem to have a Rustang Fetish here lately.
He drools over the blower car I've been driving. He misses his old one.
Yes, I miss my 98 GT, and my 89 trunk car. The good thing is, the wife loves mustangs, so it wont be hard to justify buying another.
-
This one is a 98 GT, under the sheeps skin. I just put a set of plug wires on it, and took it out to turn some doughnuts in the rain.
-
i've had bad experiences with fords...
-
I miss my rotary. In due time, I will own another. They arent for the weak at heart.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ffarm4.static.flickr.com%2F3432%2F3218155573_20955767a4_o.jpg&hash=4a8662e436a6b6e126a28382d0fdb8b1aef84eb7)
-
I miss my rotary. In due time, I will own another. They arent for the weak at heart.
Or the light of wallet. Or the people who need to get somewhere, no questions asked.
-
i've had bad experiences with fords...
id say
-
I miss my rotary. In due time, I will own another. They arent for the weak at heart.
Or the light of wallet. Or the people who need to get somewhere, no questions asked.
ha ha ha. so tru.
-
I miss my rotary. In due time, I will own another. They arent for the weak at heart.
Or the light of wallet. Or the people who need to get somewhere, no questions asked.
ha ha ha. so tru.
Peter, I wish you the sort of rotory reliability that only exists in Aaron Cake's fantasyland. You are a good person who deserves it. Whenever you drive your RX7 god almight should part the clouds and shine sunlight down on you while angels sing and shit.
-
You are all smoking crack rx7's dont break, ever. Just look on my website, that will prove everything.
www.aaroncake.net (http://)
-
I miss my rotary. In due time, I will own another. They arent for the weak at heart.
Or the light of wallet. Or the people who need to get somewhere, no questions asked.
ha ha ha. so tru.
Peter, I wish you the sort of rotory reliability that only exists in Aaron Cake's fantasyland. You are a good person who deserves it. Whenever you drive your RX7 god almight should part the clouds and shine sunlight down on you while angels sing and shit.
Joey, I really wish you weren't so close minded about rotaries. I myself ran with several hard core rotary guys in the land of the half rising sun. High hp, low budget cars that were just as reliable as many other builds. Like any other engine build, you build it right and tune it right, it will do what you want it to and last. I've been around 550hp rotaries that saw 10k rpms every single week...that engine was built well before I got there, and blew up just before I left. 5+ years that motor lasted. And that wasn't uncommon...
I do laugh at a rotary engine tool box though. I think 3 or 4 sockets, a torque wrench, a screwdriver and thats about it. and of course a dremel, and a few carbides to get some power.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ffarm4.static.flickr.com%2F3261%2F2631372448_9ce16b8b05.jpg&hash=cb9bbf83cf078a4ac8a7c9aa6e75cfec80e328cd)
http://www.flickr.com/photos/fdokinawa/sets/72157605941242233/ (http://www.flickr.com/photos/fdokinawa/sets/72157605941242233/)
-
I miss my rotary. In due time, I will own another. They arent for the weak at heart.
Or the light of wallet. Or the people who need to get somewhere, no questions asked.
ha ha ha. so tru.
Peter, I wish you the sort of rotory reliability that only exists in Aaron Cake's fantasyland. You are a good person who deserves it. Whenever you drive your RX7 god almight should part the clouds and shine sunlight down on you while angels sing and shit.
Joey, I really wish you weren't so close minded about rotaries. I myself ran with several hard core rotary guys in the land of the half rising sun. High hp, low budget cars that were just as reliable as many other builds. Like any other engine build, you build it right and tune it right, it will do what you want it to and last. I've been around 550hp rotaries that saw 10k rpms every single week...that engine was built well before I got there, and blew up just before I left. 5+ years that motor lasted. And that wasn't uncommon...
I do laugh at a rotary engine tool box though. I think 3 or 4 sockets, a torque wrench, a screwdriver and thats about it. and of course a dremel, and a few carbides to get some power.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ffarm4.static.flickr.com%2F3261%2F2631372448_9ce16b8b05.jpg&hash=cb9bbf83cf078a4ac8a7c9aa6e75cfec80e328cd)
http://www.flickr.com/photos/fdokinawa/sets/72157605941242233/ (http://www.flickr.com/photos/fdokinawa/sets/72157605941242233/)
yah. like i was saying, it all depends. you can throw a junkyard engine together and it will last forever with a great tune, but you have a brand new engine with a poopy tune and youll hotrex it.
im still learning about tuning to this very day.
-
Stop making rotaries look bad..
And read something usefull to you
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pickingupgirls.com%2Fimages%2Fhp_book.jpg&hash=e1c650b00255e129bb66029d5f47fc3d813f8bd8)
-
Stop making rotaries look bad..
you obviously dont know anything. not only do i make them look good, but i have people give me props that are legends.
kinda like someone getting complimented by bisimoto.
-
kain sucks penis
-
Stop making rotaries look bad..
you obviously dont know anything. not only do i make them look good, but i have people give me props that are legends.
kinda like someone getting complimented by bisimoto.
Bisi isn't all that.
-
Stop making rotaries look bad..
you obviously dont know anything. not only do i make them look good, but i have people give me props that are legends.
kinda like someone getting complimented by bisimoto.
What happend? Aaron cake and rotarygod give you an
A+ pumpkin sticker for licking balls and tossing salad?
-
nah, i dont taslk to aaron cake much. rotary god, jim downing, and some others.